Error in the SMTP Configurations for File Server Resource Manager
Hello
Please help me how to configure SMTP for file server resource manager, when I have set up SMTP for gmail and godady e-mail I got the error.
Tags: Windows
Similar Questions
-
Original title: problem in installing FSRM
We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, open the FSRM in "All programs", its error message that gives as no network device connected. Suggest me!
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
-
Original title: Windows 8 will not start
I have a pre installed Windows 8 pro and have therefore no disks in the system. It does not start, but I get a message from the "Windows Boot Manager" with the message "Windows couldn't boot...". «, etc, etc and told to contact the ' system administrator or computer manufacturer...» "then the information:
File: \BCD
Status: 0xc0000098
Info: the boot configuration data file contains no valid information for an operating system.How can I get it back? Can I get a system disk or can I do?
Hi David,
Thank you for getting back to us with additional information.
If you have another computer with Windows 7 or Vista installed, you can create Windows 8 DVD installation of this system. But you need to get the product key Windows 8 of the manufacturer of the computer. Please refer to this link and create a DVD of Windows 8.
http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media
Hope this information is useful.
-
I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.
Thank you.
Remove the power supply and remove the battery
Press and hold the power button for 60 seconds
Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)
Click on the power button and more quickly, press F9
Follow the instructions to reset the computer to factory default
-
The Boot Configuration data file contains no valid information for an operating system
I have a Toshiba Satellite C55 B5200 running Windows 8.1 pre-installed. How ever when I boot, I get the Boot Configuration Data file does not contain valid information for an operating system to file: \BCD error Code: 0xc0000098
If I do a usb on a friends computer system recovery, it will affect the recovery of my computer? I don't have product key windows 8 as it was preinstalled. If I go down to the store, buy Windows 8.1 will be this also fixes my problem? Any help is appreciated
Hello
Please refer to this and see if it helps:
http://www.thewindowsclub.com/0xc0000098-error-Windows-8-help
Hope this helps, good luck :)
-
Hello
I'm putting it on oracle 11.2.0.1 to 11.2.0.3 DB level but during DBUA, I got error
"ORA-00205: error in the identification of control files, check the log of alerts for more information.
I have check the alerts log in E:\app\kmahalingam\diag\rdbms\orcl\orcl\trace\alert_orcl.txt
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SNA system picked latch-free 3
With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
Autotune undo retention is enabled.
IMODE = BR
ILAT = 51
LICENSE_MAX_USERS = 0
SYS audit is disabled
Commissioning:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With the options of partitioning, OLAP, Data Mining and Real Application Testing.
Windows NT Version V6.1 Service Pack 1
UC: 8 - type 8664, 8 physical cores
Process affinity: 0 x 0 x 0000000000000000
Memory (success/Total): Ph: 3241 M / 16383 M, Ph + FCP: 16565 M / 32765 M
Using parameters in spfile E:\APP\KMAHALINGAM\PRODUCT\11.2.0\DBHOME_2\DATABASE\SPFILEORCL server-side. ORA
Parameters of the system with default values:
process = 300
sessions = 472
memory_target = 3280M
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
DB_BLOCK_SIZE = 8192
compatible = "11.2.0.0.0."
db_recovery_file_dest = 'E:\app\kmahalingam\flash_recovery_area. '
db_recovery_file_dest_size = 3912M
undo_tablespace = 'UNDOTBS1.
Remote_login_passwordfile = "EXCLUSIVE."
db_domain = "cpg.com."
dispatchers = "(PROTOCOL=TCP) (SERVICE = orclXDB)" "
audit_file_dest = "E:\APP\KMAHALINGAM\ADMIN\ORCL\ADUMP".
AUDIT_TRAIL = 'NONE '.
db_name = "orcl".
open_cursors = 300
star_transformation_enabled = 'TRUE '.
diagnostic_dest = "E:\APP\KMAHALINGAM".
Fri Mar 07 00:33:15 2014
PMON started with pid = 2, OS id = 25072
Fri Mar 07 00:33:15 2014
PSP0 started with pid = 3, OS id = 25688
Fri Mar 07 00:33:16 2014
VKTM started with pid = 4, OS id = 27608 high priority
VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms
Fri Mar 07 00:33:16 2014
GEN0 started with pid = 5, OS id = 11484
Fri Mar 07 00:33:16 2014
DIAG started with pid = 6, OS id = 16980
Fri Mar 07 00:33:16 2014
DBRM started with pid = 7, OS id = 2200
Fri Mar 07 00:33:16 2014
DIA0 started with pid = 8, OS id = 8024
Fri Mar 07 00:33:16 2014
MA started with pid = 9, OS id = 15688
Fri Mar 07 00:33:16 2014
DBW0 started with pid = 10, OS id = 19908
Fri Mar 07 00:33:16 2014
LGWR started with pid = 11, OS id = 22616
Fri Mar 07 00:33:16 2014
CKPT started with pid = 12, OS id = 12828
Fri Mar 07 00:33:16 2014
SMON started with pid = 13, OS id = 10184
Fri Mar 07 00:33:16 2014
RECCE has started with pid = 14, OS id = 28984
Fri Mar 07 00:33:16 2014
MMON started with pid = 15, OS id = 22288
Fri Mar 07 00:33:16 2014
MMNL started with pid = 16, OS id = 12072
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
commissioning or shared server 1...
Environment ORACLE_BASE = E:\app\kmahalingam
Fri Mar 07 00:33:16 2014
ALTER DATABASE MOUNT
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:34:46 2014
ALTER DATABASE MOUNT
Fri Mar 07 00:34:46 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:45:51 2014
change the database editing
Fri Mar 07 00:45:51 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:48:13 2014
change the database editing
Fri Mar 07 00:48:13 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:52:34 2014
Derives from detected time. Check the file path VKTM for more details.
Fri Mar 07 00:53:46 2014
Closure of proceedings (immediate)
Closure of proceedings: in addition to logons disabled
Stop background MMNL process
MMON background process stop
The high waters = 1 license
All dispatchers/dispatchers and shared servers stop
ALTER DATABASE CLOSE NORMAL
ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
Fri Mar 07 00:53:49 2014
Stop background VKTM process
Fri Mar 07 00:53:51 2014
Instance shutdown complete
Fri Mar 07 00:54:01, 2014
Setting the default value of the parameter parallel_max_servers
320 to 285 because of the value of the process parameters (300)
Help, please
Thank you
According to spfile.
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
You mentioned
Davinapochon wrote:
E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL02. CTL file is there but there is no CONTROL01. CTL file.
So little confused here.
E:\APP\KMAHALINGAM\ORADATA\ORCL\--> must contain CONTROL01. CTL
E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\--> must contain CONTROL02. CTL
What is it now?
Anand
-
Original title: question of recovery of Windows 8I have a Toshiba laptop with windows 8. and this morning when I tried to turn it on, it's the message that is displayed:"RECOVERY".your PC needs to be repairedThe boot configuration data file is missing some required informationFile \BCDError code: 0xc000000d
you will need to use the tools of recovery on your installation media. "If you, etc.".There is no USB or CV came with the laptop. It is automatically installed when I first turned on.I was looking at a trip to this topic last night and everything was perfect, now, this morning, I get this message.I restarted the computer a few things, but this message is still there.My question is how can I get my laptop to work again, because I can't go in the computer to change the settings or options.Help, pleaseThank youWinnieHello
We are here to help.
You can perform the troubleshooting steps below:
Option 1: Windows startup parameters in the Windows recovery environment .
- Windows recovery environment, enter in safe mode. After you have successfully loaded in safe mode, perform the clean boot.
Option 2: restore your PC to an earlier point in time .
- Enter in the right edge of the screen and then click on Search.
- Enter the Control Panel in the search box, and then tap or click Control Panel.
- Enter the collection in the control panel search box, and then tap or click recovery.
- Press or click open system restore, and then follow the instructions.
Let us know how it goes.
-
syntax to enable AUTOMATIC backup for file server settings
According to the document of the oracle's RMAN can be configured to automatically back up the control file and the server settings file every time that metadata from database structure in control of changes in the file and each time a backup folder is added. Automatic backup RMAN can recover data even if the current control file and catalog file server settings are lost. »
I found the instruction for the control file, like:
RMAN > CONFIGURE CONTROLFILE AUTOBACKUP ON;
but, what is the syntax to enable AUTOMATIC backup for file server settings?
help please, thank you!automatic backup will take place of the control file and SPFILE. also whenever you have a backup statement in your RMAN script (e.g. database backup more archive), an automatic backup will be generated.
To activate the automatic backup of control file:
rman> CONFIGURE CONTROLFILE AUTOBACKUP ON;
-
LAPN300 - the best configuration for 3 access points, while using the same SSID
Hi all
What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?
I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.
What do you think? What is the best way or do, or could suggest you something else?
As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network? Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature? Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?
I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.
Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.
Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.
-
Original title: How can I restore my services to the default state.
Here is the error message when I try to start it manually to the top of some service programs.
"Windows cannot start the Diagnostic Policy on Local computer service."
"Error 1079: the account specified for the service is different from the specified account.
for other services running in the same process. »
Hi raospent,
1. have you made any hardware changes or software on the computer before this problem?
2. what services you try to start?
You can follow this link & check if it helps.
Hope the helps of information.
Please post back and we do know. -
Original title: I'm trying to start the Windows Firewall.
I'm trying to start Windows Firewall services, (administrative control / tools/services/windowsfirewall Panel) and error 1079: the account specified for this service is different from the account specified for other services running in the same process, rises. What should I do?
Hello
· You will remember to do recent changes on the computer before this problem?
· Logged in as an administrator on the computer?
I suggest you follow the steps mentioned below:
Method 1:
Follow the steps described in the following link and check if the problem persists:
http://support.Microsoft.com/kb/2478117
Method 2:
If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted, system files proceed to the following link:
http://support.Microsoft.com/kb/929833
Method 3:
If the previous step fails, set the center of security and its dependencies services to run under the Local Service account. Follow these steps:
a. Click Start, type services.msc and press to enter.
b. double-click Security Center, click on tab log.
c. Select "this account", click on the Browse button, type Local Service and click ok.
Type the password and confirm the password and click ok.
-
RV180W [IKE] ERROR: did not find configuration for
I have 1 or 2 of these messages per week.
Fri Sep 11 15:14:30 2015 (GMT + 0000): [*] [IKE] ERROR: did not find configuration for 85.25.43.94 [60105]
I have not any clients VPN active so do not know why I get these other than intrusions attempts.
Hello
You have tunnels VPN site-to-site configured in the router?
.:|:.:|:. CISCO | Russ Wyatt | Network engineer | Cisco technical support | [email protected] / * /
-
Yesterday, I downloaded Windows 8, and although using it was confusing I got the hang of it. Today, I used the computer again and everything was fine but then I stopped him and a few hours later, when I turned it on a blue screen appeared and he says:
RecoveryYour PC needs to be repairedThe Boot Configuration data file is missing some information required.Leader: \Boot\0xc000000dOT: After victory. Download 8 it won't launchI have no idea what is happening or how to fix it. Any help to help me understand and solve this problem would be appreciated.Met the same question from one day to the other - re install Win 8< week="" old="" decided="" to="" misbehave="" on="" a="" reboot.="" nothing="" untoward="">
In any case discovered that the automatic startup repair is less useless for me. He could not fix anything whatsoever after the diagnosis and just gave up.
However, resort to repair (start your windows installation CD) command line prompt, I managed to solve it with the command of the ffg on the command line.
Bootrec /rebuildbcd
More info about bootrec available using your favorite search engine.
for example, this site was useful for me
http://superuser.com/questions/451277/missing-boot-files-in-Windows-8
For users in previous posts with problems and have only a version downloaded to Win 8 - well I'd say that you yourself create a DVD of the version uploaded to win 8 - the installation program ask you if you want to create media - that will create a 4.x GB. ISO file that you can burn to DVD. There is enough information on how to do this just search online.
With regard to creating a way to initiate Win8 installer from USB Eh well I heard the ffg tool works with Win 8 too but cannot vouch for her since have never tried so its at your own risk.
http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool?ClickID=ckqs4fqifskwfnxlpiwkzwxqwwwzlvvlezzk
Good luck, have fun,
See you soon
-
I clicked on the "this automatically for files like this in the future" by mistake in the download dialog box. I want to open a pdf file in adobe when I click on the link. currently the file gets saved and I can't change it. I have read through the suggestions and go in tools > options > applications and reassigned the pdf options asking first and firefox always download just the files somewhere. I don't want this option and I need to uncheck the automatic box.
How then?
I really want to talk to someone on the phone.First of all, please update Firefox 18. Update Firefox to the latest version
Then read Firefox Refresh - reset the parameters and modules
-
I lost the installation media for windows server 2012 std
I lost the installation media for windows server std 2012, but I have the key. where I can download the media.
Please post your query to:
https://social.technet.Microsoft.com/forums/
Server issues are better addressed there.
Maybe you are looking for
-
The phone always connect to my macbook, but it won't download my photos because of not being able to enter the access code (the screen is broken and won't turn on). I tried everything I found on the internet including the three third party apps "valu
-
Get the QuickTime Player error has encountered an error and must be shut down
Whenever I try to oppen the QuickTime Player or QuickTime Updater, I get the message that it has encountered an error and needs to close. Anhyone know what can be wrong? If I try to remove the program and reinstall, I get the same message.
-
My computer became unusable constantly crashing, and I was hoping someone could go through the Crash dump information that I got from a recent BSOD. I have also some Event Viewer files that have a lot of errors, warnings, and some critics in them. Li
-
I've forgotten the master password for security
I forgot my master password when I want to record the passwords for the various Web sites. The following master password for security device window appears, and the password required to save a specific website password, that's what I forgot. I kn
-
How Essbase treats nets of the CPU?
HelloIn our environment, we have the following Solaris machine:Computer type: T4 - 1 8 Core SPARC SUNCPU speed: 2 850 MHzUC: 1Cores/CPU: 8Total number of cores: 8Memory: 32 GBOf these resources, 3 cores are available for Essbase 11.1.2.4. As we know