error in type:application/vnd.rim.cod of support not taken in charge during the installation of the web server

Similar Questions

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• error item not taken in charge on the RIO

  We have a project involving a RIO and a WSN, that has been put together for my by a value OR added reseller.  I can see the RIO and MAX WSN nodes and can connect to everything.

  When I look at the view of the project, I get a warning on the RIO (yellow triangle)

  By clicking on this I get "the plug in for the selected item is not installed on your system or the plug-in has an expired license, contact OR.

  Under MAX, tab software, we use LabVIEW 2011, with installed real time.

  I was told by the developer, I may have need ' Labview for wireless sensors networks OR ".

  I have installed ni_wns_130.

  What other driver should I. "

  Yes!

  That fixed it, that it was the missing file.  I had the RIO version 3, then to 4 upgrade fixed it.

  Thank you very much

• type of file, because the flow is not taken in charge or that there is a network error windows medi aplayer

  Original title: where should I go to report a question regarding a problem with Windows Media Player?

  Hello - I just upgraded my RealPlayer and I discovered that I can't read http://217.147.235.114 or http://folkradio.ge stream in Windows Media Player now - I either get a message saying that the file for the stream type is not taken in charge, (play the stream in RealPlayer).  I also noticed that one of the icons on my desktop to an audio file (barabombi.rm) has changed its former VLC icon to an icon of RealPlayer.  What happened, and how could I have Windows Media Player return as my default player for Folk Radio and VLC as default player for an audio file please?  Thank you!

  Hi Khevsur,

  · What version of windows media player installed on the computer?

  Try the steps listed in the link below and check if it will help: Windows Media Player Invalid File Format Error Message: http://support.microsoft.com/kb/234019

  To change the default program, you may consult: change the program by default, Windows XP uses to open a specific file type: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/filetype.mspx

• How to make a jad file and cod file to a single file for hosting on the web server

  Hello

  I want to make the jad file and cod file is a single file, which must be installed in the blackberry.

  When I load the jad without cod file file, it loads the app

  but when I load the jad file cod file, it loads the application on the blackberry device.

  I only want a single file to be uplaoded to the server for the installation of the application.

  Help, please

  I want it to install the web server to the BlackBerry smartphone.

  Thanks and greetings

  Anthony singh

  This is not possible, that both jad and cod is necessary to install an OTA application. the jad file contains a description of the application, the cod is the real application.

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Error video files uploaded to the web server

  Hi all. I get an error when I transfer my project on the web server. Everything works fine on the spot. I have a video that should play upon creationcomplete. When I run at the local level, no matter where I put the. FLV file and addjust the path accordingly, it works fine. For now, I put the FLV file to the root. All image paths work fine. But when I put the server, I get an error. I use mx:VideoDisplay. Following is the display code and the error message when I click on the play button. Do I have to do the code all ActionScript NetConnect and NetStream? Is there a MIME type that I need them to put it on the server? Thank you.
  
  I found this in the Docs, but it's not exactly my mistake. I ask the hosting company to consider.
  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_19439 & sliceId = 2
  
  The hosting server is Windows 2003 IIS 6 and see the URL is:
  http://www.mediatransferplus.com/MTP.html
  
  My Code:
  < mx:VideoDisplay id = "video1" source = "ComfortablyNumbFirstSolo.flv"
  autoPlay = "true" horizontalCenter = red "8" = "51" visible = "false".
  width = "328" height = "218" / >
  < mx:Button x = "10" y = "518" label = "Play" click = "video1.play ()" / >
  
  
  The error Code:
  
  Error: 1000: cannot connect to the server or to find FLV on the server.
  to mx.controls.videoClasses::VideoPlayer/play() [E:\dev\flex_3_beta3\sdk\frameworks\projects\ framework\src\mx\controls\videoClasses\VideoPlayer.as:1325]
  at mx.controls::VideoDisplay/play() [E:\dev\flex_3_beta3\sdk\frameworks\projects\framework\sr c\mx\controls\VideoDisplay.as:1462]
  to DPW / ___MTP_Button1_click ([C:\Inetpub\wwwroot\MediaTransferPlus\src\MTP.mxml:141])
  

  It was a missing MIME type.

  video/x-flv for the .flv extension must be defined on the server. Who did.

  See you soon!

• error: IMG-00705: not taken in charge or corrupted entry format

  I am trying to download a dwg document in database (using the form to the apex), and I get this error:
  
  ORA-29400: data IMG-00705 cartridge error: not taken in charge or corrupted entry format
  
  Only, I get this error when I download this document from computer with a software of CAD (dwg file is a CAD file).
  I get this error when I download a dwg file from another computer (without additional software CAD).
  
  Can someone help me with this problem?
  
  I don't know if it's useful, but it's the process that is triggered by my apex form to download a document:
  
  FUNCTION UPLOAD_DOCUMENT)
  FILE_N VARCHAR2,
  DOC_NAME VARCHAR2,
  DATE OF DOC_VALID_TO,
  t_type varchar2 default null,
  DOC_TYPE_ID INTEGER DEFAULT NULL) RETURN INTEGER IS
  number of l_file_id;
  l_thumb blob.
  l_file blob.
  l_mime_type varchar2 (100);
  l_version varchar2 (20): = ' 1.0';
  BEGIN
  
  Select mime_type, blob_content IN l_mime_type, l_thumb
  of wwv_flow_files
  where name = FILE_N;
  l_file: = l_thumb;
  
  IF UPPER (LPAD(l_mime_type,5)) = 'IMAGE' THEN
  ordimage. Process (l_thumb, 'maxScale = 125 125');
  ON THE OTHER
  l_thumb: = NULL;
  END IF;
  
  Select T_DOCUMENT_SEQ.nextval in the double l_file_id;
  
  INSERT INTO T_DOCUMENT
  + (annual, doc_name, doc_mimetype, doc_file, +)
  doc_valid, doc_size, DOC_THUMBNAIL, DOC_SYNONYM, doc_type,
  doc_last_version, DOC_TYPE_ID)
  Select filename, l_mime_type, l_file_id, l_file,
  DOC_VALID_TO, doc_size, l_thumb, t_type, DOC_NAME
  l_version, DOC_TYPE_ID
  of wwv_flow_files, where name = FILE_N;
  
  INSERT INTO T_FILE
  + (FLE_DATE, FLE_FILE, FLE_DOCUMENT_ID, FLE_TYPE, FLE_VERSION) +.
  VALUES
  + (Trunc (sysdate), l_file, l_file_id, 'DOCUMENT', l_version); +
  
  IF UPPER (LPAD(l_mime_type,5)) = 'IMAGE' THEN
  
  INSERT INTO T_FILE
  + (FLE_DATE, FLE_FILE, FLE_DOCUMENT_ID, FLE_TYPE, FLE_VERSION) +.
  VALUES
  + (Trunc (sysdate), l_thumb, l_file_id, 'THUMB', l_version); +
  
  END IF;
  
  delete from wwv_flow_files where name = FILE_N;
  
  COMMIT;
  
  RETURN l_file_id;
  
  END;

  This error is probably triggered by the call to ordimage.process. Have you been able to verify that? Since dwg is not a supported format, an error would be raised during a call to process.

  If so, is it possible that l_mime_type is different in the two cases? While where the error is not ordimage.process relief is not called?

  An image of type dwg can be charged even if it is not a supported format. But it cannot be processed.

  Melli

• error message "there is a communication problem with the web server."

  I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

  Hi, Mayhem15,

  See if this troubleshooting help.  It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• After installation of Medal of Honor in Windows 7, get the error DXGI_ERROR_UNSUPPORTED (not taken into "charge.").

  Original title: NEED HELP PLEASE

  Hello

  I installed the game Medal of Honor - Warfighter on my desktop pc with Intel(r) G41 Express Chipset. I have 2 GB DDR3 RAM & P4 Dual Core E5400 2.70 GHz CPU. I received the error message: failed to create D3D Device of at least 10.0 on adapter "Intel(r) G41 Express Chipset 'chauffeur 'Unknown'. The error is DXGI_ERROR_UNSUPPORTED (not taken into "charge."). I don't have any video card.

  I tried separately installation of DirectX 11, but the problem is not resolved. I use Windows 7 Ultimate x 86

  Kindly help me.

  Castelbajac

  ReadyBoost was intended to give a boost to the systems where only 1 GB has been installed and some of the RAM was shared with the video.

  This is no replacement for actual physical RAM, which is what your system needs for the game...

• Not able to connect to the essbase server: error 10061 NW

  Hi all

  I am currently working on Hyperion 11.1.2.3 and have installed Hyperion essbase and planning for the same thing. Until a few days back I was able to connect to my server essbase in environmental assessments, but now it gives me error that says: error: 1042006: Network error [10061]: unable to connect to [WIN - 1K6GBOF63C0:1423], where WIN-1K6GBOF63C0 is my machine name.

  Here is an excerpt of what I got from the newspapers essbase

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051283)

  Recovery of license information, please wait...

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051286)

  The license retrieved information.

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1051227)

  No JVM location specified in essbase.cfg. Will attempt to load the library path

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1311019)

  During the initialization of the JVM classpath: [; C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051223)

  Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: getInstance: impossible to get the instance of CSSSystem, please visit SharedServices_Security_Client.log for more information]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051198)

  Single Sign-On initialization failed!

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1056815)

  Essbase 64-bit - version 11.1.2 (ESB11.1.2.3.000B4412)

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051232)

  Using English_UnitedStates.Latin1@Binary as the locale Essbase

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051683)

  Try to recover the login information from the registry failed. Please check the reg.properties file, and then try again.

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051527)

  Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.

  I am able to open the workspace's shared services, but see the following in the Sharedservices_securityclient log

  [2015 07-12 T 00: 26:41.418 - 07:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A6jgDwW05zzWByW1LcXQY000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] failed to initialize the instance security EMP of Shared Services. Component marchandises9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is set to null in the EMP system registry. Check the configuration of the EMP system registry.

  [2015 07-12 T 00: 28:51.332 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:51.403 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20002] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.EPMSystem] [SRC_METHOD: getInstance] instance of security during the initialization of the SSP using the EMP system registry. It is a status messages. No action required.

  [2015 07-12 T 00: 28:52.340 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.184 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.606 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20005] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] started asynchronous user directory cache building user native Directory directory. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20007] [oracle. EPMCSS. CSS] [tid: 12] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0:3] [SRC_CLASS: com.hyperion.css.cache.ProviderCacheThread] [SRC_METHOD: run] group cache filled to the user native Directory directory and the size of the cache of the group is 1. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20331] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] building Cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20332] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] unify done cache and the object is set to the cached cache manager. It is a status messages. No action required.

  Any help is appreciated here.

  Thank you

  Dev

  The error being generated using relates to Essbase is not able to connect to the registry of SSP database, or the database is corrupt.

  Are a set of services to automatic, maybe that the database has not increased and running prior to Essbase trying to boot against the register of Shared Services.

  Confirm the relational database is finally up and running and you can connect, then clear the Essbase logs, start Essbase, and post again the same newspapers.

  See you soon

  John

• fatal error (taken too lon) during the installation of the downloaded for an hp laser jet 1536dnf printer driver

  Error, said it took too long and restart. I did three times and also have FIOS, so the connection speed should not be a problem.  Any ideas?

  My guess is that was a break in the internet service during the download.  I use a slower DSL connection and had problems downloading HP softwrare of the internet because of the size of the HP files (in general).  I would just try again a few times.  HP website, purely my guess, when downloads if it detects a problem, it stops the download (probably a safety precaution) as I have expereinced it several times but always a new attempt I finally get the files.  Again, I have DSL and on the slow end of DSL to whom, due to problems of connectivity in the County I live.

  Try it again a couple of times and see if it works very well.  I'll even throw this at you, my college years son used to go online late at night to play multiplayer games online with our DSL because he was liked late at night because of the use of the reduced customer.  So you can also try "" off-peak.

  Good luck!

• Configure the web server and application server deployment hangs in 11.1.2.2

  Hi all

  I want to install Hyperion 11.1.2.2 with Oracle 11.2.0.1 database. I installed all the modules successfully.

  At configuration time, I set up the Foundation Hyperion Essbase, planning and reporting with success.

  But the question, when try to configure HFM and FDM EMP Configurator crashes, in HFM Web server configuration and application Web of FDM configure FDM.

  I installed IIS, Oracle 32-bit and 64-bit, the Clients, and also configured DCOM.

  What comments can you do on this point, if any body faced the same question.

  See you soon,.

  Mady

  Hi all

  We reinstalled hyperion again

  then it works fine.

  Kind regards

  Mady

• Persistent error U43M1D205 on applications of CC code

  I can't update my Adobe applications.  I get the U43M1D205 error code, that tells me that the source of the download file is corrupt and wait a few minutes and try again.  It's been 24 hours to try and nothing updates.  I am running 2014.0.1 and I need to access the files that use more recent versions.  Can anyone advise me on what to do?  Thank you for your time.  I use a Macbook 2014 Yosemite 10.10.2 running

  Brendan,

  In this case I advise you to call by call/chat support where the agent can remotely on your machine and solve the problem for you.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Error code 64 c for update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Have tried to install KB2494113 - update of safety and he constantly fails to install. Help please as I know very little about the "intricacies" of my laptop

  Hi Phillipmuir,

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also check the following link and try to download and install the standalone update package:

  Update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Hope this information is useful.