Error in Windows Embedded studio this rchtx32.ocx cannot be saved.

Similar Questions

• When I try to access the Bluetooth program, receive error message: "Windows has stopped this program due to a Code 43 error.

  Original title: Code43 error (built-in) Bluetooth

  I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43

  that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result

  Hi DerekWilliams,

  What is the brand and model of your system?

  You can try the following steps and check if it helps:

  Method 1:

  Try to run the corner hardware store and check the issue.

  Convenience hardware store

  For more information, see the article:

  Code 43: Windows has stopped this device because it has reported problems

  Method 2:

  You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:

  For more information, see the articles:

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

• Error: c:/windows\system32\whatyouclickedon.msc the service cannot accept control message

  Help so confused trying to attach 1 get prob. an another system32 group policy error as no system restore and the control panel will not work correctly and sometimes logon I have no user profile

  someone please help im so confused, I got something weird, I guess that this auto downloaded on my computer do not know it showed up in my toolbar at the time and it looked like the symbol of windows firewall but wasn't it was a supposed antivirus program who wanted to buy me out well I got the blue screen a second after I saw it and my anti virus program did not I spent hours and now am Finally able to connect under normal start up instead of safe mode I think pretty well I found it, I saw an add on IE at the exact moment it happened and it turned off and was able to start fine have not seen since scanned for all after normal startup and he found nothing, but I find myself with these weird problems since this thing very happened from time to time as each start 2 ups or so on normal startup, I don't have any trash a few icons, fonts is very basic and small and it appears a message sayingsomething is wrong with the user profile and I restarted and everything comes back, but I try to get into the control panel and I can load it fine but when I try to enter the administration tools , it appears c:/windows\system32\whatyouclickedon.msc the service cannot accept control currently message I went to a Forum on here and read a similar and tried solution of type cmd at the command prompt in the search bar and he was able to load regularly but when tried run as administrator happens with the same message when I go into Control Panel as I prev said so I can't do the sfc/scannow and finally I tried to solve by doing a system restore but now it says the same message in the Control Panel, but before he kept coming because it has been disabled by group policy and when trying to get to the group policy I couldn't I'm so confused my head is spinning but I'm not completely stupid comp. don't know where to start or if all these things are a coincidence or really are related may not think about what I'm missing please help!

  You have not completely removed malware.

  Scan with this program:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

   

   

  Read all the information below before you start:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes after installation:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• Error in Windows Live Mail: "this application has requested execution to terminate in an unusual way.

  Occasionally, the following message appears when my wife receives an email from someone on facebook. "This application has requested execution to terminate in an unusual way" launches us live mail. It has something to do with Microsoft Visual C ++ Runtime library.

  Hi Bill

  Windows Live products have their own separate support forums.

  Please see the post below for the links to support for all popular Microsoft e-mail programs.

  Where can I get help with my questions by e-mail? (Windows 7)-Microsoft Answers:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/where-do-i-get-help-with-my-email-questions/461490c7-302b-4cc8-bcd9-127e177d71c3

  Concerning

• Error code 43 (Windows has stopped this device because it has reported problems) on nividia 8800 gt graphics card

  I have a computer with dual nvidia geforce 8800 gt graphics card graphics cards, but I recently started getting the following in my device manager error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  I started getting this message out of the blue after moving from my computer to another room.  I knowingly did not change anything on my PC and have been released for about 2.5 years with no real problems to speak of her.  I tried to uninstall and reinstall the latest driver from nvidia and had no luck.  I don't have access to the nvidia due to the device being disabled control panel.  Also I tried to restore my PC to a previous save point with no luck as well.  A short reading on nvidia forums led me to try a registry scan and repair, but alas it was without result.

  Any advice on what could be the cause of the problem and the best solution would be greatly appreciated.

  Hi rd,.

  You could try to remove one of the cards, then update the driver.

  They should use the same driver and may be coflicting at startup.

  You should also check the power supply if it is a few years old.

  Also make sure it is off enough electricity for the installation of the split card.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Product key for win 8 doesn't work no-error: this product key cannot be used to install a copy of windows retail.

  I bought a copy of windows 8 for the upgrade to windows 7 from the Microsoft store. I need to reinstall the hard drive on this machine, but when I download the installer of windows 8 on another machine to try to create a bootable USB I get an error message when I put in the product key (which I paid for) who says: this product key cannot be used to install a copy of windows retail.

  How can I get this problem?

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Ideally, there are two types of product keys: key to retail version key upgrade and full. The key to upgrade is used to upgrade the version of the operating system when you have the lower version of the operating system already installed on the system, for example, if you have already installed Windows 7 system, you can use the upgrade of Windows 8 to upgrade (override) currently installed Windows 7 to Windows 8. This product key cannot be used to download the installer of Windows 8 and create a bootable for installing Windows 8 from scratch.

  However, the key of the full version allows to download the installer of Windows 8 and create a Windows 8 boot disk to install a full version of the operating system.

  According to your description, you have reinstalled the hard drive on your machine and want to install Windows 8 by creating a bootable. Thus, you will always have the above error message while downloading executable files for Windows 8.

  There are two options you can try to install Windows 8 on your system:

  • Replace the key with a key to the version upgrade complete on the Microsoft Store and follow the procedure as you said in your post. You will not get the error message given.
  • If you have the Windows 7 installation media, you can try to install Windows 7 on the reinstalled hard drive. After activating this operating system, you can try to upgrade to Windows 8 by using the product key that you have already purchased.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• AMD Radeon HD: Windows has stopped this device because it has reported problems. (Code 43)

  In my device manager, in graphics cards, for my AMD Radeon 7500,7600 M graphics card in the series, the properties display the following error message:
  "Windows has stopped this device because it has reported problems. (Code 43) »

  I uninstalled the drivers and reinstalled them - it's the 12.104.0.0 version, which I have confirmed is the last. I have the Catalyst Control Center installed as well.

  Can someone help me understand this error? Why would he stop? What would be my next steps to try to solve it?

  See you soon,.

  Sam

  Hi thanks for trying, but the Dell drivers are those which deal with the problem of restart.

  I find the most recent driver Intel HD 4000 (Win64_15313_intel) and installed version, then I installed the latest drivers AMD (13-4_mobility_win7_win8_64_dd_ccc_whql_AMD) on the site of AMD. This solved my problems and my graphics card works fine now.

  So yes, just repeat those it tells me to install when I get my serial number and OS (Windows 7) were:

  Intel: 5423_Video_Driver_T6XGJ_WN_8.15.10.2669_A02

  AMD: 5423_Video_Driver_VGR24_WN_8.951.9.0_A02

  And these caused problems without end - the graphics card would not work, and then when I installed drivers from AMD, Dell, it would cause my system to reboot every 2 or 3 minutes. It looked like some kind of incompatibility between the two graphics cards and the drivers provided.

  The other representative of Dell told me the same thing that you - so I wanted to post my solution in case anyone else has this problem.

• I think Windows has stopped this device because it has reported problems. (Code 43) when connecting iPod to the PC.

  Original title: Code 43 problem

  iPod is no longer detected when plugged to the USB port.  Instead, I get the following error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  Crisis averted!  On another head shot... I thought that maybe the problem could be in the sync cable since the Apple store employee had no problem with the iPod.  I bought a new cable and the computer immediately recognized my iPod.  The old cable is now in the trash.

  Thank you for your help.

  Bob

• Error: Code 43; Windows has stopped this device because it has reported a problem whiel trying to use Cyberlink Webcam

  Title: cannot activate cyberlink webcam

  My cyberlink webcam was working fine until today. It will not turn on. After you apply the troubleshooting suggestions, I received a reply as follows: 'windows has stopped this device because it has reported a problem. (code 43) What is - this and how to solve my problem. I have a HP Pavilion g6. Help, please!

  Hello

  -Did you do changes on the computer before this problem?
  -What is the operating system installed on your computer?
   
  The error code you get is due to one of the engines that controlling the device notified the operating system that the device has failed in some way.
  Method 1: Run the Microsoft FIXIT from the link and if the problem persists.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2: Uninstall and reinstall the USB controllers
  You can try to uninstall the drivers and also scan for any hardware changes in Device Manager.
  (a) open Device Manager by clicking Start , and then type Device Manager.
  (b) expand the Controllers of Bus USB section by clicking on the '+' sign.
  (c) Uninstall each of the devices under the USB Controller section by right-clicking on each one, and then click Uninstall.
  (d) close the Device Manager and restart the computer.
  Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.
  For reference:
  Updated a hardware driver that is not working properly
  http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Method 3: If the problem persists, I suggest you to follow the steps from the link and check if it helps.
  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873 (WS.10) .aspx
   
  Hope this information helps.

• Whenever I try to update Windows I get this message; Error number: 0 x 80244004

  Please tell me how to solve this problem. Whenever I try to update Windows I get this message; [Error number: 0 x 80244004] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  Original title: Please help me solve this problem I can no longer update Windows XP!

  The website has encountered a problem and cannot display the page you are trying to view.

  There is an MS article that lists some measures to this error message. Have a look at it and try the steps in there. It should help:

  http://support.Microsoft.com/kb/883614

• Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will be closs after several attepts.

  Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will close after several attempts.

  The message above appears on start up. Want to know how to prevent it from happening?

  Hello

  • What were the changes made before the show?
   
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  I hope this helps.
  
   

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• This message came when I started my PC "Runtime Error C:/windows/system 32 NVVSVC.exe."

  This message came when I started my PC "Runtime Error C:/windows/system 32 NVVSVC.exe. This application has requested the execution in an unusual way. For more information, contact the application support team"

  original title: runtime error

  Hello

  What video card do you have in your system?

  Method 1:

  Update the Nvidia display driver.

  A. close all programs. This will ensure that the programs do not interfere with the update of the driver.

  B. right click on desktop, and then click Properties. This will bring you from the System Properties menu.

  C. click Device Manager

  D. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.

  E. right click on the adapter, then select Properties.

  F. 6Click tab driver. This tab displays information about the current driver, as options to update, delete or back the driver.

  G. click on update driver.

  H. two options will be listed. One is for your computer to find a new driver and the other he find location drivers. Since we have the pilot, we will click Browse, and then select where the driver is located.

  J. click Next. The computer will try to install the display driver. If he succeeds, the new view will be loaded

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Uninstall and reinstall the driver Nvidia.
   
  Step 1
  Uninstall the device from Device Manager (Nvidia card) driver.
  A. right-click on the icon my computer
  B. Select manage from the menu.
  C. Select Device Manager from the system tools that are listed in the resulting display.
  D. right-click on the device.
  E. click on the driver tab.
  F. click on uninstall.
  G. restart the computer
   Step 2: Download the driver from the device manufacturer and install.

• Error when you try to start Windows Live Messenger: this application didn't start because the d2d1.dll is not found

  I get this error for windows live messenger when I start msn _ (THIS APPLICATION COULD NOT START BECAUSE it could NOT FIND a d2d1.dll, PLEASE REINSTALL AND perhaps THE PROBLEM will BE SOLVED))

  I HAD A PROBLEM WITH MSN

  1. I DID FORMAT MY PC AND I START FROM THE BEGINNING

  2. I DID ALL THE UPDATES

  3. I INSTALLED WINDOWS LIVE ESSENTIALS 11

  4. ONCE I INSTALLED WINDOWS LIVE ESSENTIALS 11 I BEGINS AND IT WORKS WHEN I REBOOT MY PC AND I START IT AGAIN, I GET AN ERROR SAYING

  (CETTE APPLICATION POURRAIT PAS DÉMARRER parce QUE ne pourrait PAS TROUVER UNE d2d1.dll que s'il vous PLAÎT RÉINSTALLER ET PEUT-ÊTRE LE PROBLÈME SERA RÉSOLU)).

  WHAT IS THE PROBLEM?

  PLEASE LET ME KNOW THAT I DON'T KNOW WHAT ELSE DO

  Not certain how much this will help, but Windows Live questions should be handled by Windows Live Solution Center.
  This is the Windows Live Solution Center Portal:
  http://windowslivehelp.com/

  I hope that you will get a resolution from the experts here.
  One thing... they aren't this quick response to questions. I said that my personal experience. So, be patient. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to repair this error C:\Windows\System32\mscoree.dll__

  How to repair this error C:\Windows\System32\mscoree.dll

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If necessary:

  Mscoree.dll could not be found error resolution
  http://pcsupport.about.com/od/findbyerrormessage/a/mscoree-DLL-not-found-missing-error.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.