Error installing software Portege R500 to fingerprints under XP

Hello, I install XP on Portege R500 and all the drivers from the Toshiba site. After installing the software of fingerprint AuthenTec worm: 1.1.11.8 and restart error of: fingerprint identification system TrueSuite Access Manager:

EventType: BEX P1: P2 FPManager.exe: 1.1.11.8 P3: 471317a 0
P4: FPSuites.dll P5: 2.2.13.19 P6: 4733c92a P7: 00003628
P8: c0000409 P9: 00000000

Do not send

I'm trying to install the driver without software but it's impossible.

Thanks in advance.

Hello

Have you installed the following things all enforcement facilities contained in the Instructions of facilities?

Tags: Toshiba

Similar Questions

  • Error installing software

    I tried to install the software for Hp photosmart B110 on Hp pavillion 11 x 360 but although any downloads when it comes to insalling a message comes up saying "file not found" and everything stops. The printer itself works very well with the laptop but I need the scanner!

    Hello
    Follow the steps below and check if it solves the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

    Now, try to reinstall the HP software and check if the installation goes as planned.

    If the problem persists, continue following the steps below:

    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    Kind regards
    Shlomi

  • Error installing CS3 Design Standard on iMac under Snow Leopard (10.6.8)

    I had a fully functional installation of CS3 on my iMac (Intel 2.16 MHz) and had a hard drive crash.

    After replacing the hard drive, I reinstalled from my original disks, but get the following message is displayed:

    "License for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance.

    I uninstalled the program (and ran the cleaner Adobe CS)... then reinstalled.   Same message.

    I contacted Adobe installation media and told me that it is a product and they are unable to offer support. I find this unsatisfactory response to a minimum.

    I'm puzzled because these programs were run very well before the crash... and all other software are back.

    I need this feature, but cannot afford to move at this time.

    Suggestions?  Thank you.

    Try http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  • Error message: the software can be installed by using the command "run under...". ».

    I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

    Try right click on the setup.exe > run as admin.

    If this does not work, try the Vista Hardware and drivers Forum:

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    See you soon.

    Mick Murphy - Microsoft partner

  • Portege R500 - fingerprint reader and SD card reader does not work

    Hello

    I hope someone can help me.

    I bought an opportunity Portege R500 (the warranty is still available until 12/2010) and set up with Windows 7 Home Premium.

    I installed all the drivers for Windows 7 from the specific model support page. Driver Vista have been installed for all drivers, which are not available in Windows 7.

    If everything works fine, except the fingerprint reader and the sd card slot.

    Fingerprints: I tried al a lot of drivers, even that of the R600 and R700 (such as proposed by someone here in the forum). When I run the Toshiba fingerprint utility, a text box tells me, that there is no connection with the sensor. Authentc software does not work either.

    SD card reader: I tried several SD cards from a card SD 2 GB simple and old (but functional) Kingston. According to the Director of devicce, the driver is correctly installed and running.
    The blue icon next to wireless light turns on and after a "long", a message box appears and asks me to format the card. It takes a little longer and then I get the massage, the card cannot be formatted. I tried the same procedure with a SDHC card 4 GB and a Micro SDHC card in a SD card adapter. Then of course the cards are identified but not usable and formatted.

    There are several reports of other users of the internet, the locations of sd card in computer models laptops different toshiba have problems under Windows 7.

    The two problems have emerged as well under Vista. My hope was, this upgrade to Win 7 solve poverty. Unfortunately remain the problems of th I have Win 7.

    Thanks in advance,

    Michael (Germany)

    Thanks for the feedback second
    By the way; It is a forum for user to user in this community, everyone is trying to help everyone, so if someone wants to say that he would be able to help, then you will get a response from such user maybe you should also pass a few simple threads in this forum and might help other users as well?

    Tip; BIOS update and setting BIOS by default (with F9) can solve many problems... it's worth a try...

    By the way; Win 7 is able to update the drivers automatically. I recommend that you run an update in Device Manager and let windows search for the update.

    I ve got another laptop and installed Win 7 as well. The card reader Vista driver has worked for me on Win 7 OS just a tip

  • Fingerprint sensor can be found on Portege R500

    Since my Portege R500 has recently developed a habit of not being able to find the fingerprint sensor.
    I have re-installed Truesuite (new version 2.0.2.0) but that didn't improve matters.

    On startup, I get an error software fingerprinting system is not available.
    At the start of TrueSuite, trying to footprints fingerprinting registration, I get a message "cannot open the sensor.

    Am I missing a driver or so (at the start there is also a cryptic message on a port USB)

    Any ideas?

    It of difficult to say why the new fingerprint driver or software does not solve your problem

    The whole story is really mysterious.
    The European driver Toshiba page provides the AuthenTec fingerprint software (v2.0.2.0)
    If reinstalling this software does not help the question must relate to a corrupt Windows Vista files and in my opinion that using the Toshiba Recovery CD should help.

    A question:
    Have you installed SP1?

  • Portege R500 Fingerprint Utility not recognizing Win 7 password

    Hello

    I have Toshiba Portege R500 with Windows 7 Pro connected to SBS2008 field. Some time ago, I changed my password of domain, utility prints password digital (FPU) asked for the password, but after that I put it it says that the password is incorrect.

    I changed the password and reinstalled the software, still does not. It seems that the FPU has no access to the Windows password or remember the old password. Help, please.

    Best,
    D

    Hello

    I got this Toshiba FAQ on the fingerprint and the question of password field.
    http://APS2.toshiba-tro.de/KB0/TSB0702ZC0000R01.htm

    You don't know if this could help you but try to install the latest Toshiba Fingerprint Utility of the Tecra A11.
    Maybe it helps good luck

  • Portege R500 - utility of fingerprint stopped working

    I have a laptop Portege R500. The utility of fingerprint stopped working. First (perhaps after an update of the real Suite Acess Manager was installed a few months ago) it did not work when connecting, but worked for the other passwords.

    Now it doesn't work at all. If I try to record fingerprints, told me that he has failed to locate the sensor. I reinstalled the driver AES1610 and TrueSuite access manager, but it makes no difference.

    In Device Manager it says the device is working. I looked at different threads on this without seeing something that works.

    Hmm, maybe you should try to clean the registry once the fingerprint software has been uninstalled.

    In your case, I would follow this:
    -Uninstall fingerprint software and remove the fingerprint device in Device Manager.
    -restart the laptop
    -clean the registry using the free tool called CCleaner
    -Restart once again and install the software and driver
    -Restart once again and test the functionality of fingerprint

    Welcome them

  • Failing utility Portege R500 fingerprint after upgrade to Windows 7

    Just, I improved my Portege R500 to Windows 7 (clean install) and downloaded the latest Tosh utilities and install.

    When I tried to set up the utility of fingerprints by the registration of fingerprints, I get to the end where I am asked to register the imprint, and then get the message "operation failed. Model duplicate already exists. "

    Can anyone help please?

    Hello

    Seems there is something wrong with the registration of fingerprints for me it looks like the old fingerprints are still present, somewhere in the registry or on the folder of files to HARD drive.

    I think you should first remove the traces of fingers and then have to uninstall the software.
    After this should clean the registry using a tool like Ccleaner.
    Restart the unit. Install the VAP (value added package) and fingerprint software!

    I hope this helps!

  • Portege R500: login screen don't work with fingerprints

    Hello!

    I have Toshiba Portege R500.
    When I used Windows Vista - I have a problem.

    Now I install Windows 7 and therefore: If the laptop was restart or stop - on the windows login screen do not biometric.

    Only enter password at the keyboard. If put into hibernation or sleep - everything ok, biometric works normally.
    I try Windows 7 32-bit and 64-bit.
    Same problems.

    Help me, pls.

    Hello

    Please try to install the new software of fingerprints for Win 7.
    AFAIK the R700 protégé was equipped with fingerprint too.
    Try the software of fingerprint for R700.
    It s version 1.0.2.27

  • I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error

    I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error

    Try to reset the App Store:

    Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

    Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

    Then reconnect to the iTunes Store.

    Also try by going to settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow. Try to install again.

  • Portege R500 - start of fingerprinting release

    Greetings.

    I have a problem with my Porteg R500 with HARD drive. I activated the "Single Sign on" in order to use my fingerprint only once a boot, the heading "Power Pre-os by fingerprints" (TrueSite Access Manager software).
    When I turn on my laptop, after the BIOS check, I wonder to slide my finger on the sensor. I do, but the system hangs upward, with the screenshot of software TrueSite still. No way to use the keyboard (without CTRL-ALT-DEL allowed; if you press CAPS LOCK, SHIFT, there no led lights, etc.), and he remains hung up that I've shut it down by holding the power button.

    Anyone know what's the problem? My BIOS firmware is updated (version 1.60)

    Thank you.

    Hello

    Has this issue been published since the beginning? I mean from day of purchase?

    In my view the OS and Access Manager software TrueSite is confused upward.
    Who knows why, but I think you have to use your Toshiba recovery disc and put the laptop to the factory setting.
    Then update the AuthenTec fingerprint software.

    Then, you can follow with the configuration of the fingerprint as described in the help of AuthenTec.

    I think you should check this!

  • Portege R500 - blue screen after installing Windows XP SP3 home edition

    * computer toshiba Portege R500 laptop *.

    * non-modele ppr50e00j00fs4 *.

    SP3 installed via update-site, received successful message SP3 installed restart... now bluescreen an impossibility to restart! Not even in save mode!

    If I try to start with the InstallationRecommandations, I get the following message:

    STOP: 0X0000007E (0XC0000005, 0XF79ED8EB, 0XF79ED7F4, 0XF79ED4F0)

    Can someone help me please?

    Hmmm. seems that this is a known Microsoft issue because I found these MS knwoldge base article:

    How to troubleshoot a Stop error 0x0000007E in Windows XP
    http://support.Microsoft.com/kb/330182/en-us/

    Microsoft has stated that:

    + These problems may occur if a system thread generates the error handler catches not an exception. You receive this error message if one or more of the following conditions are met: +.

    + If this issue occurs after the first restart during Windows Setup, or when the Setup program is finished, the computer does not have a sufficient disk space to run Windows. +
    + If this problem occurs after the first restart during the installation of Windows, or once the installation is complete, the computer's BIOS may be incompatible with Windows. +
    + Incompatible video card drivers. +
    + A chauffeur service or system device damaged. +
    + If the problem is associated with the Win32k.sys file, it can be caused by a control program remote third +.

    I recommend checking the solution proposals published on the website of Ms.

    Good bye

  • Portege R500 - is not reading DVDS and software of DVD writer?

    We have a few notebooks Portege R500 and put our brand on them image very well.
    I can't find the DVD playback software and the software editor of DVD on the download site, is it available? It comes pre-installed on the computer, but we do not want to use the image it comes with.

    Thank you

    This additional software is only part of the image of Toshiba and can be downloaded from the Toshiba driver page!
    If you want to use the software if you need to buy a version full or you will switch to the image of Toshiba.

  • Portege R500 - error message "sound device is not supported" THotkey

    Hello

    Whenever I have start up my Portege R500 I get THotkey message error "sound device is not supported. \
    The same error message repeats when I touch the volume icon. There is also no sound.

    Any idea what causes this? I have tried to uninstall and reinstall the driver most that can affect the shortcut key and the sound.

    Thank you

    Nico

    Is it Vista or XP?

    Have you installed Windows yourself or it was preinstalled?

    Maybe the wrong driver was installed (of another model for example).

Maybe you are looking for