Error: Invalid active path "vacuum /... /.. '. /.. "/ cocos2dx/platform/third_party/blackberry/libraries/x86/libgrskia.so".

Hello

I got this error when you try to compile a project of cocos2dx of the Hello world on the emulator. Any idea?

Thank you.

Most likely you are missing libgrskia.so (as shown in the error)

Tags: BlackBerry Developers

Similar Questions

importFile(); Error: Invalid path

I'm trying to import an ASP in an active PEA. When I run the script in Extend script, it works fine, but when I try to run within the ASP I get an error: invalid path.
myFile = "myProject.aep"; var
app.project.importFile (new ImportOptions (file ("GFXM1/folder /" + myFile)));
GFXM1 is a server (not sure it's important). I tried adding "Volumes /" in front of GFXM1, but it still does not work.

You may need to add a slash "/" in front of the Volumes that this directory is at the root of the filesystem OSX.

in Windows XP when I try to remove or add a program, Error 1324 the path my pictures contains an invalid character

in Windows XP when I try to remove or add a program, I get "Error 1324 the path my pictures contains an invalid character"

Hello

1 is applicable to all programs that you are trying to install this question?

See the methods listed in the section below and check if this helps you resolve the issue.
You may receive one of three error messages when you try to install Streets and Trips or MapPoint
http://support.Microsoft.com/kb/894510

I hope this helps.

Error 1324. Path my pictures contains an invalid character during the withdrawal of Mgr access VZ.

Originalt title: Error 1324. The path my pictures contains an invalid character. I get this message when I try to remove a program. I'm trying to retire an old version of VZ access Mgr please help with this problem. Thank you.

Error 1324 the path my pictures contains an invalid character. Fatal error during installation.

Hi Kurt wolfe,

This happens because the value type for the wrong shell folder, or due to incorrect data in the registry. To resolve this problem, solve the My Pictures Shell folder paths in the registry accordingly. The default values are given in a column in a table in the following article. There is also a REG fix available on the next page:

Windows stores the location of special folders by user under the following registry key:

HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------user Shell folders

Microsoft has a Fix - It solution that fixes most of the paths of shell (shell by both user and computer files) folder automatically. You can download the fix from.

You receive an "Error 1606" error message when you try to install or remove a program from Microsoft
http://support.Microsoft.com/kb/886549

Note: The error message may vary, but you can give it a try and see if the problem is resolved.

Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Windows 2003 server the trial verson activation error: "invalid product key. Pls Help.

I am trying to activate my trial 360days WIn 2003 version but the error: "INVALID PRODUCT KEY".

Please any help?

It seems that the trial was for the RC2 release of the server - not the release.

It is time-bommbed and it has expired yonks.

Invalid Image path

Hello
I started having a few problems icon with an existing working version of my application that has already been built and uploaded to Apple without problem. When I now build this, I get the following errors of two icon;
ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"
ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"
I managed to build and release this same .zip (expect a version and the version code change) in mid-August, but he now will no longer build. I have run back through aid and checked my path to icon, everything seems in order (and all the other icons are working / not to Miss).
As follows, the referenced files in the config.xml file are different from those that Apple reported lack;
< platform name ="ios" >
<!-iPhone Spotlight and icon settings->
     < icon CBC = "res/icon/Icon-Small.png" width ="29" height ="29" />
     < icon CBC = "" res /icon[email protected] " " width ="58" height ="58" />
     < icon CBC = "" res /icon[email protected] " " width ="87" height ="87" />
...
<!-IPad Pro->
     < icon CBC = "res/icon/Icon-167.png" width ="167" height ="167" />
</ platform >
I'm not referencing or other icon files Apple claim are missing for example; "[email protected]" and I can't that assume it is something BMPS incorrectly adds to my package when compiling?
Note:
I checked the build log and it seems to ignore my request for [email protected] one copy only the small and the small@2x:
CopyPNGFile build/myapp.app/icon-small.png myapp/Resources/icons/icon-small.png
/ Project CD
/Applications/XCode.app/Contents/developer/usr/bin/copypng-Compresser /project/myapp/Resources/icons/icon-small.png /project/build/myapp.app/icon-small.png
CopyPNGFile build/myapp.app/ [email protected] myapp/resources/icons/[email protected]
/ Project CD
/Applications/XCode.app/Contents/developer/usr/bin/copypng-Compresser/project/myapp/Resources/icons/[email protected] /project/build/myapp.app/ [email protected]
Does anyone have any ideas or suggestions?
See you soon.
PS: PGB - app id is; 2244914

Fixed - I was still building with an older version of Phonegap (5.4.1) for plugin compatibility and have increased now that 6.3.0, it includes such icons as expected.

My guess is Apple now requires these files (from my generation) and Phonegap did not know what were these the 5.4.1 version.

See you soon,.

ERROR: Invalid Allocation, 1610612738 bytes in Links 2003 running Windows 7 ultimate 32-bit edition

Hello

To solve the problem that I have, program uninstalled, rebooted machine. Has conducted an audit of the registry and remove the entries from 7 registry errors in Links 2003. Rebooted the machine. Installed Links 2003, installed patch 1.05, 1.07, and Links2k3-nvidia_win7_FINAL. I also tried to launch, links 2003 Safe Mode and still, I get this error message: ERROR: Invalid allocation, 1610612738 bytes. Any help would be greatly appreciated.

ERROR: Invalid allocation, 1610612738 bytes

Processor registers EAX = 0 x 00000000 EBX = 0 x 00000000 ECX = 00000000 EDX = 00000000 Flags x 0 x 0 = 0 x 00000000
= ESI = 0X00000000 EDI 0X00000000 EBP = 0X0012F4A8 ESP = 0X0012F348 EIP = = 0X00000000
EIP (0X00000000)? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??
ESP (0X0012F348) 0012F35C 0012F634 0012F62C 01DC3DC0 60000002 00010000 000001A 9 03C20DE0
00000100 0000002D 01DC4258 00000200 0000003D 01FDFDB0 76F5491C 00000014
75206AC4 84027F1C 00000674 75206E93 75206E9E 0031007E 75206E9E 004C002E

Details of the machine
===============
Name of executable: C:\Links 2003\LINKSMMIII. EXE
Executable hour, date: 19:49:12 Tuesday 3/30/2010
Command line:
Current directory: C:\Links 2003
Currently, date: 19:05:49 Tuesday 6/22/2010
GameOS build version: Version 1.1 02/11/2000
Software rasterizer: c:\links 2003\assets\binaries\blade.dll (size 282 693 bytes)
Username: Mike Harrison
Computer name: HICHAMCHGORA
Processor: 2812 MHz AMD 3DNow unknown MMX! Model SSE = 10, Type = 15, Stepping 0 = (6 processors)
Cache information: unknown
L2 w/r/rw speed: 4 cycles 22496 Mbps, 4 cycles 22496 Mbps, 4 cycles 22496 Mbps
Main memory r/w/rw speed: 14 cycles 6427 MB/s, 13 cycles 6921 Mbps, 10 Mbps 8998 cycles
W/r/rw video memory speed: 204 cycles 441 MB/s, 38 cycles 2368 Mbps, 289 cycles 311 Mbps
W/r/rw memory AGP speed: 204 cycles 441 MB/s, 37 2432 Mbps, 288 cycles cycles 312 MB/s
Operating system: Windows (6.1.7600)
DirectX version: 9.04.00.0904
Since booted time: 2 h 45 m 25 s
In the logic of the game time: 0 h 0 m s 0.62 (on frame 3)
App running time: 0 h 0 m s 0.62
Physical memory: 2 147 483 647 bytes (2048 Meg)
Physical memory available: 2 147 483 647 bytes (2048 Meg)
The swap file size: 4294967295 bytes (0 Meg)
Available page file: 4294967295 bytes (0 Meg)
Virtual memory: 2,147,352,576 bytes (2048 Meg)
Virtual memory available: 1,937,620,992 bytes (1848 Meg)
Amount of the used battery: 3172 bytes
Memory load: 31%
Desktop video mode: 32bpp 1920,1080
Mode when the accident occurred: full screen 1920 x 1080 x 32 (NVIDIA GeForce GT 220)
Networked Machine: No.
Executable version: 01.08.06.2200
PCI Chipset: unknown

Path of Threads process Pri
==========================================
TaskHost.exe: 8: 8: C:\Windows\system32\taskhost.exe
DWM.exe: 13:5: C:\Windows\system32\Dwm.exe
BCU.exe: 8:6: C:\Program Files\DeviceVM\Browser Configuration Utility\BCU.exe
RoxioBurnLauncher.exe: 8:8: C:\Program SharedCOM 2010\Roxio Burn\RoxioBurnLauncher.exe
VxBlockServer.exe: 8:5: C:\Program Files\Common PX storage Engine\VxBlockServer.exe
SetPoint.exe: 8:5: C:\Program Files\Logitech\SetPoint\SetPoint.exe
KHALMNPR. EXE:-08:27: C:\Program Files\Fichiers Files\Logishrd\KHAL2\KHALMNPR. EXE
RtHDVCpl.EXE: 8, 9: C:\Program Files\Realtek\Audio\HDA\RtHDVCpl.EXE
Skype.exe: 08:20: C:\Program Files\Skype\Phone\Skype.exe
LinksLauncher.exe: 8:1: C:\Links 2003\LinksLauncher.exe
LINKSMMIII. EXE: 08:16: C:\Links 2003\LINKSMMIII. EXE

Version numbers of DLLS
===================
Msvcrt.DLL - Version 7.0.7600.16385 - found in C:\Windows\system32
'Msvcrtd.dll' is not found
Msvcirt.DLL - Version 6.1.7600.16385 - found in C:\Windows\system32
'Msvcirtd.dll' is not found
amstream.DLL - Version 6.6.7600.16385
Quartz.DLL - Version 6.6.7600.16385
Ir50_32.DLL - Version R.5.10.15.2.55
Dsound.DLL - Version 6.1.7600.16385
Dinput.DLL - Version 6.1.7600.16385
D3dim.DLL - Version 6.1.7600.16385
Ddraw.DLL - Version 6.1.7600.16385
dplayx.DLL - Version 6.1.7600.16385

Audio device 0 (current) - (HW disabled mix)
==============
Description: Realtek Digital Output (Optical) (Realtek High Definition Audio)
Driver file: {0.0.0.00000000}. {cdc8ecc5-7109-4d8d-9ac9-dacfb4f56528}
Data of the driver file: can not find the driver file
CERTIFIED: No.
EMULDRIVER: No.
CONTINUOUSRATE: Yes
PRIMARYMONO: Yes
PRIMARYSTEREO: Yes
PRIMARY8BIT: Yes
PRIMARY16BIT: Yes
SECONDARYMONO: Yes
SECONDARYSTEREO: Yes
SECONDARY8BIT: Yes
SECONDARY16BIT: Yes
MinSecondarySampleRate: 100
MaxSecondarySampleRate: 200000
PrimaryBuffers: 1
MaxHwMixingAllBuffers: 1
MaxHwMixingStaticBuffers: 1
MaxHwMixingStreamingBuffers: 1
FreeHwMixingAllBuffers: 0
FreeHwMixingStaticBuffers: 0
FreeHwMixingStreamingBuffers: 0
MaxHw3DAllBuffers: 0
MaxHw3DStaticBuffers: 0
MaxHw3DStreamingBuffers: 0
FreeHw3DAllBuffers: 0
FreeHw3DStaticBuffers: 0
FreeHw3DStreamingBuffers: 0
TotalHwMemBytes: 0
FreeHwMemBytes: 0
MaxContigFreeHwMemBytes: 0
UnlockTransferRateHwBuffers: 0
PlayCpuOverheadSwBuffers: 0

Video device 0
==============
Description: NVIDIA GeForce GT 220
Company / Chipset: nVidia.
Driver file: nvd3dum.dll
Driver size: 9 386 600 bytes
Driver date: 22:55:32 Saturday 4/3/2010
Attributes: Final Version, Private Build
Driver version: 8.17.11.9745
Version: 8.17.11.9745
Hardware ID: 10DE.0A20 (Rev 162, Subsys 0 x 12253842)
Video memory: 2,375,872,512 bytes (2266 Meg)
Mem texture map: 1,034,485,760 bytes (987 Meg)
AGP texture memory: 1,341,386,752 bytes (1279 Meg)
Modes of FourCC: NV12 NV24 YV12, UYVY, YUY2 AI44 AI88 AYUV AIP8 AV12 PLFF NVMD NVDP NVDB SSAA ATOC
Texture formats: 555 1555 4444 565 0888 8888 bump N→∞ (8,8) bump map N→∞ (8,8) FourCC (1TXD) FourCC (2TXD) (3TXD) FourCC FourCC (4TXD) FourCC (5TXD) FourCC (SCVN) FourCC (UHVN) FourCC (SHVN)
Z buffer formats: 16 bit Z 32 bit Z (Z = 32 (0xffffff00) template = 8 (0xff)) (Z = 32 (0xffffff) template = 8 (0xff000000)) 32 bit Z 24 bit Z
modes 16 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
mode 32 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
CERTIFIED: No.
DRAWPRIMITIVES2: Yes
DRAWPRIMITIVES2EX: Yes
DRAWPRIMTLVERTEX: Yes
FLIPINTERVAL: Yes
FLIPNOVSYNC: Yes
NO2DDURING3DSCENE: No.
NONLOCALVIDMEM: Yes
NOPAGELOCKREQUIRED: No.
CALIBRATE the GAMMA: No.
PRIMARYGAMMA: Yes
ZBuffer: 16 24
Rendering depth: 16 32
Texture size: 1 x 1 to 8192 x 8192
Maximum U, v coords: 8192.0
Cutting guard :-100000000,-100000000 to 100000000,100000000
AlphaTest NotEqual: Yes
Lack of mixture of the CBC:
Lack of mixture Dest:
Texture AGP: Yes
Texture coords: 8
Mix the steps: 8
The Textures of max: 8
Hardware T & L: Yes
Vertex Blending: 4
Maximum lights: 8
Clip planes: 8
Mix Lightmap: Ok
Mix Specularmap: Ok
Mixture of detail: Ok
Vid linear memory: Yes
SELECTARG1: Yes
SELECTARG2: Yes
ADD: Yes
ADDSIGNED: Yes
SUBTRACT: Yes
MODULATE: Yes
MODULATE2X: Yes
MODULATE4X: Yes
BLENDCURRENTALPHA: Yes
BLENDDIFFUSEALPHA: Yes
BLENDTEXTUREALPHA: Yes
BUMPENVMAP: Yes
BUMPENVMAPLUMINANCE: Yes
DOTPRODUCT3: Yes
ANISOTROPY: Yes
ANTIALIASSORTINDEP: Yes
FOGTABLE: Yes
FOGVERTEX: Yes
FOGRANGE: Yes
WFOG: Yes
WBUFFER: No.
MIPMAPLODBIAS: Yes
WBUFFER: No.
ZBUFFERLESSHSR: No.
MIPNEAREST: Yes
LINEARMIPLINEAR: Yes
DONOTSTRIPELEMENTS: Yes
TEXTURE CLAMP: Yes
BORDER TEXTURE: Yes
MIRROR of TEXTURE: Yes
ALPHAGOURAUDBLEND: Yes
SQUAREONLY: No.
COLORFLATMONO: Yes
COLORGOURAUDMONO: Yes
COLORFLATRGB: Yes
COLORGOURAUDRGB: Yes
SPECULARFLATRGB: Yes
SPECULARGOURAUDRGB: No.

Video device 1
==============
Description: NVIDIA GeForce GT 220
Company / Chipset: nVidia.
Driver file: nvd3dum.dll
Driver size: 9 386 600 bytes
Driver date: 22:55:32 Saturday 4/3/2010
Attributes: Final Version, Private Build
Driver version: 8.17.11.9745
Version: 8.17.11.9745
Hardware ID: 10DE.0A20 (Rev 162, Subsys 0 x 12253842)
Video memory: 2,375,872,512 bytes (2266 Meg)
Mem texture map: 1,034,485,760 bytes (987 Meg)
AGP texture memory: 1,341,386,752 bytes (1279 Meg)
Modes of FourCC: NV12 NV24 YV12, UYVY, YUY2 AI44 AI88 AYUV AIP8 AV12 PLFF NVMD NVDP NVDB SSAA ATOC
Texture formats: 555 1555 4444 565 0888 8888 bump N→∞ (8,8) bump map N→∞ (8,8) FourCC (1TXD) FourCC (2TXD) (3TXD) FourCC FourCC (4TXD) FourCC (5TXD) FourCC (SCVN) FourCC (UHVN) FourCC (SHVN)
Z buffer formats: 16 bit Z 32 bit Z (Z = 32 (0xffffff00) template = 8 (0xff)) (Z = 32 (0xffffff) template = 8 (0xff000000)) 32 bit Z 24 bit Z
modes 16 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
mode 32 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
CERTIFIED: No.
DRAWPRIMITIVES2: Yes
DRAWPRIMITIVES2EX: Yes
DRAWPRIMTLVERTEX: Yes
FLIPINTERVAL: Yes
FLIPNOVSYNC: Yes
NO2DDURING3DSCENE: No.
NONLOCALVIDMEM: Yes
NOPAGELOCKREQUIRED: No.
CALIBRATE the GAMMA: No.
PRIMARYGAMMA: Yes
ZBuffer: 16 24
Rendering depth: 16 32
Texture size: 1 x 1 to 8192 x 8192
Maximum U, v coords: 8192.0
Cutting guard :-100000000,-100000000 to 100000000,100000000
AlphaTest NotEqual: Yes
Lack of mixture of the CBC:
Lack of mixture Dest:
Texture AGP: Yes
Texture coords: 8
Mix the steps: 8
The Textures of max: 8
Hardware T & L: Yes
Vertex Blending: 4
Maximum lights: 8
Clip planes: 8
Mix Lightmap: Ok
Mix Specularmap: Ok
Mixture of detail: Ok
Vid linear memory: Yes
SELECTARG1: Yes
SELECTARG2: Yes
ADD: Yes
ADDSIGNED: Yes
SUBTRACT: Yes
MODULATE: Yes
MODULATE2X: Yes
MODULATE4X: Yes
BLENDCURRENTALPHA: Yes
BLENDDIFFUSEALPHA: Yes
BLENDTEXTUREALPHA: Yes
BUMPENVMAP: Yes
BUMPENVMAPLUMINANCE: Yes
DOTPRODUCT3: Yes
ANISOTROPY: Yes
ANTIALIASSORTINDEP: Yes
FOGTABLE: Yes
FOGVERTEX: Yes
FOGRANGE: Yes
WFOG: Yes
WBUFFER: No.
MIPMAPLODBIAS: Yes
WBUFFER: No.
ZBUFFERLESSHSR: No.
MIPNEAREST: Yes
LINEARMIPLINEAR: Yes
DONOTSTRIPELEMENTS: Yes
TEXTURE CLAMP: Yes
BORDER TEXTURE: Yes
MIRROR of TEXTURE: Yes
ALPHAGOURAUDBLEND: Yes
SQUAREONLY: No.
COLORFLATMONO: Yes
COLORGOURAUDMONO: Yes
COLORFLATRGB: Yes
COLORGOURAUDRGB: Yes
SPECULARFLATRGB: Yes
SPECULARGOURAUDRGB: No.

Hello again,

I want to thank each and everyone of you for your input to try to help solve the problems I've had with links.

I am happy to report that I played my first round in nearly two weeks in this... Morning. The problem is a corrupted file, .l3. I have a little more 1 100 PoliAnis' and am not sure which one is, but I can play. I tried whenever I took one of the following folders on until I finally took the PolyAni folder:

WAVs, mops, Custom photos of players, sky, Clubs, PIN code files and finally, all but one of PolyAni files. That after taking all but one of the frequented out of the folder PolyAni links has started without giving me the error of attribution not valid.

Thanks again to you all for your help.

Sincerely,

Mike

Really_Rotten

clear an error: invalid value "1.0.0.0" request-requires-System. "

Hey everybody. Recently my app had accepted in App World, and now I have to finally move to sign my application. I followed the steps listed HERE, and everything was fine until I actually went to sign my bar... it throws the following error:

clear an error: invalid value "1.0.0.0" request-requires-System. "

I have searched the forums and found this but (which also led to this), I came across another problem. I've been working out of my project of Mobile Flex using the SDK of heroes and everything seemed fine. It debugged very well, installing BAR was very good and above all, it has been accepted by RIM. I thought it was no big thing, but now I run into issues. The discussions I linked to had a response from an official developer of running off of the latest version of the SDK (0.9.3), but my project says that the SDK is not compatible with mobile projects.

Someone at - it suggestions? I hope I don't have to redo something here, but I tell myself that I'll do all what I need to do my application upwards and running as it should. Thanks in advance guys!

Edit: another suggestion was actually go in my manifest file in the META-INF and remove this line of text. I can do this, but I don't know what effect it will have and I suppose you far, far smarter than me. If I try to go and screw with my files, it can't end well.

Haha what do you mean you're not too bright. you really made the right decision here. in the first step of creating a project, you can choose the Flex SDK hero. You cannot choose the BB SDK because it works only as a reference library.

If you go into Preferences > Flash Builder > target platforms, what do you see here?

22 - Beta - Image invalid air path

I recently spent the 19 Air to Air 22.0.0.149
When I tried to download from the app store using the application loader (ios AppStore) I got this error.
ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"
ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"
ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"
ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"Icon.png"
ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles": 'icon-small - 50.png'.
ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles": 'icon-small - 40.png'.
ERROR-ITMS-90032: "path of the invalid Image - no image found at the location referenced under key"CFBundleIconFiles": 'icon - Small.png'."
I use the same configuration as for 19 Air and all the icons appearing in the error messages exist. I never had this problem with 19.

I found a solution!

I don't really know what was the cause of this problem or if it's the best solution.

But what I did to create an empty project in xcode, adding all the icons under Assets.xcassets.

I then ran the application on my device, looked up where the debugging API was located.

Excerpt from IPA (changed .zip to .ipa and unzipped)

Then open the application (right click, show package contents)

Then I copied all the files icon png and used instead of the original when I compiled the ipa with Air 22.

Do not know if some of the original png icons has been altered somehow in some way.

But when I compiled all the png has been included in the ipa.

Error in Active Directory operations

Hello
I'm just trying to test the new 4.1 installed so as a virtual machine and now trying to join the ESXi announcement, I get the following error: "error in Active Directory Operations.
Also when I try to join the ESXi using the DC IP it says the domain name contains invalid characters quite confusing...?
Also, I checked the Date and time as well as DNS and routing config.
Everything seems fine but still does not work.
Any help is welcome.
Thank you

Ran into the same issue this week. Support and after an hour we arrived anywhere. So, I continued to try different settings and finally found my way in.

In my case, I was using my own account and I had kerberos authentication or by neutralising, so make sure that the account you are using is a domain administrator (a permission to join/create the computers in the domain) and is not or by neutralising prior authentication.

The other question was about the domain name and user name. For the domain use the domain (mydomain.lcl) FULL name. To user your account , do not use the mydomain\youraccount format. Even though I read that you can enter it like that, he did does NOT for me.

What 3 things fixed my problem. Now, all of my guests are on the field.

I hope this helps...

AUSST - update server problem: 406 IIS7 errors and ERROR: Invalid webfeed

I spent today, configure, and install an instance of the software AUSST2.0, according to http://www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Up dateServerSetupTool_TechNote.pdf
Here is where I am:
Via Firefox/IE, I get the following when you browse the Updaterfeed.xml:
XML Parsing Error: syntax error
Geographical area: < SITE SERVER >
Number of row 1, column 1:
0001
^
Which I think is ok... the server sends the updaterfeed.xml. I can also download updates directly via IE or Firefox. The corresponding entry in the IIS log is:
/AdobeUpdate/webfeed/OOBE/aam20/win/updaterfeed.XML - 80 - < IP ADDRESS > Mozilla / 5.0 + (Windows + NT + 6.1; + WOW64; rv:9.0.1) + Gecko / 20100101 + Firefox / 9.0.1 304 0 0 196
When I try to do an update via Photoshop, I get:
"The update server is not responding. The server may be offline temporarily, or the settings of firewall or internet is perhaps incorrect. Please try again later. "Error code: U41M1C213"
Regardless of the status of firewall locally or on the server. Further communication with the server is fine.
the level 10 aamu.log says:
2012 01-17 T 20: 01:52: slurpURL entry: (http://< SERVER IP > / AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml) bytesPushed
2012 01-17 T 20: 01:52: main download loop - pending the availability of the network
2012 01-17 T 20: 01:52: network connection
2012 01-17 T 20: 01:52: connected to: = http://< SERVER IP > /AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml
2012 01-17 T 20: 01:52: received the status of the server code
2012 01-17 T 20: 01:52: slurpURL: (http://< SERVER IP > / AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml) bytesPushed = 0
2012 01-17 T 20: 01:52: CFU (Webfeed): dumping webfeed: C:\Users\ < USER MY name > \AppData\Local\Adobe\AAMUpdater\1.0\Data\webfeed.xml
2012 01-17 T 20: 01:52: CFU (Webfeed): ERROR: Invalid webfeed. Could not read webfeed sequence number.
2012 01-17 T 20: 01:52: UCGetprogress: (B) turning with value = 1
2012 01-17 T 20: 01:52: UCGetprogress: updates State for back reffId =
2012 01-17 T 20: 01:52: UCGetprogress: updates return State = 41
2012 01-17 T 20: 01:52: UCGetprogress: check the updates of returning outError = 213
2012 01-17 T 20: 01:52: UCGetprogress: check the updates percent return = 0
2012 01-17 T 20: 01:52: UCGetprogress: updates to string of unique return error code = U41M1C213
2012 01-17 T 20: 01:52: UCGetprogress: (D) poll with value = 1
2012 01-17 T 20: 01:52: entered < < UCGetUserPreferences > > call.
2012 01-17 T 20: 01:52: < < UCGetUserPreferences > > call back with the return value - = 1
The following IIS log entry for this is:
GET /AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml - 80 - < IP ADDRESS > AAM + Updater + 1.0 406 0 0 19
I added the < add name = "SSINC-xml' path ="*.xml"verb =" "*" modules = "ServerSideIncludeModule" resourceType = 'No' > to my web.config, by http://blogs.adobe.com/oobe/2010/09/enterprise-in-house-update-hosting-pour-cs5.html "
I keep getting the error U41M1C213 while updating. I can get updates when I remove the AdobeUpdater.Overrides of C:\ProgramData\Adobe\AAMUpdater\1.0 (Win7)
Help?
* by evasive: http://forums.adobe.com/thread/951039 -> http://forums.adobe.com/thread/951039 -> here.

Hi MUIT2012

I also I got exactly the same problem, but I thought I'd follow upward with my real fix, as looking for "U41M1C213" through google gave this position, as well as your other constantly.

After digging through responses to blog on this thread > http://blogs.adobe.com/oobe/2010/09/enterprise-in-house-update-hosting-for-cs5.html< i="" did="" find="" the="" answer="" from="" both="" christopher="" kinard="" and="" travis="" henry="" which="" ultimately="" fixed="" this="">

I'll walk through the general setup
- I followed this guide for the initial synchronization of AUSST2.0 + IIS7 configuration of a site: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v2_1.pdf
- Then according to the advice of people I have credited above, suppliment what the above deployment guide said and add SSI for all types of file you put into managers of IsapiModule (zip, xml, crl, dmg and GIS). I added the via the UI Manager to IIS, rather than manually typing in the web.config file. See screenshot of the final outcome of all additional mappings and an example entry below:
Hope this helps anyone who might be struggling with this, because it does not seem to be very well documented.

ORA-29280: invalid directory path
do face a problem,

My requirement is I have to brought from a schema for a remote database my current schema some procedure, packages, functions scripts and compile them here in my current schema.
Basically, straight word what I have to do is, all functions, procedures, are there packages in the remote schema (that I can access by a datbase link) must be created in my current schema.
so I got what I was trying to make is just source codes to access all_sources and creating files in a code here directory.giving.

First, what I've done is created an Oracle Directory.

First I created a directory called "PROC_PKG_FUNC" in drive D, then I ran the following command.

SQL > create directory 'PROC_PKG_FUNC' as 'D:\'PROC_PKG_FUNC ';
Created directory.

CREATE or REPLACE PROCEDURE Get_Db_Ddl_Scripts as
v_file Utl_File.FILE_TYPE;
v_file_dir VARCHAR2 (50);
i_first_line NUMBER: = 1;
BEGIN

v_file_dir: = 'PROC_PKG_FUNC ';

FOR REC_OBJ IN
(SELECT a DISTINCT NAME, TYPE, DECODE (TYPE, 'FUNCTION', 'FUNCTIONS', 'PACKAGE', "PACKAGES", "PACKAGE BODY ', 'PACKAGES_BODY'," PROCEDURE", 'PROCEDURES', 'TYPE', 'TYPE', 'TYPE BODY', 'TYPES_BODY') v_file_dir)
FROM ALL_SOURCE@FRISKDEVI41B_ORCL WHERE OWNER = 'FRISKDEVI41B. '
AND TYPE IN ('FUNCTION, PROCEDURE, 'PACKAGE', 'PACKAGE BODY', 'TYPE'))
LOOP
v_file: = Utl_File.FOPEN (card = > REC_OBJ.v_file_dir,)
filename = > REC_OBJ.NAME | ".sql",.
OPEN_MODE = > 'w ',.
max_linesize = > 32767);
i_first_line: = 1;
FOR REC IN (SELECT TEXT FROM ALL_SOURCE@FRISKDEVI41B_ORCL WHERE NAME = REC_OBJ.NAME AND TYPE = REC_OBJ. TYPE AND OWNER = 'FRISKDEVI41B' ORDER BY LINE)
LOOP
IF i_first_line = 1 THEN
Utl_File.put_line (v_file, "CREATE or REPLACE" |) REPLACE (REC. TEXT, CHR (10), NULL));
ELSE Utl_File.PUT_LINE (v_file, REPLACE (REC. TEXT, CHR (10), NULL));
END IF;
i_first_line: = i_first_line + 1;
END LOOP;
Utl_File.FCLOSE (v_file);

END LOOP;

END;
/

but when I try to run this am getting error,
ORA-29280: invalid directory path
ORA-06512: at "SYS." UTL_FILE", line 33
ORA-06512: at "SYS." UTL_FILE", line 436
ORA-06512: at "SYS." GET_DB_DDL_SCRIPTS', line 15
ORA-06512: at line 2

I know probbaly get this error because I am trying to create different directories, just like functions packages etc. under the external using this loop recording repertoire, but how would it be possible, please help.

Kind regards
Manuella
In oracle when you say that CREATE or REPLACE the DIRECTORY you do not create a directory in the operating system, you simply create a reference to the directory in the operating system.

So I don't know what you're asking.

ERROR: Invalid input. home page loading IE load properly?

Try to load the homepage of our local Government to the:
http://www.addisontx.gov
results in a blank screen otherwise with the following message is displayed at the top left:

ERROR: Invalid input. Use the back button on the browser to go to the previous page.

This page will load free error in Internet Explorer. The problem existed before my update of Firefox in version 9.0.1

Hello

Please try after deleting cookies and if it persists, try a Ctrl + F5 refresh: (Alt + T) Tools > clear recent history... (or Ctrl + Shift + Del), next to range of time:, select all, click Details , and check the Cookies. CTRL + F5 Refresh allows bypasses cache and brings in the new page.

Clear recent history

...............................................................................................................................

Useful links:

Everything on tools > Options

Beyond the tools > Options - about: config

Subject: config entries

Information page (Alt + T) tools > Page Info, right-click > view Page information

Keyboard shortcuts

View without Plugins

Files & Firefox profile folder

Firefox commands

Basic troubleshooting

After the upgrade

Safe mode

Extensions of the issues

Troubleshooting Extensions and themes

Troubleshooting Plugins

Test Plugins

upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

TT2

Version with ControlLogix - link cRIO (implicit messaging), "(Code 16 #0315) problem" connection request error: invalid segment type ""

I have developed and delivered a system in Germany several years ago. He worked then. But the cRIO was damaged and replaced by a newer model, and does not now. I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer. But I do not have access to the system myself, and correspondence is slow and tedious.

The original system was a cRIO-9073, developed with LabView 2009. He used the implicit Messaging. The ID of Instance, sizes, IP addresses, etc everything has worked very well.

The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc. Programs FPGA and processor are responsible and seem to work in the cRIO. The "EthernetIP Set Assembly Instance Data.vi' will return no error. But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "." We looked at intellectual property (the mistake was different), sizes and body #s.

The PLC doesn't have to all be modified.

Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0? Or if there are all the other required packages?

I am including the NOT-Max reports.

Hi ZX81

To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.

You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.

Utility of RAD

WenR

Error: Invalid active path "vacuum /... /.. '. /.. "/ cocos2dx/platform/third_party/blackberry/libraries/x86/libgrskia.so".

Similar Questions

Maybe you are looking for