Error - line is used or not connected when sending fax machine in Windows XP.

Similar Questions

• How can not connect when sending an email in blackberry

  Hello

  I need to send e-mails by the Transport.send () method, but I think that it will be connected.

  And, since there will be a lot of emails per day, there are too many newspapers in sent emails.

  How can he not shown in the [mail/sent items]?

  Thank you

  Jerry

  Before deleting the message, make sure that the Message.Status of the Message has changed to TX_SENT, which indicates that it was sent.

• Whenever I try to send a fax, I get error "no dial tone was detected. The telephone line is busy or not connected to the computer. »

  Whenever I try to send a fax, I get: "no dial tone was detected. The telephone line is busy or not connected to the computer. "Any ideas?

  You can't send a FAX via a connection to broadband. Fax is essentially specialized phones and requires that a service composition is used at BOTH ends.

  You can buy an analogue Fax/modem (USB types work well enough) or use a service to convert fax email...

• How can I disable the CS3 when I get an error message that I am not connected to the internet when I am?

  Try to deactivate CS3 from a computer to reload on another. Get the error message that I am not connected to the internet.

  It is NOT correct. Customer support can handle deactivations of CS3. Use Web Chat here:

  Serial number and activation support

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I get error messages on my dial-up connection when I don't have a dial-up access!

  Original title: "Windows Mail problem"

  When you use Windows Mail, I got error messages on my dial-up connection when I don't have a dial-up access! Is no more, I can send or receive mail using windows mail. I have a connection high speed and have never had this problem before? Can you help me?

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection. It shows for the connection?

  You should leave this setting not selected, in this case Windows Mail will use any connection IE uses.

   

  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.

   

  If you still have the same problem later, the account may be damaged. Remove account, restart Windows Mail, and then recreate the account.

   

  Gary van, Microsoft MVP (Mail)

  "RhondaRLee" wrote in the new message: * e-mail address is removed from the privacy... *

  When you use Windows Mail, I got error messages on my dial-up connection when I don't have a dial-up access! Is no more, I can send or receive mail using windows mail. I have a connection high speed and have never had this problem before? Can you help me?

  Gary van, MVP (Mail)

• End points (anchor) does not connect when applying my own brush created rolling mill

  Hello ppl,

  I am so new att this brush model... never used until now. I tried to create a template, but when applying in a line, the model is not connected. A small space is visible... dunno what I missed...

  I create as a model of brush and use the default settings.

  

  It seems that your model line has "round caps" applied to the outline.

  

  ... so) (vs] [, perhaps it is perhaps the issue?])

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone please tell me how to proceed? __

  error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone tell me please how to do this?

  Hi vivasiousv,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  See the links in the Apple Web site and try the steps mentioned below.

  http://discussions.Apple.com/message.jspa?MessageID=6096760

  http://discussions.Apple.com/message.jspa?MessageID=8436848

  For additional support post your query in the Apple discussion.

  http://discussions.Apple.com/category.jspa?categoryID=150

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't spend 6 s iphone to 9.3, get error message that I am not connected to the internet.

  I can't move my 6s iPhone to ios 9.3. My phone currently has ios 9.2.1.  I get an error message that I am not connected to the internet during the update tries to go through the verification step. I checked that I am connected to the internet. I turned my phone off and tried again but same error message

  Hi - I'd wait to make the update you will see elsewhere in these issues forums with hyperlinks in mail, messages, and Safari does not. I wish I had waited...

• Satellite A20-S103: no internet - no media not connected when typing ipconfig

  Hello

  A few days ago I installed windows xp on my Toshiba (SA20-S103).
  I installed all the drivers, but the internet does not work.

  It telling me 'no media not connected' when you type Ipconfig.

  Anyone know if the problem has to do with the drivers for the ethernet (Realtek RTL8139/810 x Family Fast Ethernet NIC) card or chipset drivers. I tried so many drivers, but can not solve the problem.

  Greetz

  Hello

  Have you checked if the network adapter driver has been correctly installed and if there is no yellow exclamation point in Device Manager?

  My own knowledge of the message no media connected is displayed if the LAN cable is not properly connected or the cable is broken.

  Should check this too!

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.

  This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.  How to work around this issue and get this downloaded.

  Lisa, please try of products download Premiere Elements | 10, 11, 12, 13 and let us know if you need help with this.

  Atul_Saini

• Status window component-fax fax Windows does not appear when sending or receiving

  I can send and receive faxes using Microsoft fax in windows component, but fax status window does not appear when sending or receiving.  How can I fix?

  Assuming that long ago, that you have installed Service Pack 1 for Windows XP, your problem may be a badly configured third-party firewall.  See http://service1.symantec.com/SUPPORT/nip.nsf/4a29389c214c78ea88256c75005f451a/713afacbd4135e0a88256c77007e526f?OpenDocument

  Also take a look in the event viewer (start > run > eventvwr > OK) for errors or warnings related to the fax system.  If you find one, double-click on it to open the event properties, and click on 2 pages below the up/down arrow icon to copy the events to the Clipboard.  Then paste it in your response.

• For some reason, I can't get my Outlook Express to send my emails... they do not connect or send failed

  For some reason, I can't get my Outlook Express to send my emails... they do not connect or send failed... what I am doing wrong to cause this... I have used Outlook Express in the past and had no problem with it... Also, how can I know what e-mail programs POP3 or request the program Outlook Express? Could you please clarify this for me, thanks...

  I use Windows Live Mail as my regular e-mail address... but I can use a different e-mail to another e-mail program to configure Outlook Express?

  Visit the website of your email provider and see if they have instructions to set up an account in Outlook Express.  They provide you with the appropriate settings.   Nobody here knows them, because they are specific to the e-mail provider.  So check with your provider of messaging on the correct settings to use for OE.

  Steve