Error loading C:\DOCUME~1\NETWORK~1\NTUSER.dll__error loading C:\DOCUME~1\NETWORK~1\NTUSER.dll__

Similar Questions

• When you try to run the Network Setup Wizard, I get error loading rundll hnetwiz.dill.

  Trying to set up home networking on my windows xp, I get this message ("error loading hnetwiz.dll specified module is not found") I'm sorry I'm dumb as a box of rocks...

  Hello pat,

  You're trying to network the two versions of Windows by following the instructions in this article?
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Receiver error message: "error loading the TCP MIB library" when you try to configure a network printer on Windows 7.

  I can't find the answer anywhere else online. I get the error message: "error loading the TCP MIB library" when you try to configure a network of Xerox on Windows 7 printer.

  Steps to follow:
  (1) install the drivers
  (2) add printer > local printer > create a new Port > Standard TCP/IP / IP address
  (3) error message

  Can test the printer.
  Others may use the printer at the same IP address.

  Any other suggestions?
  Thank you!
  Angie

  Can be caused by corrupted files win7 or third parties who have replaced the ones win7

  (for example, ntprint.dll, tcpmib.dll, mgmtapi.dll, smmpapi.dll)

  Maybe run scanow, the System File Checker

• Error loading C:\windows\iambcex.dll error codes

  Original title: error codes
  On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
  Error loading C:\windows\iambcex.dll
  Error loading C:\windows\iyigexindoduse.dll

  A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Error loading c:\windows\apoyuwax.dll and load c:\windows\apieta2.dll error

  Error loading c:\windows\apoyuwax.dll and error loading c:\windows\apieta2.dll what I need to fix this and if so, how?  Using Dell Dimension 8250 and XP Professional

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• "error loading c:\windows\system32\sshnas21.dll" and stop c000021a

  2 problems-1 - error loading c:\windows\system32\sshnas21.dl--2 - root cause found c000021a error checking, settings = oxo, oxc0000001, ox98879140, ox1105e4, boot critical file is damaged.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• When Vista starts, getting the error "Error loading C:\Windows\system32\sshnas.dll this module specific point is not found"

  When I start my PC it opens as soon as my desktop appears on the screen, error loading C:\Windows\system32\sshnas.dll the specified module could not be found.  How can I fix it?
  * original title - need HELP, Windows System 32 error *.

  Hello

  who is / was malware or a boot remains for her entry

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error message: "error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found."

  I have an error message box that always appears at the start of my computer.  It says: "Error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found." I have a Dell Laptop Inspiron 1720 running Vista. I just 'X' it out and continue on but would like to get rid of it.  I don't know that it's touched something that needs correction.  Thank you

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Run dill error... Error loading C\User\Admministrator\App Data\local\ifificawajurija.dll access is denided, what, why? How can I fix it?

  Error loading C\User\Admministrator\App Data\local\ifificawajurija.dll access denied, what, why? How can I fix it?

  It started the night with a black screen and the white Messenger active but I was unable to do anything. Took me most of the day and night to be able to close completely portable!

  Today, I can start but now get the error posted above. I can't use one of my system tools, such as defragmenting, disk cleanup or fix it! Nothing.

  I'm not very computer savey when it comes to computer repairs, I rely on others or my Windows Vista "Simplified" book, and it does not cover this problem.

  Please, can you help me.   Thank you.

  Hello

  Google has nothing that suggests it might be the malicious program or a start remains entry against malware

  http://www.google.com/search?hl=en&source=HP&q=ifificawajurija.dll&aq=f&aqi=&AQL=&OQ=

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• At the start, get error loading driver udesiab.dll

  on startup, I get an error loading driver udesiab.dll, no matter who with an idea what is this driver or how can I remove it?

  Hello

  read the slot results in google for "udesiab.dll."

  http://www.google.com/search?hl=en&source=HP&q=udesiab.dll&aq=f&aqi=&AQL=&OQ=

  There is no search results for her that usually indicates that it is malware or a stay starting entry of for her

  to be on the good side for malware scan;

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• SL500 "ERROR LOADING OPERATING SYSTEM"

  Hello

  I've only had my SL500 for about 3 weeks. The other day I turned it on only to be greeted with the "ERROR LOADING OPERATING SYSTEM" line. I turned off and restarted entering setup of Bios, the option that I've changed the parameters 'SETTINGS USERS DEFAULT to LOAD' to "CHARGE MANUFACTURERS DEFAULT SETTINGS" saved and restarted start.

  The system then displays the following lines before Vista is loaded:

  For the Gigabit Ethernet Realtek RTL8111B/8111C v2.13 controller (071227)

  PXE - E61: Media Test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  I tried the system restore to the previous point (i.e. before I started getting the error message), which did not work. Then I did the factory restore to see that the same problem was still there.

  Any help on this would be greatly appreciated.

  U Da Man, I rearranged the startup options so 1. CD/DVD 2. HARD DRIVE 3. Removable device 4. Network, rebooted twice, no problem!

  Why they would set HDD the fourth boot option?

  Thank you very much Gary, you did my headaches disappear.

• "Error loading operating sytem!" on Satellite A55

  I'm going to reformat Toshiba Satellite A55 Series for Windows XP. It is said that he cannot reformat the C drive and HDD may be damaged and to quit smoking just press F3, and then I press F3.
  But it said "error loading operation of the sytem!

  What should I do to fix this? Anyone who can help me what about this one?

  Thank you!

  Hello

  If the hard disk is damaged there is a single Exchange of hard drive solution. For this laptop model hard drive isn't cheap and I think that it is better and easier to solve this problem.

• Satellite L300D: error loading operating system - Ubuntu Linux

  The easiest way, you could any body help me with "error loading operating system"!
  Completely screwed?

  have you checked whether your CD s severe correctly?
  What distribution you install?