Error loading c:\program files\arcadeweb\arcadeweb32.dll at startup
Original title: error loading c:\program files\arcadeweb\arcadeweb32.dll
I get the error message (error loading c:\program files\arcadeweb\arcadeweb32.dll) I click ok and it goes away, but returns the next time I bring my computer. Place UN til yesterday, I received the message for rundll. What should I do?
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?
Step 1: If you have ArcadeWeb program installed on the computer, and then reinstall that program and check.
Step 2: Alternatively, you can try to perform the clean boot on the computer to resolve this problem.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.
Tags: Windows
Similar Questions
-
At 18:00 every day, I receive an error message that says: RUNDLL error loading C\:Program Files\Common Files\ParetoLogic\UUS2\UUS.dll the specific module could not be found. I use Windows XP. What is this and how can I solve this problem? It does not seem to affect what anyone, I don't know, but I know it shouldn't be the case and would like to fix.
I think they already know about this issue (and how to fix it) to ParetoLogic:
http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/
-
This message appears when opening programs, i.e. access to the internet or my bank details.
Hello
It is a known issue and ParetoLogic has created a special support page that shows you how to remove this error message, step by step:
Please follow the instructions in, and the UUS.dll error message should no longer appear.
Thank you
Kai
ParetoLogic
-
Whenever I click on a photo to open the above error apears.
Hi AntonioJMonteiro,
(1) if it works well before?
(2) remember to make changes?
Method 1: You can follow the steps described in the article below, which deals with a similar question
Windows Live Photo Gallery crashes or won't start
http://support.Microsoft.com/kb/944221
Important: method 1 contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in WindowsYou can also post your query on the Windows Live Forum., for more expert on this issue, help
Windows Live Forum - http://windowslivehelp.com/
-
How to fix this particular rundll error?
You can determine exactly what causes most of the errors by following the steps below:
Method 1: Put the computer in safe mode and see if the problem persists:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 2: Clean boot
If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:
http://support.Microsoft.com/kb/929135
I hope this helps!
Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Registry cleaner
I have a message that is displayed on my laptop whenever I turn it on it is C:\Program Files (x 86) Arcadeweb\arcadeweb32.dll the last time I had one of these errors, I did nothing about it and lost my computer. If you don't want do us to use a registry cleaner then how I get this error fixed? I could use all the help I can get. Please, I beg you. Thank you.
Hello
Registry cleaners and system optimizers who attest her can solve many questions are simply too hype
powder of snake oil. More likely to damage the system to fix anything.Good luck which is malware then please do a thorough check. Following message will show how to remove as
a startup message.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
RUN - type in the box-
sfc/scannow
Then run checkdisk (chkdsk).
RUN - type in the box-
Chkdsk /f /r
-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original title: __lost my microsoft photo program when I tried to download the upgrade to essentials
I tried to download the new update essentials download and three quarters of the way through, he stopped.
The download was already about this. He said then; "put everything back as it was" when he did. I have
lost my photo program. It now gives you a nag screen which keeps comeing like:Error loading C\program can windows live \photo gallery\WLXphoto Gallery\
WLXPhotoViewer.dll
The system cannot find message for message number 0 X %1 in the message file0 x %2
In addition, whenever I boot, the screen shows: "ready to download microsoft essentials" restoration is not
the ride.After starting, the system leaves me alone until I try to open a j - peg or some file im trying to open.
then the cycle starts again. further investigation, saying that I lost a dll.I tried to find microsoft photo viewer download to try to repair the photo of microsoft program and concluded that the
only way I can do that is by downloading the essential upgrade download because it is attached to it.
In order to accept the upgrade, the photo program should probably be repaired, as a thought as microsoft solve this Center says there is no problem. all other articles on the net is also not related or doesnot show how to fix the missing dll if it is the problem.Hello captain_crunch0,
In addition to the steps proposed by Ajay, you could try and download and reinstall all Windows Live Photo Gallery 2011.
This link should be just for the photo gallery. http://explore.live.com/Windows-Live-Photo-Gallery?OS=otherPlease reply back and let us know if this can help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?
Hello
I suggest you to please follow the steps described in the following articles and check if it helps.
"Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips
http://support.Microsoft.com/kb/812467
How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
http://support.Microsoft.com/kb/973457
Let us know if it helps!
-
Hello
I get this every time that I reboot my system (XPS One 27) since I upgraded to Windows 8.1.
Error in C:\Program Files (x86)\Intel\Bluetooth\btmshellex.dll
Entry missing: Tra &
Does anyone know how to fix this?
Any help will be appreciated!
Kind regards
Alan
Hi Alan,
You have any startup item that uses the Bluetooth feature (in my case I had Skype using my Bluetooth adapter)? If so, please try to disable such a request and check if you still receive this error message. If the error is still visible, please uninstall and reinstall the drivers for Bluetooth. You can find this video useful for updating drivers (this video is also good for Windows 8.1):
Downloading and installing drivers in the correct order
Do not respond to the results.
-
Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».
Now, after a few days looking for a response, I decided to ask the guy who made the game.
The error message also appears when I download just 2 service packs of Microsoft also.
I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bitOriginal title: fsx gold edition...
Try this, it worked for me:
(1) uninstall normally from the control panel.
Reinstall 2) in the Windows directory (C: here)
(3) install SP1, SP2
-
Error message: "error loading C:\Users\name\CNMSSC~1.DLL".
when I start my computer, I get this error message:
Error loading C:\Users\name\CNMSSC~1.DLL
C:\ Users | name | CNMSSA ~ 1.DLL
is not a valid Win 32 application
Can someone tell me how to get rid of this error?
This module seems to be related to the Canon printing software. Try to uninstall the printer and reinsert.
If you don't have a Canon printer, use Msconfig to check startup programs and disable all entries in this program, you will find. If you do not do so with Msconfig, download and run Autorunshttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx . You can get this program here and disable it.
-
Title: Mechwarrior 4 habit fully install on windows 7 says error
Hi I have mechwarrior 4 mercenaries. Recently, I got a new computer and had to re install the game. I experience this problem when the game is downloaded from 79 percent. He said: error on C:\ Program files (x 86) \ Microsoft Games\ Mechwarrior Mercenaries\ Resou...\newavol.mw4.
Thank you for your time and helpHello
-How you try to install the game on your computer?-What version of Windows 7 is installed on your computer?-You are aware of any changes made on the computer before this problem?I see that the Microsoft Mechwarrior 4: mercenaries is not compatible with the 64-bit version, but it is compatible with the 32-bit version.For 64-bit:For 32-Bit:Method 1: If you try to install the game on CD, I recommend that you check out the link below and check if it helps.Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.Method 2: I also suggest you try to install the game in Windows XP or Windows 7 32-bit compatibility mode and check if that helps.Make older programs in this version of WindowsMethod 3: I suggest you to download and install the hotfix that is available in the link mentioned below and check if you are able to play the game or not.
http://www.Microsoft.com/games/mw4mercs/downloads.aspx
http://www.Microsoft.com/games/mw4mercs/requirements.aspx
Method 4: For help I suggest you to check with the game help. Click on the link below.
http://www.Microsoft.com/games/mw4mercs/
http://support.Microsoft.com/GP/mechwarrior4mercfaqGames for WindowsHope this information helps. -
service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".
I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.
Hi Carl_Focus_Phone,
· Is confined with Update Service Pack 3?
· Did you do changes on the computer before the show?
You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.
How to troubleshoot an installation fails on Windows XP Service Pack 3
http://support.Microsoft.com/kb/950718
You can also see the following articles for more information:
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717
Learn how to install Windows XP Service Pack 3 (SP3)
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
Let us know if that helps.
-
error in indicating it to c:\program files\common files\paretologic\uus2\uus-dill of loading windows xp
Hi pone,
You can remove it by following these steps:1. Select start > run > type msconfig > press enter2. go the the start tab3. find the entry that has a command similar to c:\program files\common files\paretologic\uus2\uus and dill4. uncheck the box > click apply > OKSee you soon ~ -
Can you help me? I can't open my Jpeg images in Windows Live Photo gallery. I get this error message;
C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?
I use Vista Home premium 32-bit.Cheers, Rob.Hi robgrimes
As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20
I hope this helps.
Maybe you are looking for
-
Mac stops when left to idle for a few seconds
Basically, the title says it all. Whenever I leave the mac without any kind of interaction, he will either urge me to "Put my Mac to sleep" / "Shut Down", or he will die just on its own. I checked other messages and son of on and off site, but I can'
-
iCloud newbie. You want advice
Hello Apple and Iphone are new to me. I'm scared, I lost all my photos. I was running from storage space to decided to turn on iCloud for the first time. He asked me if I wanted to sync my photos, I said yes. I'm now thinking this wasn't a good idea
-
How to remove options open all in tabs from the bookmarks menu
Hello I have Firefox 17.0.1. Is it possible to remove or disable the all open at the point of tabs in the bookmarks menu submenus? I chose during it by mistake, and a lot of unwanted tabs appear as enraged politicians. Thank you. Jack
-
the size of the recovery partition
Anyone know the size of the recovery on an IBM R40e laptop partition?
-
I'm editing images in Adobe Premiere Pro (CC 2015.4 using Windows 10) and all of a sudden, it seems that all the audio and video came not related... I work with images that have a ton of cuts, I have never had this problem before and I have no idea h