Error loading C:\Users\Richard\AppData\Local\Temp\cerdr.dll. The specified module could not be found

Similar Questions

• RUNDLL error loading C:\Users\Gail\AppData\Local\Temp\fontftp.dll the specified module could not be found

  This message appeared on start up after I installed my new printer. How can I get rid of him? Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This is the probably the result of malware then do a very thorough check and when the
  the system is clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Get error in Vista, error loading c:\Users\Marie\AppData\Local\usbcrtRpl\sysWebman.dl lthis specified module could not be found

  Recently received a message from RunDLL when I start.

  Error loading c:\Users\Marie\AppData\Local\usbcrtRpl\sysWebman.dl lthis specified module could not be found.

  Ive already scanned for malware using Malwarebytes found nothing.

  What should do? Help, please. Thank you in advance.

  * original title - how to get rid of the error message at startup upwards *.

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error message: there was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  This message appears when I start my computer.  I think my pc has viruses/malware.  My antivirus firewall program wouldn't start / missing.  I gave my pc days back and managed to restart the firewall.  But I get the message... There was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  To clean malware, take a look here and try what is below if you still have the problem.
  http://www.selectrealsecurity.com/malware-removal-Guide/

  Try this program because it will show you everything that tries to run at startup.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Error loading C\Users\Owner\App Data\Local\Temp certqueue.dll the specified module could not be found

  I had problems with unwanted stuff appearing in internet explore and reset windows to get rid of it. Now, I get this error message when I start my computer. Please help me solve this problem. I am running Vista Home Premium. Thank you very much

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DLL from there was a problem starting C:\Users\Carol\AppData\Roaming\wupdate\pnpsql.soft the specified module could not be found

  This message keeps popping up how much - what I do?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the above mentioned error message. I would like to know information about this problem to help you better.

  (1) where do you get this error message?

  (2) that you get this error message while opening any application?

  In the meantime, please follow the following suggestions to solve the problem.

  First of all, start the computer in safe mode and see if the problem occurs in safe mode.

  Step 1: See the link to start in safe mode.

  Startup options (including safe mode).

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .

  In addition, open the link and follow the instructions to get the event logs, so that we can see which application is defective.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• How can I fix this error?-"Error loading C:\Users\Owner\AppData\Local\ufohudusiboqudo.dll" the specified module could not be found

  How can I fix this error?-"Error loading C:\Users\Owner\AppData\Local\ufohudusiboqudo.dll" the specified module could not be found

  Hello

  Google has no informatrion on this (ufohudusiboqudo.dll), so it's probably the Malware that your Antivirus has deleted, but who left a start for her entry.

  Download, install, update and scan with the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  If the error persists after scanning, use this FREE program to delete startup entries:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I get an error, "C:\users\gary\appdata\local\apple\adobe\wrtmnpl.dll the specified module could not be found" on startup.

  It appears to start on the last page of office?
  How to fix or get rid of this coming on all future start-up?

  Original title: run dll X error loading C:\users\gary\appdata\local\apple\adobe\wrtmnpl.dll the specified module could not be found.

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  You get an error at startup.  It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error code?

  (2) did you do changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Step 1-

  You should check if the problem occurs in Mode without failure.

  See the article-

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Make sure you connect in Normal Mode after all the troubleshooting steps.

  Proceed to step 2, if the problem does not occur in Mode without failure.

  Step 2-

  I recommend you to perform a clean boot.

  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.

  Check if the problem persists.

  Method 2-

  I would have you scan a System File Checker to verify violations of integrity.

  See the article-

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  We know if you need help. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  This could be caused by malicious software. Your antivirus may have removed part of it or prevent it install completely.

  Run a full scan with your antivirus, download and run Malwarebytes Anti-Malware freehttp://malwarebytes.org/

  To prevent the display of a message run Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx . You can look up the references to the file and disable the entries.

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• MSG for error in Windows 7: "unable to load DLL 'Gpib - 32.dll': the specified module could not be found."

  Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project

  use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
  Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.

  I get an error when debugging to

  Public void RegisterGPIBGlobals()

  in the Vbib - 32.vb, the error msg says:

  Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)

  It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on

  C:\Windows\System32, the msg of error becomes:

  An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)

  So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?

  2 Will the application I am writing with .NET work in x 64 Windows 7?

  The Almighty gurus and Mods please help. Thank you!

  Hi Joel, thanks for the answer! I have the 3.0.2 driver.

  I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:

  «To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»

  So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.

• How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  Hello

  Here is some information on this problem.

  The information contained in the link suggest you delete a scheduled entry, if it exists:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

  You can also use this program (FREE Autoruns) to find:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

  Original title: sbdbrbs

  When my computer starts up it gives the following error message: error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

  Can anyone offer any assistance?  Could not find this particular dll through search engines file.

  Thank you

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Error at startup: error loading c: | windows | izameweb.dll the specified module could not be found

  RUNDLL error

  The following message started appearing when starting my pc, please can help you, I tried the fix of this site without success.

  Error loading c: | windows | izameweb.dll the specified module could not be found

  Kind regards

  Anne-Marie

  Its probably part of some malicious software. Download ccleaner, run it and then go to tools / startup. Remove the entry. Then scan your system with a virus scanner

• Error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

  When I boot, the following message is displayed: error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

  Anyone know what it is? I have not noticed a difference in the way the computer runs

  Looks like it is or was part of the malware. Download ccleaner install then run it. Go to tools / startup highlighted / delete