ERROR LOADING c:\WINDOWS\MFN3D12. DLL IN THE SPECIFIED MODULE COULD NOT BE FOUND - WHAT IT IS AND HOW TO FIX

Similar Questions

• Whenever I start my computer, a message appears: "error loading C:\WINDOWS\ufidehipen.dll. The specified module could not be found. Can't fix it!

  Whenever I start my computer, a message appears:

  "Error loading C;\WINDOWS\ufidehipen.dll the specified module is not found."

  Once the message is erased my computer works normally.  Ironically received a hoax call, claiming they were from Microsoft Support.  I did not claim.  Have security of Norton 360.  A run 'getcleaner' and ' getmalwarebytes.  A ran all the Microsoft diagnostic tools and still have the same problem.
  If anyone can help with a solution to my computer problem?

  Hi Caspwilson,

  Not answering all calls for support!

  Download CCleaner from www.piriform.com/ccleaner and scan your system.

  I hope this helps.

• In Vista, get a DLL error on reboot, 'error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll. The specified module could not be found.

  On reboot, I get a RunDLL message "error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll.  The specified module could not be found.  How can I fix?

  Hi MelP1802,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the mention of steps in the Microsoft article and lets us know if the question get it fixed.

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Method 3: Also I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information helps.

• Cannot install Intellimouse on XP, I got an error message: error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  Original title: cannot install Intellimouse on XP

  Hello

  I have mouse Intellimouse optical 1.1, I want to customize sound buttons.

  Recently, I tried to install its driver on laptop T410, installed with XP 32 bit operating system. Unfortunately, I got an error message:

  Error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  What is the problem?

  Thank you

  Uriel

  Hello

  Please try this and report results:

  1. Click Start, point to settingsand then click Control Panel.
  2. Double-click System, click the hardware tab and then click Device Manager.
  3. Double-click mice and other pointing devices branch to expand it.
  4. Right-click the IntelliMouse pointing device, and then click Properties.

     The IntelliMouse pointing device should be listed as follows:

     Microsoft USB IntelliMouse explore (IntelliPoint)
  5. Click to update the driver.
  6. Click Next in the Wizard update device driver dialog box.
  7. Click display a list of drivers that are known... , and then click Next.
  8. Select the Microsoft mouse driver that ends with (IntelliPoint), and then click Next.
  9. Click Next to confirm that you have selected the right driver.
  10. Click Finish to complete the installation of the new driver

• On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll. The specified module could not be found. »

  I am running Win 7 Pro.  On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll.  The specified module could not be found. »

  The error msg box provides an OK button. After clicking this button, everything seems to work well.

  FYI, I use AVG Virus Protection program. I did a system restore to a date before when I think that this problem started. No luck there.

  I suspect some malicious programs hiding somewhere and part of it may have been removed by AVG, but not all.  Anyone know what program calls for this file? How can I get rid of this problem?   Any suggestions would be welcome.

  Thank you.  f* address email is removed from the privacy *

  Disabled under msconfig.exe startup items are moved to this location in the registry:

  HKEY_LOCAL_MACHINE Tools\MSConfig
  To permanently delete, you can delete the key relevant to this place. Method of the prudent man will like so:
  1. Burn a CD of Windows repair. Everyone who makes his own PC must have a maintenance.
  2. Create a System Restore Point.
  3. Start the computer with the CD in repair and check if the above Restore Point is visible.
  4. Start normally.
  5. Remove the offending registry key.

  Please mark my answer as 'Response' in this thread so that it can be closed.

• Error loading C:\Users\Richard\AppData\Local\Temp\cerdr.dll. The specified module could not be found

  The PC boot-to top every morning, I get this message. Can I please ask for some advice on how I can solve this problem, thank you.

  Hello LewBut,

  I'd say go throught he link below and try the suggestions of the SpiritX MS MVP.  How long have you encountered this message when you start your computer?

  Error loading C:\...".dll" the specified module is not found.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-loading-CDLL-the-specified-module-could-not/c21f0647-98EA-4170-9fca-90b5fcc5273a

  In addition,

  DLL of enforcement, error loading

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/run-dll-error-loading/02dbc0c6-fed0-4B7E-97ab-1245e9f43939

  Thank you

  James

• Under XP, after downloading and installing a new program, receiving the error message "unable to load DLL C:\WINDOWS\USER32 library. DLL in the specified module could not be found.

  I received the above error message title after the download and installation of a new program. Anyone know how I can find this add-on or fix this problem?

  Hello

  · Do you have what program installed?

  · You receive an error with the error code?

  · What is the number and the model of the computer?

  · What service pack is installed?

  You can check out the link below and try the steps listed: how to fix common errors of the User32.dll file: http://support.microsoft.com/kb/142676

• ERROR LOADING NVCPL. DLL IN THE SPECIFIED MODULE COULD NOT BE FOUND

  THIS MESSAGE STARTED APPEARING ON MY SCREEN UPDATED MSN MY PC. WHEN THEY DID THE TWO THINGS HAPPENED ONE MY CLOCK ON MY PC WAS THREE HOURS LATE AND THIS MESSAGE STARTED APPEARING ON MY SCREEN. ONCE I TAKE ALL OF THE MESSAGES THAT THEY DO NOT COME BACK UNTIL HE DID Y HAS NO ACTIVITY ON THE C. P PLEASE NOT THESE MESSAGES HAVE NO IMPACT ON THE PERFORMANCE OF MY C. P

  Hello

  (1) which update caused the problem?
  (2) so that you get this error message?

  The file c:\windows\system32\nvcpl.dll belongs to nvidia driver installed on the computer. If you have any nvidia on the computer application, try to reinstall.

  Method 1: To help troubleshoot the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Set the clock
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-the-clock

  Please post back with the results and let us know.

• There was a problem starting C:\\Program Files (x 86) \Conduit\CT3287808\Plugins\TBVerifier.dll that the specified module could not be found.

  Message comes up never start up and disappears if clicked.
  How can I eliminate this pesk?
  E-mail address is removed from the privacy *.

  Message comes up never start up and disappears if clicked.
  How can I eliminate this pesk?
  E-mail address is removed from the privacy *.

  (1) try to connect using free addon IE...
  Press the Windows key and the R key and type iexplore.exe - extoff and click ok...
  This is due to the led called plugin to remove it
  http://malwaretips.com/blogs/remove-conduit-search-virus/

• "Run.dll error loading C:\Progra~1\COMMON~1\INSTAL!1\PROFES~1\runTime\0701\Intel32\Ctor.dll. The specified module could not be found. »

  Affects a uninstalling some programs and appears in other programs that seem to run a while. Any ideas?

  I would go to this folder here:

  C:\Program Files\ Files\Fichiers

  Search for "Install Shield" and delete.

  Then, restart your computer. See if it still happens.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

  Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

  RUNDLL

  Error loading c:windows\mcycol40.dll

  the specified module could not be found.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• RUNDLL error loading c:\windows\icstlt2.dll the specified module could not be found

  This happens every time I start my computer. I can't do anything with the computer until I click the OK box. Then everything is generally well, but sometimes the computer just hangs. What is this and how do I get rid of him?

  It's just a dll name random belonging to some malware that had removed your antivirus programs or security.

  The error is because the point of loading in the registry is still present and it is trying to load the module that no longer exist where the "load error".

  You can uncheck the corresponding item in msconfig > startup, or if you scan from HijackThis, you can run it and difficulty of the relevant start pointing to icstlt2.dllentry.

  Similar to the example of an entry from Hijackthis below.
  "Rundll error loading c:\windows\ksexyn.dll. The specified module could not be found.

  Fixing the entry in HijackThis stopped at the error.
  O4 - HKCU\... \Run: [Pzemowukatiy] rundll32.exe "C:\WINDOWS\ksexyn.dll",Startup"
  http://free.antivirus.com/HijackThis/

  Let us know if you need more assistance.

• Startup DLL error - error loading C:\Windows\onedidak.dll the specified module could not be found.

  Whenever I start my windows xp, I always got the error

  RUNDLL

  Error loading C:\Windows\onedidak.dll

  The specified module could not be found.

  I google, would be Bing and yahoo looked everywhere for the use of the onedidak.dll and could not find answers.

  Help, please!

  I'd take a peek at this recent activity in this other thread where there is a happy ending, and it makes sense (only the name of the DLL is different).
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/get-error-message-regarding-ccncolmsdll-file/5770d2f6-805e-E011-8dfc-68b599b31bf5

• 8.0.0.561 - The specified Module could not be found.

  I have a Toshiba laptop with Windows 7 Home.  For the last nine months, whenever I have start or open after a "sleep mode", I get a message that I would like to know what it is and a way to correct and eliminate the problem.    The message is this:

  C:\Users\NANCYG~1\\AppData\Local\PLATO~1\Updater.dll

  The specified Module could not be found.

  A way to solve this problem?  Thanks in advance to anyone who can help me solve this problem...

  Nancy G

  Hi Nancy,.

  Sorry to hear that the error message reappears. If the message is back once again, you can see nets which dealt with the same issue and might help you solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/updaterdll/3120f6de-5bfa-4422-AA7D-e4177ea9b964

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/problem-with-updaterdll/89805aa9-9c14-4ab6-A1C1-abe6b9cd56df

  Hope it would help. Let us know the result and we will be happy to help you.

  Kind regards

• MSG for error in Windows 7: "unable to load DLL 'Gpib - 32.dll': the specified module could not be found."

  Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project

  use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
  Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.

  I get an error when debugging to

  Public void RegisterGPIBGlobals()

  in the Vbib - 32.vb, the error msg says:

  Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)

  It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on

  C:\Windows\System32, the msg of error becomes:

  An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)

  So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?

  2 Will the application I am writing with .NET work in x 64 Windows 7?

  The Almighty gurus and Mods please help. Thank you!

  Hi Joel, thanks for the answer! I have the 3.0.2 driver.

  I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:

  «To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»

  So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.