Error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

When I boot, the following message is displayed: error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

Anyone know what it is? I have not noticed a difference in the way the computer runs

Looks like it is or was part of the malware. Download ccleaner install then run it. Go to tools / startup highlighted / delete

Tags: Windows

Similar Questions

  • As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

    Original title: Rundll error help

    As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • Error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

    Original title: sbdbrbs

    When my computer starts up it gives the following error message: error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

    Can anyone offer any assistance?  Could not find this particular dll through search engines file.

    Thank you

    Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

    When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

    First of all, download, install, update and run full scans with two of these free analytical tools:

    MalwareBytes AntiMalware
    SUPERAntiSpyware

    Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

    If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

    Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

  • Error at startup: error loading c: | windows | izameweb.dll the specified module could not be found

    RUNDLL error

    The following message started appearing when starting my pc, please can help you, I tried the fix of this site without success.

    Error loading c: | windows | izameweb.dll the specified module could not be found

    Kind regards

    Anne-Marie

    Its probably part of some malicious software. Download ccleaner, run it and then go to tools / startup. Remove the entry. Then scan your system with a virus scanner

  • Error loading C:\WINDOWS\ubadamujumuqobo.dll the specified module could not be found

    loading C:\WINDOWS\ubadamujumuqobo.dll the specified module could not be found

    Oh yes, I recommend you either download autoruns and look for the entry of the virus in the long list of items or you run regedit and press contrl + f to search for the string ubadamujumuqobo and delete it. But it can be more risky for you, because you might remove something important. If you find in autoruns, right-click on it and click on see the entry in regedit. Then remove the entry from there. If you can not find in autoruns, make sure you have the skin of microsoft entries in the filter.

    Autoruns

    Regedit:

    Click Start > run > regedit
    OR
    Press the Windows key + r > regedit

    -Alex

  • What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

    Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

    RUNDLL

    Error loading c:windows\mcycol40.dll

    the specified module could not be found.

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • RUNDLL error loading c:\windows\icstlt2.dll the specified module could not be found

    This happens every time I start my computer. I can't do anything with the computer until I click the OK box. Then everything is generally well, but sometimes the computer just hangs. What is this and how do I get rid of him?

    It's just a dll name random belonging to some malware that had removed your antivirus programs or security.

    The error is because the point of loading in the registry is still present and it is trying to load the module that no longer exist where the "load error".

    You can uncheck the corresponding item in msconfig > startup, or if you scan from HijackThis, you can run it and difficulty of the relevant start pointing to icstlt2.dllentry.

    Similar to the example of an entry from Hijackthis below.
    "Rundll error loading c:\windows\ksexyn.dll. The specified module could not be found.

    Fixing the entry in HijackThis stopped at the error.
    O4 - HKCU\... \Run: [Pzemowukatiy] rundll32.exe "C:\WINDOWS\ksexyn.dll",Startup"
    http://free.antivirus.com/HijackThis/

    Let us know if you need more assistance.

  • Startup DLL error - error loading C:\Windows\onedidak.dll the specified module could not be found.

    Whenever I start my windows xp, I always got the error

    RUNDLL

    Error loading C:\Windows\onedidak.dll

    The specified module could not be found.

    I google, would be Bing and yahoo looked everywhere for the use of the onedidak.dll and could not find answers.

    Help, please!

    I'd take a peek at this recent activity in this other thread where there is a happy ending, and it makes sense (only the name of the DLL is different).
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/get-error-message-regarding-ccncolmsdll-file/5770d2f6-805e-E011-8dfc-68b599b31bf5

  • Error loading C:\windows\otomajapimogud.dll the specified module could not be found

    Each time, I get this error at startup. What this mean and how can I solve this problem?

    I would be grateful for any help. Windows XP Pro

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:

    No matter what you use for malware protection, follow these steps:

    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

    They can be uninstalled later if you wish.

    In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

    Restart your computer and solve the outstanding issues.
  • What does error loading c:\WINDOWS\dxdmvin.dll the specified module could not be found

    Whenever I turn on my computer I get this error code

    Hello

    ·          When the issue started?

    ·          What version of the operating system is installed on the computer?

    C:\windows\system32\dxdiagn.dll problems result in one way or another by a problem with Microsoft DirectX.

    Method 1:

    If you use Windows 7, and then run the DirectX Diagnostic tool.

    Refer to: http://windows.microsoft.com/en-US/windows7/Diagnosing-basic-problems-with-DirectX

    http://Windows.Microsoft.com/en-us/Windows7/DirectX-frequently-asked-questions

  • Error loading c:\windows\wmap3n.dll the specified module could not be found

    on my laptop windows xp service pack 3 to load, I get the above error message and want to fix

    Hi AlanAustin_968,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. do you have security software installed on the computer?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - the specific module could not be found

    When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

    When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

    A Google search for this returned no success other than your own message.  This suggests that the file refers to malicious software.

    You have a recent version of an antivirus with a current subscription application?  Have never leave you the subscription expires?

    Startup like these messages can occur if your antimalware application has deleted the payload real malware but has failed to clean up the start of the call.

    First download, install, update and run the following applications of malware free 2 the possibility that one or the other will detect and remove these remains (as well as anything else that your original scan could not detect):

    Malwarebytes

    SUPERAntiSpyware

    If these two applications running is not the message disappears, you will need to know where the call to the missing dll file is now done.  The best tool for this is AutoRuns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx the main problem with the help of AutoRuns is that he finds the startup items as much as it can be a little overwhelming. One of the good features of AutoRuns is that you can prevent an element of commissioning by unchecking the box, but if you decide that you really want to start, just re-check the box.  Once you are sure that you will never need of the item to start, remove it.

    Typical advice is to check the logon tab, but because the now-absent file is a dll, it is not likely to appear online in the logon tab.  Yet, take a look at the connection tab and if aluzonah.dll is there, or if there is a line of starting an application of suspect search, a Google search suggests is malware, uncheck the box and restart.  If the entry is far, re - run AutoRuns and remove the line.

    The next place to look is the Winlogon tab, which should have little, or no, entries.

    If you have not yet found the wrong entry, click the all tab, click the top row and then click on file > find and search for aluzonah.dll.  If you find an instance, uncheck the box and then manually move the selection on the following bottom line then press F3 to "search again".

  • Error loading c:\programdata\microsoftservicetray.dll the specified module could not be found

    I'm as Vista Home Premium on an HP of Notebook.The above error message is displayed at startup. I recently had an unexpected stop down and the computer restarts until it done a system restore. Since then, I get the error. Otherwise, I can't say that there is a problem and the system seems to work very well. Anyone know what this system tray or it does and if it is important? Is there somewhere I can go and download any module it is? Is it a thing of Windows or another program of MS? I tried a couple of the miracle solution and that they will not detect.

    Hello

    ·         You did changes to the computer before the show?

    Method 1: Try to boot in safe mode and check if you get the same error at startup. Check out the following link to start the computer in safe mode.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

    http://support.Microsoft.com/kb/929135

    Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

    Method 2: I suggest that you can exercise SFC scan and check if it helps. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. For more information how to make SFC / scan, please follow this link:

    http://support.Microsoft.com/kb/929833

    Method 3: I also suggest you to run a full scan of the system on the computer by using the Microsoft Safety Scanner and check if the computer is infected with the virus.

    You can download and run the Microsoft Safety Scanner from the following link.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • Error on startup: "Error loading C;\windows\apakahubozerahe.dll the specified module is not found."

    Whenever I start my PC, you receive this error message; "Error loading C;\windows\apakahubozerahe.dll the specified module is not found.   How can I get rid of this? I can't find the file in c: Windows to remove and my registry cleaner does not clean it?

    He does not seem to cause any trouble and disappears when OK is hit.

    Hi Kevin!
    Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
    1. after the download is complete, select autoruns & right click on it
    2. click on "extract here".
    3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
    4. what which is complete, Open or run "autoruns".
    5. in the opened window, click 'all'.
    6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
    7 right-click & click delete & ok

    He helped?

  • Start Windows XP problem, error: C:Windows\ecsdlp.dll the specified module could not be found.

    original title:. Error loading windows

    Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

    Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

    Your computer was (and still may be) infected with the malware.  Error messages such as those that you have the result when your anti-malware application deletes the active part of the malicious program but fails to remove the entry from the Windows registry used to start the malicious software.

    First of all, download, install, update and scan with these two free utilities:
    MalwareBytes Anti-Malware
    SUPERAntiSpyware

    If after the scans have completed and you have removed a malware that has been found, you get the error messages on a restart, download, install and run Autoruns.  Once the scan is complete Autoruns (bottom left), click the 'Connection' tab and find the names of two files in your error messages (ecsdlp.dll and udehukoziye.dll).  If found, uncheck the box at the left end of the line (you can delete the entry, but this action is not reversible).  If you can't find the name of the file in the connection tab, click the "all" tab, use file > search to find them.

    Once the entries with incorrect file names have been deleted or not, you will get errors at startup upward.

Maybe you are looking for

  • Satellite A300 - DVD player has stopped working

    Hello The DVD in my A300 drive has stopped working. I don't find the driver in the control panel. The drive does not appear in my computer... Does anyone have an indices which me 100km of a service centre! Michael

  • HP mediasmart photo

    My HP MediaSmart Photo software kept freezing and did not close without being forced. When I tried to download an updated version, what I got was a booboo scaled down version where I lost the ability to correct red eye or crop the photo. Any suggesti

  • Thin vertical lines on my screen.

    The Green verticle lines are on my sunblock. They went for a day now, they're back. Recently, I was working with Roxio to fix a burn disc problem which read like Wave video does not. The Tech had me disable my start menu applications, etc and I thoug

  • Flow 11: Losing WiFi connection keep local

    Several times now that I lost internet connection but I am able to keep the local connection. Yellow triangle on WiFi States report icon that I lost the internet connection part. I run network troubleshooting and it asserts its reset wireless but not

  • Can I delete my folder structure and put all my files in a main folder

    Hello I would like to remove a complicated production structure and pull it all in a single folder for now.  So instead of going to the folder documents/file/1 has / folder I etc... I just simply go to the documents. It would take too long to do it b