error message 151/151 (registry\machine\components)

Similar Questions

• error message 7528/7528 Registry\Machine\Components

  can someone help please, I got this error message, I have a problem with the starter, I had the 2bleeps not one alone.

  I tried the reset button but it doesn't work every time. I just run a deep scan Microsoft Safety Scanner, and it came clear.

  I have installed Norton and windows are uptodate.

  Thank you for your help, did what you said, but was still the odd days, it has not started.

  I did not use Disk Defragmenter, he ran for hours and don't let any report,

  So I was none the wiser.

  I also ran spybot O.K., he finds the cookies.

  At the end of the day, we opened the file and found memory was not fixed course

  Since April 15, I made a note each day which reads OK start

  I hope this is the end of the problem, and it may be useful to someone else.

• "0xc01a001d (\Registry\Machine\COMPONENTS\DerivedData...). Error while installing Vista SP1, WITH RESTORATION or BACKUP ACCESS FORBIDDEN! ANY CHANCE OF HEALING?

  I rebooted several times Vista since Vista SP1 download.  I tried to get my system prepared for a Boot (as several vital Programs are not yet supported) double Win7.  I keep getting stuck on the "0xc01a001d? / 99216 (\Registry\Machine\COMPONENTS\DerivedData... "error.

  I have saved on an external USB hard disk and do not have the original system disks.

  I downloaded the Vista recovery disk.  On all options, he said that I could not restore.  He could not read the USB key to find the backup point.  He would not even install when I tried to reinstall.

  Y at - it a help to me.  I am a student and can get another copy of Vista from MSDNAA but would go instead by the download time intensive task, to find drivers on the Dell Web site (I have an Inspiron 1501) and reloading everything.

  ALL BOARDS

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Vista.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• !! 0xc01a001d! 37423/101025 (\registry\machine\components\deriveddat..)

  Hello
  We receive the following error at startup of ideas?

  !! 0xc01a001d! 37423/101025 (\registry\machine\components\deriveddat..)

  Can not start in mode without fail & cant also roll at a time where there was no question, we rather would not have to take the PC of someone to look so any ides reasonable workaround would be accepted with gratitude

  Thank you
  Ben

  Hi Ben,

  Remember to make changes before this problem?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  
  Method 2: follow the steps mentioned in the article below, and then run the Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  How to use Startup Repair?

  
  Method 3: you can see the steps outlined in the article below, which deals with a similar question

  Your computer may freeze or restart to a black screen that has a "0xc0000034" error message after you install Service Pack 1 on Windows 7 or Windows 2008 R2

  http://support.Microsoft.com/kb/975484

  (Article applies to Windows 7, similar measures valid for Windows Vista)

• Laptop will not load after installation of SP1. "!! Oxc01a001d! 28497/89893 (\Registry\Machine\COMPONENTS\DerivedData...) "is displayed after the start!

  I have a Toshiba Satellite. Running Windows Vista Home premium 32 bit.
  It was working fine until I tried to intsal Service Pack 1 through Windows install after having been invited by windows that he criticized the update.

  Now windows won't start. I tried the Safe mode, but it stop at the "Loaded: \windows\system32\drivers\crcdisk.sys ' telling me to wait, but it does nothing.

  I tried to start another option but they all end in error. Oxc01a001d! 28497/89893 (Registry\Machine\COMPONENTS\DerivedData...) »

  Someone please HELP!

  I was able to fix the problem by reinstalling windows using the Installation DVD of Vista. He did a "fresh" Reinstall. To do this you first have to set the BIOS to boot from the CD drive instead of the hard drive.
   
  Instructions to do so can be found here: http://techpaul.wordpress.com/2007/08/03/how-to-boot-from-a-cd/

  Insert your Vista DVD and choose repair or install. My Vista files have been basically corrupt but not your strength. If they are not to select Repair will give you the opportunity to do a system restore.

  Don't forget to reinstall Vista to wipe your hard drive and you will lose your files. System Restore will not. But if you supported rose them to an external drive or online so no problem!

  I hope this helps!

• !! oxc019001d! 28527/90174 (Registry\Machine\Components\DerivedData...)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • The installation of SP1
  • !! oxc019001d! 28527/90174 (Registry\Machine\Components\DerivedData...)
  • Update
  • No difficulty yet

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• After update - black of Windows Vista at startup display 1142/1142 (Registry\Machine\COMPONENTS)

  I had an update before closing my office last night (that is, using Vista).  This morning when I turned on the computer, a black screen came with the appearance of the following text:

  1142/1142 (Registry\Machine\COMPONENTS)

  I couldn't do anything so, I turned off my computer.  Now, the power will not come.  If anyone has any suggestions (could power suddenly gone bad or the power suddenly button failed - just a coincidence, it happened at that moment?).

  A big thank you to all those who wish to enlighten me on this matter.

  Note: This Office was purchased in 2008 - Acer Aspire AM5620-E5523A (I'll never buy Acer again once!)

  Hello

  It seems to be a problem with the hardware. I suggest you to contact Acer support for assistance.

  Support from Acer: http://support.acer.com/us/en/default.aspx

  Hope the information is useful.

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Error message that your registry seetings were not copied correctly

  I have been using Highway 2007 since 2007 with no problems until yesterday, September 23, 2013 when I tried to use it I got the error message that your registry settings for this application were not copied correctly. Rerun the installation program

  I tried several times to put term up all without success.

  Finally, I uninstalled the program and reinstalled from the original disk but still have the same error message.

  Can someone please

  Hi Ron,

  Check out the following link. This could help you.

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590/en-us

  You can uninstall a program from the control panel:

  (a) press the Windows and X key to open a list of tasks from the lower left corner of the screen.

  (b) select Control Panel.

  (c) select programs and features.

  (d) double-click the program you want to uninstall, and then follow the instructions on the screen.

  If the problem persists. You can ask your question on the forum dedicated for Streets & trips for assistance on this issue.

  http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips

  I hope this helps.

• 82849 (\Registry\Machine\COMPONENTS\DerivedData...)

  It shows on my screen after trying to install the sp1 of vista as RECOMMENDED on the update of windows. What is it meant to be there? If Yes for how long was there age already. If this is not the case, what I do about it?
  Please can someone help as soon as possible

  don't worry it worked myself

  Hi zenareddog,

  Thank you for using answers Forum.
  This is accompanied by any other information?
  Can you post the exact error message in this forum?
  When the screen is not displayed (start, stop down, randomly, etc.)?
  It's SP1, SP2 not?

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 28427/91015 c \registry\machine\components\deriveddata to get this message on a black screen after trying to install service Pack 1

  children made me an ipod a few weeks and the computer finally recognized and worked ok since, had a similar problem yesterday and decided to check if I needed updates, which were in automatic mode and could not all download, eventaully had download tool ex windows successfully, checked again updated and sent the vista pack 1 , which began installing to above point.when I tried to set a restore point before you download, I was unable to find any.some months ago, I had a problem with administrator accounts, with some help please

  GER

  You're in the wrong Forum for your questions.

  It is the instance to install Vista OS.

  You need the Vista repair Forum, or Windows Update Forum (which I have already mentioned on):

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the information below does not it, repost nicely in Forum repair above or in the Windows Update Forum:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• error! 0xc01a001d! 27897/86083 (\Registry\Machine\Components\DerivedDate...) after installing sp1

  I tried repairing the system... no chance of that happening just for hours and a manual feed down should be done. I also tried to boot in safe mode... then from there tried to restore to an earlier point... no luck... I have a dell inspiron 1525 Vista Basic...

  Fixed a problem! I lost 2 days looking online and e-mail from microsoft... and im done... I did a factory image restore and, so far, everything seems to work... and I'll deal with what I've lost... but thanks for trying... :-)

  Jessica

• Home Premium 64 bit Ultimum 64-bit upgrade fails during execution. Error message: Windows cannot configure some components

  Upgrade problems. Home Premium 64-bit to 64-bit Ultimum.

  
  
  I tried several times to upgrade Vista Home Premium 64-bit Vista Ultimate 64-bit. It ends at until the end, but when it restarts, it says windows cannot configure some components and starts a restoration to Home Premium. So frustrating. Any help would be appreciated.

  Both Home Premium and Ultimate out of support in two months.  One company will receive technical support from Microsoft (security patches, etc.) after April.  Here is the political Support of Vista page.  'Not applicable' entries in the column of Extended Support mean that this edition is not eligible for updates, including critical security updates, after the end of standard support on April 10, 2012.

  http://support.Microsoft.com/lifecycle/search/?sort=PN&Alpha=Windows+Vista

  If you can, return your ultimate and buy business.  I realize that copies of business are becoming difficult to find.  Another option is to upgrade to Windows 7.  I suggest professional since Ultimate offer very little more than Pro (just the Bitlocker and multilingual support) and is also not intended for extended support after Windows 7 standard support ends after 2014.  Professional will extend support through 2019.

  Having said all this, I also had problems using the update with Vista installation option.  In many cases I resorted to the use of the custom installation option.  That does not work, but of course this means using Windows Easy Transfer to save your files and settings and reinstall your programs.  What I eventually learned with Vista upgrade can take all day even when all goes well, then there is not much time saved during a custom installation followed in any case of reinstalling the software.

  One thing you can try is to completely remove your anti-malware software.  Just turning it off is not enough because some antivirus programs install a watchdog on the part of the registry.  If something prevents the writing of registry entries at the end of the upgrade you so you would get a rollback.

• Windows Fax & Scan Error Message "the remote fax machine did not respond in time, and the call is completed."

  I recently started using Windows Fax Scan & on Windows 7.  The first days, I have not had any problems receiving faxes.  Now every fax I want to receive declares, "the remote fax machine did not respond in time, and ended the call."  How can I solve this problem?  It allows once 5 of 7 pages to receive.  Any help would be great.

  It worked for me
  (1) open my computer-> Control Panel-> modems Options and.
  (2) on the Modems tab, select your modem from the list, and then click Properties.
  (3) in the Advanced tab, click Change default Preferences.
  (4) the speed of the Port is by default 115200; change to 9600 and see how it
  going.

• Display only! 0xc01a001d! 28032/88682 (\Registry\Machine\Components\DerivedData...)

  I denied a download for Service Pack 1 for Vista, and that's what I got. My computer is turned off and I can't get to the Welcome to Windows screen to do anything - the topic is what I do, what I need to do?

  Use System Restore

  Windows Vista repair options:
  http://vistasupport.MVPs.org/windows_vista_repair_options.htm Carey Frisch