Error message 'an attempt to index upvalue' whenever I try to import puppets?

Similar Questions

• Publish the services in Lightroom: internal error? : 0:attempt to index field 'export setings' (value zero). On 10 64-bit windows. I uninstalled and reinstalled Lightroom (x 3), uninstalled and reinstalled the plugins etc, etc. Anyone with a real solution

  Hello

  I think I found the problem to which there is no solution. Lucky white Heather. This happens just as I'm building a site to which I'm now uploading - Smugmug.

  Publish the services in Lightroom: internal error? : 0:attempt to index field 'export setings' (value zero). On the 64-bit windows 10 platform: desktop. I uninstalled and reinstalled Lightroom (x 3), uninstalled and reinstalled the plugins etc, etc. Anyone with a real solution?

  Help

  Andrew

  Hi André,.

  See this similar thread: 'Services to publish' question in Lightroom

  Kind regards

  Claes

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• I get the message cannot load the configuration settings whenever I try to download Adobe Reader

  I get the message cannot load the configuration settings whenever I try to download Adobe Reader

  Try to download the adobe reader Offline Installer.

• ???  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "an error occurred when attempting to change modules.  It will not import pictures and has no side panels under the library.  What should I do?

  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "an error occurred when attempting to change modules.  It will not import pictures and has no side panels under the library.  What should I do?

  Error changing modules | Lightroom

• Lightroom CC 2015.3 keep craching whenever I try to import images

  Hi, could someone help me please. Lightroom CC 2015.3 crashes whenever I try to import images. Operating system iMac OSX EL Capitan 10.11.2 retina 4 k, 21.5 inches, end of 2015, 3.1 GHz processor intel core i5, memory 8 GB 1867 mhz ddr3 graphics card intel graphics pro 6200 1536 MB. Thanks for any help!

  Hi Antonio,.

  I suggest you first Lightroom update for the latest version of Lightroom 2015.4: keeping up-to-date for Lightroom

  Once that is done, then please go ahead and try to import images into Lightroom.

  Let me know if the app crashes yet or not.

  Kind regards

  Tanuj

• Cannot add Windows Vista PC to Windows 2008 domain. Error message: an attempt to resolve the DNS of a domain controller in the domain being joined has failed...

  When you try to add a new computer Windows Vista (hqseven) to a Windows 2008 network, I get the following error message... "An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Ensure that this client is set to reach a DNS server that can resolve DNS names in the target domain. "Last year, I added two XP, a Windows 7 and another Vista box to the field.  I don't know why I can't add my new Windows Vista computer.

  I am able to get on the internet with the Vista PC. I can RDP to the domain controller (hqserver64) or any client. (using the name of host or static IP)  I can also do a ping of the domain controller (DC) or any another computer on my network using the host name.

  After initial search for information, I found the following error message when you do a nslookup from my new vista box.

  Nslookup mydomainname

  Server: hqserver64.mydomainname.net

  Address: 192.168.0.99

  hqserver64.mydomainname.NET cannot find mydomainname: Server failed.

  I do not understand why I suddenly get these error messages when I was able to reach this area in the past.

  Hello Stan Smith,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows 7 in adomain of work environment and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When you try to evaluate the performance of the computer of my PC for the first time in 64-bit Windows 7, I get an error message stating "Windows Experience Index for your system could not be calculated."

  The error message also indicates: "cannot complete the assessment. The assessment or other operation did not complete successfully. This is due to an error reported from the operating system, driver or any other element. »

  I did a full install new (custom) on two WD Raptors (10,00 RPM) RAID 0 (striped).  All used harware succeeded in Vista Ultimate o/s is first available.  Current material as follows:

  Windows 7 Professional 64 bit Build 7600 v6.1.7600
  EVGA nVidia nForce 780i SLI card mother ATX
  Intel Core 2 Extreme QX9650 processor
  8 GB (4x2Go) Patriot Extreme Performance Viper Series DDR2 PC2-6400 low latency memory twin Kit, SLI-Ready (with CL Timings of 4-4-4-12 @ 2.1V)
  2 x WD 150 GB 10 K rpm 16 MB SATA NCQ in RAID 0 (striped)
  Samsung 22 x DVDRW SATA Lightscribe
  750TX (750 watts) Corsair power supply
  2 x OC from BFG GeForce 8800GTS 512 MB GDDR3 video cards in SLI
  Map its Creative SB X - Fi XtremeGamer

  All PC settings are standard (ie: no overclocking component) and all windows updates are completed.  Latest drivers installed for the video & sound cards.  Last firmware & driver for optical drive installed also.

  Any ideas as to why I can't receive a rating system for Windows Experience Index with success?  Thank you

  Stuart

  OK, I was on the phone with support for about an hour.  Problem has been resolved.  Turn user account control either the lower or penultimate level.  This version fixes the problem!

• using lightromm message gets attempt to index a nil value please help

  x

  Hi Jazzman,

  Please visit the following link: error LR "attempt to index a nil value"

  Kind regards

  Tanuj

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• my computer is locked up to display error message 0 x 80010108 that it locked after trying to import pictures on a memory stick

  my computer locked up after trying to import pictures on a memory stick list 0 x 80010108

  Hello

  ·        What operating system is installed on your computer?

  ·        What application are you using to import the photo?

  ·        You receive an error message with the error code?

  If you use Windows Live Movie maker, and then post your query to the following forum:

  http://windowslivehelp.com/product.aspx?ProductID=5

• Help, please! I get an error message that access is denied 0x80070005 when I try to run the backup facility.

  I use Windows Vista as administrator and use the automatic installation of Windows to save everyday on an external hard drive - this has been fine for months and nothing has changed, but now I get the error message and can save is no longer. I tried to disconnect the external hard drive and reinsert and the drive is recognized. Back up to start running for awhile and then fails. Can anyone help please?

  Hello

  Using third-party backup program or windows backup?

  Method 1
  Step 1: I would suggest that you start the computer in safe mode and then run the backup files.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If you are able to run backup ins fine safe mode, and then perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  Method 3
  Under your administrator account, get full rights and take possession of all the C:\ drive using the following procedures.
  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.

• Error message AIOC exe has stopped working when I try to scan on Dell AIO 924 printer

  I recently bought a Dell studio with Vista (old computer ran XP) desktop computer.  I installed my printer and have been able to do print, but not to digitize from all in one centre, get the above error message

  bredenbm,

  We will try to reinstall the printer using the instructions below. This will install the Dell all-in-one Center.

  First of all, make sure that your computer has all the updates of Windows. I've customized those too, especially the .net framework(required to run many applications). Also make sure you have the latest Java. Since you don't mention how the printer is connected, here the basic instructions for this printer.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. When the correction is over, it will prompt you to restart your computer. There seems to be a lenghty process so please be patient.

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers.

  All other drivers

  Install the appropriate drivers. (Install ONLY the drivers you need) You will be asked when connect you your printer (power on)

  In the digitization to the analysis, if you have the disc that came with the printer, and then insert the floppy disk to the printer and stop running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

• Any ideas? Premiere Pro CS6 crashing whenever I try to import clips!

  Hey everybody,

  I'm relatively new to Premiere Pro CS6 (gradually switching to Final Cut), so forgive me if there's any details miss me. I have real problems with getting the app to work, unfortunately.

  Here's the problem:

  I can create and save projects very well. Nothing is slow or appears bad. However, every time I want to import clips (in any parameter of project/sequence, or codec, as well as different types of clips from the camera), Premiere Pro instanty throws a message - immediately - to say:

  «I'm sorry, that a serious error has occurred which requires Adobe Premiere Pro stop.» We will try to save your current project".

  It is literally impossible around that, that I can tell. I tried all different types of clips, all the different import methods (for example drag / move, media browser, file > import), but nothing. It isn't even a matter of film - the same applies even if I just try to import images. Oddly, with grag and drop - method if it is a video clip, PP registers even how long the clip is, highlighting where the clip will insert - she normally would be - but then instantly crashes after abandonment and/or trying to read. This led to believe me (because I never saw a single visual image in Premiere Pro) there could be a graphic bug - potentially something wrong with my system.

  For any help or suggestion would be received with gratitude. I have attached to the report of crash below and some features of my system.

  See you soon,.

  Alastair

  MacBook Pro 15 "(Retina Display) - mid-2012"

  Intel Core i7 2.6GHz

  RAM 8 GB 1600 MHz DDR3

  OS X 10.8.2 (12 C 60)

  Intel HD 4000 512 MB graphics card

  Premiere Pro Version 6.0.2 (072 (MC: 264587))

  

  PS just Gunna do a full update of my Mac OS X to bring it up to 10.8.3. I doubt that this will fix the problem, but it's worth a shot, and if no bed I'll let you all know.

  Hey everyone just updated:

  I think I've solved the problem!

  No idea what it was, but it would either have been:

  (a) restart my MacBook (unlikely!)

  (b) update the firmware from Apple

  (c) update the Apple Retina Display update

  (d).. .the above all of that!

  He actually started to work before you go on 10.8.3, so not associated with OS X.

  In this case, my apologies for the long post - hope it helps everyone in the same situation in the future. Moral of the story: the Apple software update!

• Error message after attempting to upgrade Vista to Windows 7

  Have an older Gateway laptop. Decided to try to upgrade to Windows 7. Can not get anywhere now, goes to blue screen and keep this message:

  SMART failure provided on hard disk 2: WCD WD 3200BEVT-22ZCT0-(S1)

  Contact hardware manufacturer

  File: \Boot\BCD

  Status: 0xc00000e9

  Info: An unexpected i/o error has occurred

  94.29.00 BIOS version

  Thanks for your suggestions,

  Anna

  Hello

  Your hard drive is about to fail according to the mini-message.

  Read this information about it:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/smart-failure-predicted-on-hard-disk-2-WDC-WD/2921839c-9C9D-4d4b-9752-8287605df956

  ______________________________________

  And also before you try to upgrade an older machine to Windows 7 follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.