Error message appears after using the recovery CD

Similar Questions

• HP pavilion dv7: error message when you use the recovery disk

  1Meilleure opportunity disc ok, 2 used and 74% and error message copy file fails to d:\preload\base17. WIM c:\RM\IMAGE\base17. WIM. What should I do now.

  It just sitting there so I'm out of it and then when I turn on again it says that it finished so I click done and then I got error missing Boot Manager.  You even insert the other disc driver and application recovery cd.  What should I do now.

  Thank you

  Update: test complete HDD to 100% test passed, smart check successful smart hard drive

• XP unbootable after using the recovery disk, but Linux will be

  I have a laptop Toshiba Satellite L25-S1216. I had some bad virus, so I used the TOSHIBA Windows XP Recovery and Applications/drivers DVD provided with the computer when I bought it. I had used this once recovery DVDs or two before without problem, the last time was about 1 year ago. The recovery process seems to be okay: he seemed to format the disk and copy the files from the DVD to the hard drive. He copied about 5 600 MB hard disk for about 10 minutes and 40 seconds.

  But the computer does not boot from the hard drive after using the recovery DVD. I tried the process several times and it does not start in Windows XP on the hard drive. I checked the settings in the BIOs to make sure he can start, but it does not start in Windows XP on the hard drive. All I get is a white screen with a horizontal blinking cursor, nothing else, no error message, nothing.

  Then I got a copy of Linux (Fedora 14 live) on a CD and started on the computer from the CD R - W, DVD R drive. Then I loaded Fedora 14 hard disk. , I can boot into Linux (Fedora 14) of the fine to hard drive. In fact I use Linux to write this e-mail now. I also see the files that have been copied from the DVD recovery Windows XP on the hard drive, when I'm on Linux.

  Does someone has an idea what could be the problem? The only difference between now and the last time I used the recovery about DVDs a year, is that I had to replace it internal CD R - W, DVD R drive, as a mechanical part was broken. I replaced it with the same exact model (TS-L462) who was in the computer when I got it is new.

  Thank you

  B.

  Not sure how a restore xp cd may give you the option to start the recovery console.

  With a regular xp, recovery cd / repair console is launched all simply by selecting the 'r' on the configuration screen.  Subsequently, the recovery console opens and takes you to the drive prompt.

  In any case, what I suggest is to execute commands to drive at the command prompt that could make the drive bootable again.

  the commands are:

  Chkdsk /r

  Fixboot

  bootcfg /rebuild

  FIXMBR

  Normally, fixmbr running on a laptop is not recommended because it disables the hidden partition that contains the files for recovery.  Then re-enable it manually, is not easy. But since you have your on dvd, then you are lucky.

• My Aspire one 753 does not connect to WIFI after using the Recovery Manager.

  After using the recovery on my Aspire one 753 inbuild Manager my phone doesn't conect to wireless internet. I think the problem has something to do with the drivers, but I'm not sure. need help ASAP

  I used the live usb of ubuntu when I discovered that my network card was acutally one of Intel wifi card. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24217&lang=eng&ProdId=3316. Thank you very much for your support on the issue

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• Error message when you use the DVD player

  I have a Satellite P200D and whenever I put a disc any in the drive I get an error NON-DISQUE when I eject the disc. I always make sure I close all programs relating to the use of the disc before you try to take out the drive. It is a new problem that I used the laptop for a few months with no problems at all. The text of the error message is below. Pointers would be appreciated. I can live with that, but it would be nice not to have to.

  Exception Processing Message 0xc0000013 0x764C023C 0x8E4A1B6C 0x764C023C 0x764C023C settings

  OK, if you try to exit the disc using the eject button on the side of the laptop, why not try ejection through windows software.

  To do this right-click on the dvd drive in my computer, then click "eject". This could mean windows that its ok to let the player go now.

  Another solution would be to save all the important data to another drive, and then put the laptop "out of area State" by using the recovery disk. I would say that the problem will disappear.

  However, if problems persist, please consult your place of purchase for a check up.

  Good luck.

• Drive D is missing after using the recovery CD

  Hello
  This is my first time using the toshiba forum! My problem is that after that I used the recovery cd and rebooted my laptop, I can't find my D drive!
  I have a P100-277 100 GB HDD divided in drive C and D, now only 100 GB on my C drive.

  What can I do to get my D drive?

  Thank you very much

  Hello

  You have probably chosen standard recovery option. Standard recovery option erases the entire HARD disk and creates a partition. How to save the contents of the previous drive D is the right question.

  I've never done it before, but I'm sure you can find some tools on the net or PC magazine. Will you please Google around and I'm sure you'll find something.

• Does not start after using the recovery Toshiba Tecra M5 - disk

  After using the restore on my Tecra M5 CD, the computer cannot even start!

  What to do in this situation?

  Hi jbdoktor,

  Does that mean exactly?
  Now, what happens if you start the computer?

  Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

• Should I update all the files from the Toshiba site after using the recovery CD

  I just used my recovery CD and update the Windows Update System.

  The question is: should I update all files in the files on this site download section as well?

  Usually after using the Toshiba Recovery CD everything should works and works correctly
  To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
  But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
  Small is my opinion...

• Satellite L450 - X 13 not turn on after using the recovery disk

  Problem climbed down after turning off suddenly. Initially could not get windows OS to work while I used the recovery disc. After it has been successfully used all of the computer has been cut and will not start (dead whole machine) despite the battery power and common alternative in place.

  When you press power button / stop the led green lights for a second and then immediately turns off, no attempt to start engine.

  Someone at - he seen this before or has any ideas?

  Remove the battery, disconnect the power supply, leave the laptop for now and try to start with power current only.
  The same thing happens again?

• Equium A100-338 has started to go very slow after using the recovery CD

  I used the recovery CD after my Equium A100-338 has started to go very slow, it still seems slower than it used to be.
  I haven't added anything to the computer from the CD recovery and verified the Manager tasks to see if I could spot anything suspicious.

  Statistics say, use 18-22% CPU, but the physical memory is about 68% is this normal or should it be less?

  Is there a list of standard processes I can check against mine to see if its doing something, it shouldn't be?

  Thank you

  Hello

  I think you feel that unity is a bit slow due to the high amount of different processes that run in the context of the BONE.

  The fact is that your laptop supports various features such as buttons FN, Toshiba control buttons, etc.
  All this has needs drivers.

  In addition, as I m not wrong the Norton Internet Security has been installed on your system.
  It s part of the image of Toshiba and this tool could affect the performance of the system.

  I have used in the past, but now changed to another application that doesn t need a lot of material resources.

  So if you want you can disable or delete some of the tools and utilities that are not important to you and could clean the system using a 3rd third party tool called CCleaner

  Welcome them

• Error message appears after each start up toward the top of my computer.

  Error loading: C:\Users\Michelle\AppData\Roaming\mousel.dll
  The specified module could not be found

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• NTLDR is missing after using the recovery disc - Satellite A100-493

  Hello

  I come from Germany and I have a Toshiba Satellite Notebook, which I bought new in 2006.

  After nearly three years, he started showing problems and slow, so I backed up my files and inserted the "Product recovery" CD that came with the laptop. I followed the Instructions and it began to unwind. After that about 1%, it displays a short Error Message, which I was not able to write down again and stops.

  When I restart the computer says ist «NTLDR is missing, press Ctrl + Alt + Delete to restart» When I do that it shows me the same "NTLDR is missing" Message, no matter how many times I reboot the thing.

  I tried to redo the whole fotmatting, but it always comes out the same way. What di - I do?

  G Demolidor

  It's very strange. If the recovery disk is not damaged the only reason for interruption of the installation may be faulty HARD drive or some problem there.
  If possible, try to get Microsoft WXP CD facilities and try to install Windows XP Home edition.

  Please let us know if the installation completes without any problems.

• BlackBerry Smartphones-error message when you use the browser

  My Blackberry Storm began to display: error occurred during parsing XML: Expecting '; '.  When I go to the browser.  No idea how to eliminate this error message every time I use the browser?

  Error message went away by itself (a day after my post).  Thanks for the posts.

• I get an error message when I use the link in the email that my calendar is corrupt and live mail stops

  I get the following message appears when I use the e-mail link in my internet: windows live mail could not be started. closing mail. your calendar contains corrupt data that require the mail of closing phase. error: 0x8E5E0247

  Did you change on your computer before you get this error? In particular, has changed the configuration of your drive somehow?