Error message @ boot Win 7 Pro "it was Aproblematique from C:\programdata\ofpviaowu.dat - the specified module could not be found."

Similar Questions

• Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found.

  While from my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

  RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

  I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

  I tried then access these locked directories showing locked and have encountered the error

  C:\Users\ (X) 'X' is not accessible, access is denied.

  I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

  AND yet once I met the other mistake

  Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

  So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

  Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

  ........ Content of the lead in double...

  I already posted this Question under Security, issues of privacy and also accounts, but it seems that the error also happens with IE explore 11. The error comes back constantly, but more often in the browser.

  Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found. Well that begins my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

  RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

  I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

  I tried then access these locked directories showing locked and have encountered the error

  C:\Users\ (X) 'X' is not accessible, access is denied.

  I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

  AND yet once I met the other mistake

  Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

  So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

  Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

  Hi Barry,.

  Sorry for the late reply.

  The Internet Explorer cannot be uninstalled. However you can disable/enable what works as the resettlement.

  How to repair or reinstall Internet Explorer in Windows

  https://support.Microsoft.com/en-us/KB/318378?WA=wsignin1.0

  Keep us informed on the issue.

• Getting the error "there was a problem starting C:\Program. The specified module could not be found"during the uninstallation of Panda antivirus.

  When I try to download a new security software on my laptop, he insisted first of all, I uninstall my existing software, but when I click on uninstall, I get the following message:

  "There was a problem starting C:\Program. The specified module could not be found. »

  Then, I went in my C: drive and tried to uninstall by clicking on it and clicking Security software on uninstall, but the same message came.

  Help, please!  I don't know that I now have no security.

  Thank you.

  Original title: Windows 8 - error DLL Run

  Use the uninstall program to remove it from the computer:

  http://www.pandasecurity.com/resources/SOP/Uninstaller.exe

  Directions for use:

  http://www.pandasecurity.com/homeusers/support/card?ID=55509

• Error loading c:\programdata\microsoftservicetray.dll the specified module could not be found

  I'm as Vista Home Premium on an HP of Notebook.The above error message is displayed at startup. I recently had an unexpected stop down and the computer restarts until it done a system restore. Since then, I get the error. Otherwise, I can't say that there is a problem and the system seems to work very well. Anyone know what this system tray or it does and if it is important? Is there somewhere I can go and download any module it is? Is it a thing of Windows or another program of MS? I tried a couple of the miracle solution and that they will not detect.

  Hello

  ·         You did changes to the computer before the show?

  Method 1: Try to boot in safe mode and check if you get the same error at startup. Check out the following link to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest that you can exercise SFC scan and check if it helps. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

  Method 3: I also suggest you to run a full scan of the system on the computer by using the Microsoft Safety Scanner and check if the computer is infected with the virus.

  You can download and run the Microsoft Safety Scanner from the following link.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Error "the specified module could not be found" when the USB drive is connected.

  Original title: execution of disk error hard usb

  I use windows 7. whenever I have plugin a usb drive and open it it gives a shortcut of the same drive without showing all data and when I opened the short cut, the following error is displayed.

  There was a problem starting 4 # .ini
  The specified module could not be found.
  I also try to activate windows bit defender it gives error

  Internal error of shell. Please contact the software developers

  Code = 0xC000005, address = 0x10059E8D

  Hi Prashant,

  Try to uninstall the security essentials and install avast.  I have installed trial version, he found an additional virus and after that my system works fine.  Try it and check if it works.

  Concerning

  Patricia

• Start error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found."

  Original title: run DLL error message

  When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found.  I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found.  I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking.  Thanks for your help.

  Hello MaureenCYB,

  Thank you for the question!

  I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll. The specified module could not be found. »

  I am running Win 7 Pro.  On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll.  The specified module could not be found. »

  The error msg box provides an OK button. After clicking this button, everything seems to work well.

  FYI, I use AVG Virus Protection program. I did a system restore to a date before when I think that this problem started. No luck there.

  I suspect some malicious programs hiding somewhere and part of it may have been removed by AVG, but not all.  Anyone know what program calls for this file? How can I get rid of this problem?   Any suggestions would be welcome.

  Thank you.  f* address email is removed from the privacy *

  Disabled under msconfig.exe startup items are moved to this location in the registry:

  HKEY_LOCAL_MACHINE Tools\MSConfig
  To permanently delete, you can delete the key relevant to this place. Method of the prudent man will like so:
  1. Burn a CD of Windows repair. Everyone who makes his own PC must have a maintenance.
  2. Create a System Restore Point.
  3. Start the computer with the CD in repair and check if the above Restore Point is visible.
  4. Start normally.
  5. Remove the offending registry key.

  Please mark my answer as 'Response' in this thread so that it can be closed.

• After the clean boot get error loading awuspn.dll and load yabbyx.dll error. The specified module could not be found

  Hi Thahaseena,

  Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?

  Thank you

  Well, I want you to do is run MalwareBytes.  You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?

  Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software.  What is the name of this program.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Cannot install Intellimouse on XP, I got an error message: error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  Original title: cannot install Intellimouse on XP

  Hello

  I have mouse Intellimouse optical 1.1, I want to customize sound buttons.

  Recently, I tried to install its driver on laptop T410, installed with XP 32 bit operating system. Unfortunately, I got an error message:

  Error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  What is the problem?

  Thank you

  Uriel

  Hello

  Please try this and report results:

  1. Click Start, point to settingsand then click Control Panel.
  2. Double-click System, click the hardware tab and then click Device Manager.
  3. Double-click mice and other pointing devices branch to expand it.
  4. Right-click the IntelliMouse pointing device, and then click Properties.

     The IntelliMouse pointing device should be listed as follows:

     Microsoft USB IntelliMouse explore (IntelliPoint)
  5. Click to update the driver.
  6. Click Next in the Wizard update device driver dialog box.
  7. Click display a list of drivers that are known... , and then click Next.
  8. Select the Microsoft mouse driver that ends with (IntelliPoint), and then click Next.
  9. Click Next to confirm that you have selected the right driver.
  10. Click Finish to complete the installation of the new driver

• I get the message error loading 3da1a2 ~ \dojrjrj2h.cpp the specified module could not be found

  Whenever I start my computer, I get the message error loading 3da1a2 ~ \dojrjrj2h.cpp the specified module could not be found. Anyone know what this means? Help.

  Moved from Vista devices and drivers Forum.

  Hello

  Google has no information on this file, so it's probably a Malware startup more entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  This could be caused by malicious software. Your antivirus may have removed part of it or prevent it install completely.

  Run a full scan with your antivirus, download and run Malwarebytes Anti-Malware freehttp://malwarebytes.org/

  To prevent the display of a message run Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx . You can look up the references to the file and disable the entries.

• I get an error, "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd" "the specified module could not be found" when removing malware.

  Original title: RunDLL error "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd.
   
  I tried to deleted manually scamware/malware (your computer has been locked by the U.S. Department of Justice) from my computer. After reboot I get this RunDLL error "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd" "the specified module could not be found" if I click ok or X it stays just black. Please help me if you can. in a lay mans language as much as you can.
  I'm not much more than a geek, but can still manage my own if you tell me exactly what to do. Please include the step by step instructions. Thank you

  Two things... one, take a look at this site for some information and instructions (where something is hanging out)
  http://www.selectrealsecurity.com/malware-removal-Guide/
  and to know exactly what is running at the start have a look at this tool.
  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• "iphbrbtf.dll the specified module could not be found" error starting

  When you open my computer laptop OS xp, got this message at the opening of service pack 3, I got this error RUNDLL XP loading C:\WINDOWS\system32\iphbrbtf.dll the specified module could not be found.  How can I remove this annoying message?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

  Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

  RUNDLL

  Error loading c:windows\mcycol40.dll

  the specified module could not be found.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.