error message "cannot find the image file: $lib/Textures/Fields.png.

Similar Questions

• "Se error message" cannot find the < required > file in the < place > during Internet download

  Original title: I'm not able to save my downloads of web due to change in a techniical framework. What should I do?

  the message that I get while opening the download is described as under .pls try n help as soon as possible cos all my work is on hold.

  
  
  
  
  Cannot find the file in the
  
  
  
  
  
  

  Hello

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps mentioned below, if Internet Explorer is installed on the computer.

  a: Open Internet Explorer.

  b: click on Tools > Internet Options.

  c: Then click on the Security tab.

  d: then click on the custom level button.

  e: Now navigate to the downloads section.

  f: Then select Activate for the download file option.

  g: then click on ok > apply > ok.

  Hope this information helps.

• during startup, I get an error message 'Cannot find the resource file' how to restore this file?

  I had a virus fakespypro.  After it has been deleted I can't access my resource file at startup.  I need to reinstall windows vista to restore it?

  Hello

  This message is probably part of the scythe. Is there more information you can give about this?

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

  I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian

• Firefox update has just finished and now I can not restart Firefox. Get the error message "Cannot find the duration of mozilla"

  Automatic update of Firefox has just finished. After the update update, tried restarting firefox and I received the error message "cannot find mozilla runtime" I tried to restart the computer, but it did not help. How can I fix this so I can restart firefox?

  Hi rjadja, please see if it does not work properly after reinstalling firefox with the full installer instead which can be obtained from https://www.mozilla.org/firefox/all/

• Mini 101NR - restore to fail, error message "cannot find the file.

  While restoring my Mini 1010NR with 8 GB SSD from the disk of XP SP3 operating system, everything fine until partially through the recovery an error message saying that it cannot find the i386\ASMS file.

  I tried the options "install fresh copy" and "repair" and get this same error message in both directions.

  I formatted the SDS with both regular and quick NTFS file system. My OSD software gives me the possibility of formatting of the SDS with fat? I have not tried. That I should?

  I looked at the CD, and in the i386 subdirectory, I see a subdirectory called ASMS. I see several subdirectories in this directory.

  I am booting from an external CD/DVD drive. This seems correct, as the installed much restoration program file until stopping in the message saying that it couldn't find the file ASMS.

  This OSD provided with the computer when I bought it new at HP.

  Thank you

  Peter

  The cd is corrupted or damaged or installation loses communication with the CD-ROM drive. If you can, try another cdrom drive.

  http://support.Microsoft.com/kb/q311755/

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• Error message: "cannot find the wireless device" and not scan using 3 in 1 copy fax print HP 4500.

  Original title: Carpenter

  I can print but can't scan. Tried to uninstall then install the 3 in 1 copy fax printing hp 4500 but says cannot find the wireless device.

  Hi Ryan,

  You can check the link to HP support to run the HP Diagnostic Utility to check the issue of scanning:

  Find and fix common problems using tools of diagnosis HP printer=

  You can also check out the link to HP support and try to update the latest drivers/software for your printer:

  HP support

  You can also read the articles and check if it helps:

  Add or remove a scanner

  Scanning: Frequently asked questions

  The problems of scanning

• Windows error message "cannot find the file K:\$MFT or K:\System Volume Information.

  Original title: Windows Error Message.  Cannot locate the file K:\$MFT

  Periodically, I get an error message stating that Windows cannot locate the file K:\$MFT or K:\System Volume Information.   In this case my computer loses contact with K (my backup drive).  The only way I can get the command back up and running is to shut it down, restart windows and then reconnect the drive.  I have absolutely no idea where, why, or what this message is not irritating and a nuisance.  How can I stop this?

  My problem is back and I guess that I does not after all.  It was suggested that more info on my system could help find answers.  I am running Windows XP. SP3.  My HD is 500 GB.  Intel Core 2 CPU.  6600 GHZ, 3 GB of Ram.

  In addition the cannot locate the message file, it sometimes indicates that a "delayed write failed" and I should save the K:\$MFT file also.

  As far as I can tell, I have solved my problem.  Windows 'Restore' was trying to save my disk backup for future use, and I think it's whence came the message.  I changed the settings to restore now ignores my backup disk and the problem has not happened since.  I hope it's the end of it.

• Error message "Cannot find the point" when deleting a file

  I'm deleting a file using two drag and drop for recycle bin and do a right-click with delete.  On several occasions, I get an error message "could not find the point".  I scanned by drive for errors, and it does not solve this problem.  Any ideas on how to get rid of this file?

  For what it's worth, the item is in my favorites folder, and this is the URL for a web page.  I don't know if the extra fact is important or not.

  THX, David

  What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away. Once registered. I click with the right button on the new file and rename the exact name as the file problem. Don't forget to change the file extension (ex: .doc)

  ex file problem: word.doc

  new file: word.doc

  as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.

• Whenever I start my computer I get an error message "" cannot find the file M3PLUGIN. "." DLL. How can I solve this. ___

  This happened only after I deleted my temporary files, but does not see why this file would have been affected

  The file is part of the malware MyWebSearch toolbar. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• error message "cannot find the c:\windows\amopifat.dll.

  Anyone know how I can restore this file and what it does?

  Thank you

  Doug

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.  Search for amopifat.dll had no success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

  Since I tried Norton-specific registry, but the message still appears.

  Don't do that again.  If no error has appeared after you run this tool, count you lucky.  Long MS MVP PA Bear:

  If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Cannot download game - error message "cannot create the temporary file.

  Run windows 7 Home premium edition. Don't let me download games on a gaming site (Zylom). Used to have no problem with XP. Now on a new computer and cannot block the security settings. I get the error message - "unable to create the temporary file. It's very frustrating because it goes through the procedure of full download and then does it all at the end!  Help, please... I have run Norton 360 on the computer.

  Hey,.

  Same mistake - http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/cad374f2-7da2-448b-bd92-23154763b9ec

  As suggested, you must post in http://www.zylom.com

  Dana

  Girls. You never know what they think.

• Windows error message "cannot find the Web site.

  Whenever I have access to a Web site, I get this error message: "Windows cannot find (specific Web site).  Make sure you typed the name correctly and try again"

  Firefox crashed and I restarted in safe mode with all disabled add-ons.  I'm adding the Add-ons, but this windows error message persists.  How to prevent the error message since websites load normally anyway?

  Hello

  Try to Reset Internet Explorer and check if it works.