Error message: "CPU is unworkable or has been changed. Please check CPU SOFT MENU again. »
Original title: cpu is unworkable.
At the start of my pc, I get the error msg "CPU is unworkable or has been changed. Please check again CPU SOFT MENU"
I offer a press F1 to start - it works fine & the pc works normally
Any ideas please?
David
Hi David,
You did it of any material changes or software on the computer before this problem?
I recommend to reset the BIOS (Basic Input Output System) and check if the problem persists. If you are not comfortable to do, you can contact the manufacturer of your computer for help.
Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.
Hope the helps of information.
Please post back and we do know.
Tags: Windows
Similar Questions
-
Whenever I'll sign in my e-mail, I get an error message saying that my account has been blocked temporarily. I changed my password, and I always get the same messages. I can't send email because it asks me to verify my account. When I do, I always get the same message. What can I do else? Help!
Hi Tom,
Are you referring to Windows Live Mail? If so, I would say that to visit the Windows Live Solution Center that is not a problem we can help solve the answers: -
original title: whenever I try to open the Task Manager, I get an error message that says that it has been disabled by the administrator. But I never turned it off. How to enable Task Manager?
How to enable Task Manager?
Try the solution in one of these KB articles:
"Task manager has been disabled by your administrator error.
<>http://support.Microsoft.com/kb/555546 >
<>http://support.Microsoft.com/kb/555480 >HTH,
JW -
I am trying to set up a window to the top-
-follow the instructions of top to select a backup disk - I did-Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.-in the past, this disc has been used ONLY as a backup disk-When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.-I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."-Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".-l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.-When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?(I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"Original title: Back Up system - disk and checkSince this is a secondary drive chkdsk/r can be run without having to reboot. Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ». This will cause no harm. Although not strictly necessary, I recommend you to reboot once completed the disk check. This will solve any problem related to the file handles.
If chkdsk/r reports bad sectors, you should replace the disk. -
I have problems with Windows7 Home Premium and WWII CFS joystick operation. I get a message from gibberish, saying that the controller has been changed. I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file. Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either. Any suggestion would be appreciated.
Thank you
Hi Bob,
You can consult the following links of wire and check if it helps.
Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?
With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium
Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
Trying to put the printer on the wireless network, but I keep get message that implemented has been blocked on this machine, please contact your administrator or the person who set up the printer.
Hey @pennysem,
Welcome to the Forums of HP Support!
I understand that your HP Officejet 7612 Wide Format e-all-in-one seems to have a blocking administrator on what prevents you to set up a wireless connection between your printer and your computer Windows 8.1. I would like to help you today with this problem of locking administrator.
Now I will send you a private Message with instructions on how to perform a Semi full Reset programming on your printer. Please check your Private Messages for instructions.
If you reset that I have as much solves this problem, please indicate my post as a Solution for other users of the HP Support Forums can easily find these steps. Good luck!
-
What should I do when I get an error message relating to a code not valid when you try to download DC Pro?
you don't need a code/serial number to install a trial version.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Has anyone else had this problem with trying to buy Adobe photshop.
Hi Ozziegirl,
Please check the Doc: How to complete a purchase when I get an incorrect error 'country'?
Kind regards
Rave
-
Original title: missing dll file
A DLL (msypd.dll) was damaged by a virus and moved to the virus vault and cannot be resolved. How can I replace this file?
Take a look at this site to remove the malware. It has some great information and instructions. It does not hurt to try more than one virus scanner (note - run only one at a time on your computer).
http://www.selectrealsecurity.com/malware-removal-Guide/I hope this helps.
-
Screen turned white. shortcuts work well.
I think that this is not a Firefox issue. Please try this: right-click on the desktop, choose "Properties", click the "Desktop" tab and 'Customize Desktop' > 'Web '. Deselect or delete the web addresses in the middle area. And click on 'Ok '.
-
Is there a way to fix this?
Hi ReyXimenes,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
Dear Experts,
When I try to open orders placed under the responsibility of the management of orders, I received this message:
ORA-04062 of has been changed.
I completed the process 12.1.1 to 12.1.3 successfully upgrade.
Your help please.
Ahmad
I solve the problem as follows:
1-source file Env
2 - go in the path /u01/applR12/apps/apps_st/appl/au/12.0.0/resource
run the following:
frmcmp_batch OEXOELIN apps/apps module_type = library compile_all = y
frmcmp_batch OEXOETRE apps/apps module_type = library compile_all = y
frmcmp_batch OEXOEHDR apps/apps module_type = library compile_all = y
-
Hello!
I have a problem with a server that does not start.
We had a virtual machine running on VMWare Infrastructure 3 with two hard drives and an instant backup of them.
This machine has been removed from the inventory, but when it has been recreated, the secondary hard drive is mentioned for the basic-disk vmdk
instead of being referenced to the instant vmdk and used for a few days.All changes made after the snapshot, were kept in the delta snapshot file, which is not loaded.
We are with difficult to reference the secondary disk for the snapshot file. We tried to edit the .vmx and hard disk files
to correct the CID made reference, but when we try to start the virtual machine, we got this error:"The virtual disk parent has been changed since the child was created.
I think it happens because we made a blow-up of a secondary drive a few weeks after the backup snapshot. We spent 30 GB to 50 GB.
And because it has been referenced and used in another vm.*** Log is attached
Thank you
Bruno.
It is a bad sign
next step in the usual forest is to use "testdisk" since a LiveCD to set the tables MBR and partition - if possible
-
Your copy of disk image has been changed since the last opened or saved (Mac OS)
I sometimes get a message that "image disk copy has been changed because the file has been modified, opened or saved. The OS 10.6.6 and I use CS5. It happens on any specific file. All my files are big enough. The current that what happens on is a body which is 3.26 G not flattened. I have the ignorance has always ignored the message and saved anyway. I never detected damage or noticeable changes in the files after ignoring the warning, but after looking for Adobe forum and read a thread on what is happening in CS4, I guess I should be more careful and do a save as and change the name of the file. I started this thread because no one reported the issue happening in CS5.
The files have been all given to me by ftp as psd, tiff or raw camera files. I work on the copies of the originals in no other program but photoshop and open and closed files several times before getting the message about disk being edited copy. All my files are saved on a hard drive internal and backed up to a time capsule device. I am on a network, but I'm the only user of the network. The files are worked and saved on an internal hard drive on the same computer. They are never open on another computer which is usually disabled. I don't use any antivirus software except what is native to the operating system. The only other applications that I am running when this message are safari, mail and sometimes fill.
Why I get this message and what is causing changes (which I can't find) to disk copy?
The message means what it says: something outside of Photoshop changed your file on disk since the time that Photoshop saved the file.
We do not know what might change them - just the operating system returns a different modification to the file date that applied when Photoshop saved the file.
-
messages saying my windows xp has been stolen? Error 8024400 a
ORIGINAL TITLE: need help ASPA
I get a message saying my windows xp has been stolen? 8024400 has error messages
This error message means that the connection to the server was lost. Please read here
http://Windows.Microsoft.com/en-ID/Windows7/Windows-Update-error-8024400a-8024400d-or-8024400e
Maybe you are looking for
-
How can I remove all but a few emails in my Inbox?
I always end up with too many emails in my Inbox, and removing one by a hard too long and is a tedious job. So how to delete all emails in my Inbox and other folders, except the emails I want to keep?
-
I use subfolders in Yahoo, but Thunderbird is pulling for new messages at the same time the subfolders and the spam folder.
-
Satellite M50 226 hangs after the victory of logon Wlan is turned on
Hello everyone, I had a problem with my satellite m50-226.It happens quite often that when I boot up my laptop a card WiFi is turned on, the computer hangs after windows journal.When I type my user password nothing happens and a few seconds later, th
-
BIOS Configuration Utility (BCU) for HP Z840 workstation.
Took a look in the download section for the workstation Z840 but could not find. Someone has a link to this software need a 64-bit version and must be compatible for the new workstation Z840. P.S. This thread was moved from workstations - z dad serie
-
Satellite P200: after formatting, no more wireless
Hello I have a Toshiba Satellite P200 PSPB0E with Windows Vista 32 bit PC. I simply formatted and I was amazed that I don't have the wireless, so I guess that's the driver because my button "wireless" is enabled. My network card is a "Realtek rtl 210