error message in the terminal window

Similar Questions

• I get an error message in the browser window that says: ' we are currently experiencing some issues, please try again later ".

  I use Chrome.

  When I try to down load a creative Cloud application, I answer the questions, then click on "continue".

  I get an error message in the browser window that says: ' we are currently experiencing some issues, please try again later ".

  It makes no difference to try again later.

  Try links below:

  WINDOWS:

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  MAC:

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• I get an error message that the downloaded Windows 7 is not a valid ISO file when you use Microsoft Windows 7 USB/DVD Download Tool.

  I would like to install Windows 7 32 bit Home Premium on one of my old notebooks - I have the license key, but no media. The DVD - ROM drive is not reliable stuff, so I thought that a USB stick installation would be worth a try.

  I have downloaded the file ISO in Digital River today, only copied the hard drive of my computer.  I installed the MS tool to make a bootable USB key.  When I select the ISO file I have downloaded, I get an error message that is not a valid ISO file.  No idea why?  He came from Digital River, so it should be a good record.

  Original title: Microsoft Windows 7 USB DVD Download Tool

  Digital River download site has been up earlier this week, and I downloaded another copy, so Windows 7 Home Premium - 32-bit.  The name of the ISO file differs from previous downloads of this site, but this time, it worked.

• Error message after upgrade to Windows XP on the Microsoft Update site

  I have just taken delivery of a Satellite Pro A120 and updated the XP components on Microsoft Update, windows site when the system has restarted to make the changes he developed an error message during the final phase of the start-up of the user.dll Realtek.

  It basically says that user32.dll was written to memory, because the location, as it was stored was reserved for windows components. The file in question is c:windows\system32\hhctrl.ocx, this caused some components of the system sound not working.

  He advises me to realtek comtact for a new dll? The last player on the download from Toshiba site is older than the one installed. Any suggestion please.

  Thank you

  Hi mohamed

  Thanks a lot for this useful info!

• Re: Satellite P200-1EE - displays an error message in the windows Boot Manager

  I left my laptop alone and down for a few hours and when I'm back on him shows an error message in the windows Boot Manager.
  It says unable to start windows and a recent hardware or software change might be the cause. It asks me to insert my windows installation CD, and if I n t have the CD then to ring for help but unfortunately I really can t find a number at the present time.

  It also reads this:
  File: \BOOT\BCD
  Status 0xc000000f
  Info: an error occurred trying to read the boot configuration data.

  Does anyone know how to deal with this, or this happened to anyone before?

  Hello

  Maybe this article can help http://support.microsoft.com/kb/927391

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• You met the C00D10D1 error message when you use Windows Media Player

  Hello

  I have no sound through Windows Media Player and also a player from Youtube and BBCi.  I have the following error message, please notify :-)

  You met the C00D10D1 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Codec is missing

  Windows Media Player cannot play the file (or can't play the part of the file either audio or video) because theMP3 - codec MPEG Layer III (55) is not installed on your computer.

  The missing codec may be available for download on the Internet. For more information about codecs, seeCodecs: frequently asked questions.

  Hello
   
   
  1. What is the file type or extension that you try to play?
  
  If you get a message stating that your computer is missing a codec, you are probably trying to play, burn, or sync a file that was compressed by using a codec that does not include Windows or the default player. You will need to download codecs.
  Player Windows Media for Windows XP supported Codecs
  http://support.Microsoft.com/kb/291948
   
  Package of Installation of codec
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en
   
  See also:
  Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)
  http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55
   
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
  Note: The above are published in the Windows 7 category, but they apply to Windows XP too.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get 8004FF83 error message during the installation of Windows updates.

  I checked why an update failed. He tried 3 times between 2/5 and 4/5 with this error message on the screen for updates. AST is a security update what to do.

  Hello

  1. What is the name of the update that failed to install?
  2. at what point the update fails (download or installation or configuration)?
  3 are you aware of any changes made to the computer, before the show?

  Method 1:
  Run the fixit available at the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Run the tool on your computer system update.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Hope this helps

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

  I am trying to set up a window to the top-

  -follow the instructions of top to select a backup disk - I did
  -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
  -in the past, this disc has been used ONLY as a backup disk
  -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
  -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
  -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
  -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
  -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
  (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
   
   
  Original title: Back Up system - disk and check

  Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
  If chkdsk/r reports bad sectors, you should replace the disk.

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly.

  Hello world

  Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly. (or something like that... I work in German...)

  I just bought all Deinstalled CC all and installed again and again.

  The problem persists... just with premiere pro cc 2015.2... I'm working on windows 7.

  You have an idea?

  Thank you very much

  François

  You can please go through the requirements for Premiere pro - Premiere Pro system requirements for Mac OS and Windows

• Is it possible possible to recover my data from my drive hard after receipt of this error message is the reference to hal.dll

  This error message is on a Windows XP Home Edition.

  «Windows has not start because the following file is missing or corrupt: Windows root\system32\hal.dll»

  This occurred after the use of the Norton Symantec solution to get rid of malware Tidserv activity.  After trying to restart my computer after the removal of the malware, assuming she was kidnapped, I got this error message.  I had backed up my important files on an external hard drive some time ago, but I still want to recover from this if possible.  It is an old Dell Dimension 3000 series and I don't have the CD that came with that installation.

  Thank you

  You could use another method to start your computer (like a Knoppix/Ubuntu or Hiren boot CD) and copy them to your personal data to an external device, you can move/slave your HARD drive to another system and see if you can copy the data off that way.

  This could work, but for me this looks like a lot of trouble and I only take it only after having exhausted all other methods of fixing what you have.

  Assuming you want to fix what you have (or at least make an effort to do so)...

  Despite what the message said, interpret it as meaning that XP just cannot find the file or XP is told to find the file in the right place.  This means not the file is missing or damaged - XP just cannot find it.

  There are two things to do that don't require to have an installation CD:

  run a chkdsk/r from the XP Recovery Console
  you rebuild the file c:\boot.ini from the XP Recovery Console

  Start with the chkdsk command, and here's how:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.