error message indicates that there is a problem at the opening of Skype, and it should close, send a message to Microsoft

When registered user (not administrator) and the computer boots it will not open Skype but it gives me a message that there is an error and you must stop it and advise microsoft of the problem.  This problem just started a couple of days.  I'm aware of microsoft updates and have the latest version of Skype on the computer.  I uninstalled and reinstalled same.  I checked my Norton firewall and allowed to access Skype.  What can I do now?

Advertisement

the administrator can open the Skype ok to prove it loads and works.

Tags: Windows

Similar Questions

  • I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

    I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

    Mac or PC? Version of the OS? What version of CS?

    Have you tried to reset the bridge? CTRL (Windows) / Opt (Mac) + click on the bridge to start icon and select open boxes.

    Otherwise, you could manually delete the cache, but we need to know the answers to questions to say where he is.

  • I'm trying to download a game called football superstart, but there is a problem because when I try to open it there is a message that says that there was a problem with the administrator of the House

    OK im trying to download soccer superstar but I can download it but I can't open it because it shows a message that says that there is a problem with the House administrator I will try to find a solution to this problem can you guys please help me thank you.

    Hello

    1. could you give us the exact error message?
    2. based on what site you are trying to download and install the game?
    3 are logged as an administrator of the computer?

    Once the installation file downloaded, I would ask you right-click on it and select run as administrator and then check.

    I hope this helps.

  • After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

    * Original title: hard drive

    I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

    Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

    If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

  • Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

    Original title: How can I fix external MSI?

    When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

    Hi John,.

    ·         You are able to install other applications on the computer?

    It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

    http://support.Microsoft.com/kb/923100

    Hope the helps of information.

  • Photoshop elements 13 said that there was a problem with the download and recommend exit us and restart

    We bought a new laptop and 13 items today. We spent the day trying to get it set up. We tried to download the 13 items at least 6 times. Whenever it took about 45 minutes to download, but when we open the file and click on set up it says that there was a problem with the download and it recommends that stop, restart and download it again? How we work what goes wrong? We had to remove the files and start every time. I don't have another day to try to get this sort. Should not it is just a matter of downloading and then, should not come with a message to install and we just press Yes and it works.

    You can also download the trial version of the software directly (No Download Manager) through the page linked below and then use your current serial number to activate it.  You should get two files, an executable file and a compressed file.  Run the executable file and it will install the rest.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images

    Hello

    I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images (ie the rotating EGTC)

    Now, I see the image preview and it disappears to the flower, so I did not see one of my photos

    Some would like TO help on this im so not good with this kind of thing.

    Appreciate it in advance

    Let

    Hello

    • When you change the format of images of?
    • What is Windows Explorer or Itunes?

    Try the TV activation

    Enabled and disable the Option 'show window previews (thumbnails) '.

    a. right click on the taskbar.

    b. Select Properties.

    c. check show window previews (thumbnails) "Option. .

  • has had an alert that there is a problem with the installation of IntelliPoint software

    I got an alert that there is a problem with the installation of the IntelliPoint software. To resolve this problem, you must remove IntelliPoint software, and then run Intellipoint Setup again.  If I have remove it where do I go to run the installer?

    Hello

    You can go here: http://www.microsoft.com/hardware/en-us/downloads

    then select the keyboard and mouse or other device you can download the latest version of the Intellipoint software.

    Thank you...

    The thread is placed automatically in Windows.

  • I can not express outlook to work on this laptop. Emails from test provider sent e-mail that came on the old laptop, but not this one. Error code indicates that there is an error with the password.

    I can not express outlook to receive or send emails usning my other e-mail account.  Their support had me through each entry several times but I still have an error code indicating that my password is incorrect.  The provider to reset the password and I did the change in outlook and it says that the password is incorrect.  They suggested that there may be a software problem in my outlook express.  Your thoughts?

    Completely remove the account. Restart, and then add it again. Who help me? If this isn't the case, you can get enough to try a new identity?
     
    You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
     
    Note: Do not use the main word in the name of the new identity.
  • PC indicates that there is someone else on the net with the same ID on this net work I use

    my pc shows that there is someone else using the same ID that I'm on this net work

    Hi Robert,.

    The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

    1. What is the exact full error message?

    2. When you receive the error message?

    3. do you use wired network connections / wireless?

    If the message is all using the same IP address, I suggest you to reset the router and then reassign the IP manually once and check. You can go through the link to do so.

    Change TCP/IP settings

    http://Windows.Microsoft.com/en-in/Windows7/change-TCP-IP-settings

    Response with more information to help you.

  • My laptop is windows 7 and with most of DVD it says that there is a problem with the digital copy. I'm also having trouble changing the region

    the exact message is: "windows media player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. When I click close it comes with this another message saying that my DVD system is set to the region one and I need to change it to region 2. I have change for the region, but he said: "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. ». I don't know what to do.

    There is a chance that the free VLC Media Player
    would be to read your DVD without changing the region code.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)

  • I think that there is a problem with the cache, Rom or bios

    everything changes every time I start windows, for example I must maximize the window workstation, every time I start the pc in my previous pc once I expanded the window and I closed the windows recognize my choice "maximise window" and the window opens always maximized... also in programs like photoshop the program changes the interface whenever I turned off the pc and open it

    Hi Marc,

    Write us with the following details so that we can better help you.

    ·          What changes do you see in the interface of Photoshop?

    There is no problem with the BIOS ROM or with the cache. I suggest you follow the steps below.

    (a) open a Windows Explorer, optimize it click on the arrow next to the button of the view on the toolbar, and then choose a display setting.

    (b) on the toolbar, click organize, and then click folder and Search options.

    (c) in the folder Options dialog box, click the view tab, click apply to folders, click Yesand then click OK.

    Write to us with the details asked. We will help you to come.

  • Impossible to make a PDF from Word - message says that there is a problem with the snap

    I use Acrobat Professional 12 and Microsoft Office 2016. Using the Acrobat plug-ins menu item, I click on "create a PDF file. the process starts, then I get a message that Word has stopped working and it closes Word. The following message appears saying: Word find problems using the ' acrobat pdfmaker office com component after software plug-in. If this continues to happen, disable this add-in and search for available updates. You now want to turn it off?

    -I'll then check for an update and see if it works. Anyone experience this problem?

    Problem is due to a bug in the update for Office 2016 / Office 365.

    Microsoft fixes this bug and today (4 March 2016) allows to correct accidents.

    -Dov

  • I got a call from people claiming that there was a problem with the computer.

    Original title: scammed by PCWizards?

    A few days ago I received a call from PC assistants saying they were Windows operating system support. They tell me that they have noticed that I had many requests from spam junk that was slowing down my computer. Unfortunately, as I had a big problem with my computer in time, I bit. I was very nervous about it at the time, but since I had so many problems with my computer and that you didn't know what to do, I fell prey to their plot. They talked to me in a 6 month contract for a fee of $99.00. After they have finished the maintenance on my computer, it worked very well, too gullible me thought: maybe they are legitimate.

    At the end of the interview I googled their business and came across an article that has been exposed as the crooks and claims that Wizards PC installs a spyware sophisticated by giving them access to the victim's computer remotely.

    To reassure myself, I decided to call using my Norton Security System. Their technician checked my computer and found a few things that their technology did not that he should have done; such that no detected restore points, the registry was not cleaned (35 detected registry errors) and it did not remove some software malware browers (toolbars).

    On his recommendation, I recalled PC assistants. The first tech I talked didn't seem to know what he was doing, so I hung up with him and sent their support line and ask them to address these problems or I would withdraw the payment from my credit card. Almost immediately after sending the e-mail, another technician called me. Unknowingly, I had all ready filed a dispute with my credit card company. I intend to cancel the service, but I am still concerned by some spyware detected on my computer. What is the best way for me to handle this? How can I get authenic proof that I was definitely scammed and I should report it to the Internet Crime Center? Using my computer for a few basic daily functions, must not be so stressful!  Any constructive guidance would be greatly appreciated!

    (Scammed in PA)

    After they have finished the maintenance on my computer, it worked very well, too gullible me thought: maybe they are legitimate.

    At the end of the interview I googled their business and came across an article that has been exposed as the crooks and claims that Wizards PC installs a spyware sophisticated by giving them access to the victim's computer remotely.

    Hello

    It's a scam.

    Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

    You gave them remote access and if you do Internet banking, contact your bank, explain, and change passwords.

    If you use your online credit card, cancel and get a new one issued to you.

    And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

    There is an article in the link I'm you provide at the end of this one

    Read this Information from Microsoft:

    "Avoid scams to phone for tech support.

    http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

    Don't be fooled of unsolicited calls. Don't provide personal information.

    Here are some of the organizations that cyber criminals claim to come:

    • Helpdesk Windows

    • Windows repair center

    • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  • See you soon.

  • CANT GET MY DELL V313w to print it keeps telling me that there is a problem whith the ink heads, in that I put new cartridges

    I.cleaned and replaced the cartridges three or four times BUT THE MESSAGE IS ALWAYS THE SAME AND IT WONT PRINT, SCAN or COPY

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/308028

    It will be useful.

Maybe you are looking for


HashFlare