Error message: "logon user interface host windows stopped working. & configuration of updates fail

Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

For your information, I use windows 8. so help me solve this problem. TQ

Hi ZakwanSalleh,

Thank you for choosing Windows 8 and join us on our community.

From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

Method 1:

I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

http://support.Microsoft.com/kb/929135

Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

Method 2:

I also suggest you to run a sfcscan and check.

The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

Follow these steps to run sfcscan.

a. press Windows + X keys and click / tap on (Admin) command prompt.

b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

NOTE: It can take some time to finish the race.

For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

http://support.Microsoft.com/kb/949358#method3

It will be useful. For other related issues in Windows area it always welcome in our community.

Tags: Windows

Similar Questions

  • Error message: "logon user interface host windows stopped working.

    Several days ago I started having the application error "windows logon UI host has stopped working".  It happens when I log on, as well as when I open the Task Manager.  I followed all the recommendations I found online (restoration of the system, sfc/scannow, check disk, clean boot), each several times.  Kaspersky Anti-virus is also updated.  How can I stop this error?  It causes browser crashes and slows things down.

    Hello

    This can happen if the computer is out of memory. Perform a clean boot and remove unnecessary programs.

    Check out the link and follow the steps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

  • Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working". How can I disable my old macbook pro and activ DEAD CS4

    Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working".

    How can I disable my old macbook DEAD pro CS4 and activate CS4 on my new mackbook pro?

    Hi Christophe,

    Please visit: https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

    Contact technical support for assistance:

    https://helpx.Adobe.com/in/contact.html?step=CCSN_adobe-ID-signing-in_stillNeedHelp

    I hope this helps.

    Concerning

    Megha Rawat

  • Failure of logon user interface after windows update

    After a recent windows update I get the following error.

    Winlogon.exe: The application or DLL c:\WINDOWS\system32\OBDC32.dll is not a valid windows image. Please check this against your installation diskette.

    After this window I get:

    User interface failure: could not load the DLL msgina.dll of logon user interface. Contact your system administrator to replace the DLL or restore the original DLL.

    The only option at this point is to restart that puts me in a vicious circle of the same mistake.

    I tried to login in safe mode by following the instructions in this article , but the same error messages.

    I use VMWare Fusion 2.0.8 and on OS X 10.5.8.

    Someone at - he had this problem and found a fix?

    Thank you!

    You will probably need to run a repair of Windows, the installation looks beat some key Windows components.

    KB.VMware.com/kb/1013846

  • Processor host Windows stopped working popup

    Whenever I use my computer as a message pops up saying windows host processor stopped working. How can I fix it? It is said online and are looking for a solution but my internet won't work either.

    Hi LOU 0507,.

    Remember to make changes to the computer before this problem?

    Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2:  Select the boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.


    Method 3:
    download and install the update that is available in the article below and then check if it makes a difference

    An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

    http://support.Microsoft.com/kb/940520

  • I can't go to Windows Update and updates. Also, my computer tells me that process host Windows stopped working. What should I do?

    During the windows start my computer running a disk check. It freezes during the disk check, and I have to restart the computer. I can jump the disk check, and my computer opens a session normally. However when I'm on my desk a box appears saying that Windows process host has stopped working. I can't check the updates of windows.

    Hi Prinny,

    I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

    To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

    1. Since when are you facing the issue?

    2. you have any security program installed on the computer?

    3 are you aware of any changes made to the computer before the show?

    You can run a full scan using the Microsoft Safety Scanner and check for infections.

    Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

    You can also run a scan of the file system Checker and check if it helps. This scan for any Windows check corrupted files and repairs and replaces them.

    If the problem persists, you can follow the steps and check if it helps.

    1. Click on start.
    2. In the Search bar, type Task Scheduler and press Enter.
    3. In the left pane, click on Task Scheduler, Microsoft, Windows, RAC library.
    4. Now, click the View Menu and check Show hidden tasks.
    5. In the center pane, right-click on RAC's Agent and click disable.
    6. Fact!

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

  • Microsoft Windows error message: "Dell DataSafe 2.0 has stopped working".

    On my new laptop purchased recently, I get an error message from Microsoft Windows: "Dell DataSafe 2.0 has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "I then select the" close program"button to close the message.  But, no info additional re: a solution is always provided and within a few seconds the error message recurs, repeatedly.  It's maddening, it goes without saying.  My DataSafe account is current and operational.  I can't find any info on the site of Dell re support: this error, probably because it's a message of Windows...?

    But it's a Dell software!
    You look at not only their website, contact you them directly.

    Contact Dell: http://support.dell.com/

    See you soon. Mick Murphy - Microsoft partner

  • Windows 8 - Photoshop CS5.1 crashes at startup. Error message: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

    Hello!

    I got the student version software Adobe Creative Suite 5.5 Design Premium for several years now.

    When I got my computer Windows 8 I installed the software without problem.

    Last week when I tried to open Photoshop, I get the following error: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

    I disabled and uninstalled all of the Creative Suite and then reinstalled. I am able to open other programs, but still the same message for Photoshop.

    What can I do?

    I found that the problem was with Nik filters I used. The filters have been messing around with Photoshop initialization. I uninstalled and reinstalled the filters and now Photoshop works like a charm.

    It seems that this forum is dead?

    Fortunately, I managed to solve the problems on my own and figured out the problem...

  • I received error messages saying that hl2.exe has stopped working.

    HL2.exe has stopped working?

    original title: hl2.exe has stopped working

    Hi 1patrick1!

    Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

    HL2. EXE has stopped working the issue

    Game error: HL2. EXE has stopped working

    Important:

    Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

    Third-party game support

    General troubleshooting

    Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

    Troubleshooting game crashes

    Windows Vista users

    There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

    Anti-virus software

    Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

    Background applications

    Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

    Disabling background Applications

    It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

    Hope it will be informative for you.

    The respect of

    Anurag Shukla
    Microsoft Certified Professional

  • Critical errors dealing with MRT.exe and error messages "Services and controller app has stopped working".

    I get two error codes... "Services and controller app has stopped working" and "Windows has encountered a critical problem and will restart in a min. Please save your work." The only time where it does it but when I plug my cable network. Already ran sfc and found nothing. Ran malwarebytes and removed a lot of viruses, I picked up, but I think that something in my registry can be screwed up after trying to remove the said virus. I was getting some kind of error MRT.exe and I tired looking for things to the top on this but I think I can have messed up a registry that was loaded entry of this and it has damaged something.

    Someone at - it answers that do not involve me having to reformat and install a new OS. I bought the computer off of a friend and it's a custom-made computer, so I don't have Vista Disc... while hoping a good solution.

    Help me please! :)

    Thank you
    Bishop

    In addition to using an anti-virus, as Malware/spyware scan:

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight...

    How to use Malwarebytes once it is installed and updated:

    1. open Malwarebytes > click the update tab at the top > get the latest updates.

    2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

    3 MBAM will now start to scan your computer for malware. This process can take some time.

    4. when the scan is complete, a message box will appear

    5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

    6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

    7. a screen showing all of the malware displayed the program that is

    8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

    9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

    10. you can now exit the MBAM program.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If you do not have a DVD of Microsoft Vista, borrow one from a friend.

    Read this tutorial on how to do a repair installation:

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    Regarding the relocation:

    You can borrow a suitable Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

    See you soon.

    Mick Murphy - Microsoft partner

  • Error message: MS office click-to-run stopped working and laptop keep freezing.

    I have a Samsung laptop, RV515 (1.65 GB and 4 GB of RAM, 500 GB) running on Windows 7 and MS Office 2007 Academic.

    I got the message 'not only respondents' for a long time, but they became more frequent, especially in Internet Explore but then also in Google chrome and Word. Then, I installed MS office 2013 and updated Norton in the same week and got a lot more message "not responding". I also downloaded a program that converts Youtube videos in files.  So I defragmented which took about 14 hours and a complete analysis of the system, which was another 9 hours. The laptop was faster that he had never been but then after a few days started to freeze in almost all programs. CLT-alt-del screen stopped appearing. I did a lot of system and controls maintenance, who says super fetch couldn't run, but everything else was okay. I tried a number of time to start to look great but every time I check it is said that it will not start.

    My Norton live-view disappeared at the same time I downloaded the Youtube converter (see above) so I deleted Norton in safe mode and rebooted, but it didn't reappear. Then, I thought that I should delete all parasitic programs that my son downloaded so I deleted a few games and Youtube converter, but also ' ETDware PS/2-X64_WHQL' thinking that was a game too! In any case, my laptop has complained and reinstalled.

    I have tried reloading MS Windows 7 and had this message: windows can not retrieve information about the disks on this computer.

    In safe mode Office Professional 2013 does not open, but the fact of MS Office 2007. So I tried to repair Office Professional and I got this message: click on MS Office to run has stopped working.

    Anyway, my current position is that my computer starts normally but which icon I click on (even the start ORB), it sends the hourglass spinning and the screen freezing. A few times I was able to open a program, but is that I get.

    I am not an expert as you have no doubt worked and have messed with it much too now and are out of options. Help someone?

    Hello

    1. How do you reload Windows 7, using repair disk or drive back?

    2 are conducting an update install?

    I suggest you perform a chkdsk and see if it helps.

    Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

    Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  • processor host Windows stopped working and was closed

    Vista still 'works' but at a snails pace.

    Hi MarkForker,

    1. When you receive the error message?
    2. Did you the latest changes on the computer?
    3. When was the last time it was working fine?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    So again, you get the error message, then view the event viewer to find out the cause of the error and the message comes back with the details.

    What are the information in event logs? (Event Viewer)

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  • startup error message: printer card transfer moniter has stopped working

    Thank you for your help.  I said that Microsoft will try to solve the problem... but the error message continues appeaering.

    Hi SIDDTHEEKIDD,

    1 when was the last time it was working fine?
    2 are you facing problems with the printer on the computer?

    It is possible that some third-party programs installed on the computer are causing the error at startup.
    I suggest that you perform the clean boot procedure and check if it works.

    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on Start, type msconfig in the search box and press ENTER.
    2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
    3. on the general tab, click the Normal startup option, and then click OK.
    4. When you are prompted to restart the computer, click restart.

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message at startup "SQLite 3 has stopped working"

    original title: problem with SQLite 3

    After you restore my computer, I received the following message and don't know what I have to do:

    A problem with SQLite 3

    SQLite 3 has stopped working properly.

    A newer version of this software is available for download that resolves this problem. SQLite is recommended to upgrade to take advantage of security and stability improvements

    The instructions seem rather - clear if SQLite developers/distributors recommends an updated version, visit the SQLite web site and see how to upgrade or replace your software with the latest version, recommended version.  If this software has come as part of another package, contact this seller of software for instructions or guidance package.

    writing in the new message: * e-mail address is removed from the privacy... *

    After restoring my computer I got the text message and don't know what I have to do: fix an issue with SQLite 3

    SQLite 3 has stopped working properly.

    A newer version of this software is available for download that resolves this problem. SQLite is recommended to upgrade to take advantage of security and stability improvements

  • I can't print. I get an error message that the spooler subsystem app stopped working. It won't let me uninstall or install a printer. ???

    My computer was working fine, until yesterday. I get a window of microsoft; saying that spooler has stopped working? What is a spooler? And how to fix it? I really need to print!

    Thank you very much for the help. I'm having a geek come and try to fix it. Thanks again.

Maybe you are looking for

  • My tab bar disapperared, how can I get that back

    Hi guys,.I've been messing around with the bar at the top of Firefox to bring them into a more practical. However when I recorded it, the tab bar disappeared. I have now 2 arrows in my favorite bar of web sites (don't know what it is for), but no bar

  • The window HP store

    To upgrade applications, I need to access the shop Windows, the green bag, but when I ever do, it brings me to the store itself, instead, he said "we were not able to connect to the Bank.  This could have happened due to a server problem or network c

  • Had a program Go Back Yes or Nea?

    Had a program once I think it was called Go Back. What do you think of it? Do you know how much it costs and the best place to buy it?

  • Vista BSOD NDIS.sys

    I'm running Vista 64-bit with SP2 and whenever I play a MMO computer I get a bluescreen error DRIVER_IRQL_NOT_LESS_OR_EQUAL and have to restart. The error that says its in the ndis.sys file. All drivers must be updated and all Windows updates are ins

  • Question - Article Andre Da Costa: how Downgrade Windows 7 editions

    Andre, I added this question to the section of the comments to your article awhile back. http://techingiteasy.WordPress.com/2012/05/12/how-to-downgrade-Windows-7-editions/#comment-34286 Can another question Andre, you use a DVD upgrade and keys to pe