error message "missing resource file imaqdx.rc.

With the help of LV2010, returned to a PC that has been used for a while access to some old programs of vision. On the block diagram, the property IMAQDX node is disconnected and when loading the file, I get a message that says: "lack of resource file imaqdx.rc.

Suggestions?

For anyone following this discussion, I have solved the error message, but only by removing all related AND then put it back. A major PITA!

Tags: NI Hardware

Similar Questions

  • Error message: Microsoft resource in the conversion object utility file coff has stopped working.

    I get a Windows error message:

    Coff file of Microsoft resources to object conversion utility has stopped working.

    Hello Pro V1,

    To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis may take some time to complete.

    Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • error message - your backup file is not valid. It may have been deleted.

    When I start my laptop I say error message-"your backup file is not valid. It may have been deleted.' I can't select one that he tells me to do and I can't get it back, what do I do to fix this error?

    Hello

    1. what operating system is installed on your computer?

    2. what file the error refers?

    Method 1: Start in safe mode and check if it helps.

    Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    Note: make sure to start the computer in normal startup, troubleshooting is completed.

    Method2: Start the computer in a clean boot and check if it helps.

    Windows XP: http://support.microsoft.com/kb/310353

    Windows Vista and 7: http://support.microsoft.com/kb/929135

    Note: make sure to start the computer in normal startup, troubleshooting is completed.

  • Error message missing from Shell32.dll

    Original title: error of shell32.dll from windows 7

    Have the new computer (2 weeks) came preloaded with windows 7 (without disks). I did a system restore and now the dam thing gives me just this error message missing Shell32.dll. Have attempted to overthrow the restoration but everything is frozen. What can I do?

    Hello


    1. When you encounter this error message? It does not appear when you use a particular application?
    2. also give us the complete error message?
    Shell32.dll errors are caused by situations that lead to the removal or corruption of the shell32 DLL.
    In some cases, shell32.dll errors might indicate a problem of registry, a virus or malware issue or even a hardware failure.

    Method 1:
    You can perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions. You can read the following article.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833
    Method 2:
    You can run a scan for virus/malware from your entire system. Some mistakes of shell32.dll may be related to a virus or other infection of malicious software on your computer that has damaged the DLL file. It is even possible that the shell32.dll error you see is related to a hostile program who is posing as the file.
    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
    It will be useful.
  • Printers HP 7520: Error Message "missing or damaged cartridge" displays when you install the new cartridge.

    When you install a new ink cartridge, we received an error message "missing or damaged cartridge. This was a new cartridge and seemed to be completely inserted in the carrier. There was no visible skin damage to the cartridge. Is there something that we are missing?

    Hi BobbyBaby,

    I'm sorry, you get an error message with your cartridge.  Sometimes there is a problem with the electrical connections and this can be fixed by rubbing and replace the cartridge.

    Here is a document to check that you are not missing anything.

    I hope that this clears the error message for you.

    Jean

  • Try to copy the corrupted user profile profile settings and I am met with the error message "too long file name!

    I tried to connect to my laptop today and instead of recording in the usual way a message that windows creates new office settings. When he finally connects me I get a message of bubble speech saying I was connected to a temporary profile, I reboot several times and the problem persists. After a little google research, I realize my old profile is probably corrupted... I have not downloaded a new software/hardware.

    I followed the steps of miscrosoft to copy the files from my old profile to a new user, everything in the file transfer went well until the last few files to copy. Then, I get this error message saying "the file names would be too long for the destination folder", only two options are cancel and skip available. Which are useful.

    I do not recognize these folders that are too long (the names are the random letters and numbers), I tried to look for them, nothing is done. And to be honest, I don't understand what that means.

    UPDATE: I decided to copy folder a bit at a time and it solved my problem, that all the files were copied successfully. However, now I was struck with a new problem. Whenever I try to access my files, I get a message that says windows cannot access the specified device, path or file. You may not be authorized appropriate. How can I fix it?


    It comes to my laptop and I administer it / have access to passwords, etc.

    It simply means that your old account was the owner of that file or folder.  You can change the security to access your new account.  Here are the instructions: http://windows.microsoft.com/en-PK/windows-vista/Troubleshoot-access-denied-when-opening-files-or-folders

    (It says Vista, but the steps are the same for 7).
  • Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no p

    Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no problem. Can someone help me? Thank you.

    Is there a file .idlk remaining on the server which is not removed properly?

  • Since the last update installed, I can not open my older files.  I get the error message that the file is not found.  Installation remove my old files?

    Since the last update of Adobe Reader XI installed I can shoot to the top of the list of all my files on the SHOW ALL option, but when I try to open my old files, I get the error message that the file is not found.  The update to remove all my old files?  Is there anyway I can locate, then open them?

    You can use Windows or Macintosh to search all PDF files and start to bring together them.

  • Error message 'missing; before the declaration 24 "

    Hello

    I get the error message "missing; before the declaration 24 "in the following script:

    Create a variable to hold the document object

    var StartDate = (xfa.form.form1.page1.signature.StartDate.rawValue);
    var EndDate = (xfa.form.form1.page1.signature.EndDate.rawValue);
    var assocName = (xfa.form.form1.page1.signature.assocName.rawValue);
    assocID var = (xfa.form.form1.page1.subForm1.assocID.rawValue);
    var assocEmail = (xfa.form.form1.page1.subForm1.assocEmail.rawValue);
    var assocExt = (xfa.form.form1.page1.subForm1.assocExt.rawValue);
    var assocDept = (xfa.form.form1.page1.subForm1.assocDept.rawValue);
    var mgrName = (xfa.form.form1.page1.subForm1.mgrName.rawValue);
    var mgrEmail = (xfa.form.form1.page1.subForm1.mgrEmail.rawValue);
    var salariedHourly = (xfa.form.form1.page1.subForm1.salariedHourly.rawValue);
    directReports var = (xfa.form.form1.page1.subForm1.directReports.rawValue);
    var perfRating = (xfa.form.form1.page1.subForm1.perfRating.rawValue);
    var howLongWorking = (xfa.form.form1.page1.request.howLongWorking.rawValue);


    PRESENT DATE
    If (StartDate == "") then
    xfa.host.messageBox ("Please enter a shipping Date");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.StartDate");

    HIRE DATE
    ElseIf (EndDate == "") then
    xfa.host.messageBox ("Please enter a hire Date");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.EndDate");

    NAME OF PARTNER
    Else if (assocName == "") then
    xfa.host.messageBox ("Please enter your name");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocName");

    PARTNER ID
    ElseIf (assocID == "") then
    xfa.host.messageBox ("Please enter your ID");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocID");

    EMAIL PARTNER
    Else if (assocEmail == "") then
    xfa.host.messageBox ("Please enter your email address');
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocEmail");

    EXTENSION ASSOCIATE
    Else if (assocExt == "") then
    xfa.host.messageBox ("Please enter your extension number");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocExt");

    DEPARTMENT ASSOCIATE
    Else if (assocDept == "") then
    xfa.host.messageBox ("Please enter your Department");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.assocDept");

    NAME OF THE MANAGER
    Else if (mgrName == "") then
    xfa.host.messageBox ("Please enter your name of");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.mgrName");

    E-MAIL MANAGER
    Else if (mgrEmail == "") then
    xfa.host.messageBox ("Please enter e-mail address of your manager");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.mgrEmail");

    HOURLY EMPLOYEES
    Else if (salariedHourly == "") then
    xfa.host.messageBox ("Please enter if you are salaried or hourly");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.salariedHourly");

    DIRECT SUBORDINATES
    ElseIf (directReports == "") then
    xfa.host.messageBox ("Please indicate if you have any direct report");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.directReports");

    PERFORMANCE RATING
    Else if (perfRating == "") then
    xfa.host.messageBox ("Please certify your last performance rating");
    xfa.host.setFocus ("xfa.form.form1.page1.subForm1.perfRating");

    HOW LONG WORK
    Else if (howLongWorking == "") then
    xfa.host.messageBox ("Please indicate how long you think that this scheme of work");
    xfa.host.setFocus ("xfa.form.form1.page1.questions.howLongWorking");

    on the other
    Button6.execEvent ("Click");
    Page2.presence = "visible";

    EndIf

    I have been hunting for several hours and can't seem to find or correct the problem. Can anyone help?

    Thank you

    MDawn

    It would be easier if I cpoudl see the form in action... .a you send it to [email protected] and include a description of how to reproduce the problem.

    Paul

  • Get the error message about the file cCNColms.dll missing at startup.

    I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

    Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

    Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

    Read these instructions carefully and see what you can find:

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding
    .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
    .  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • When you try to sihn on AOL I get the error message "missing file snmaster.idx please reinstall.

    can anuone tell me how to reinstall a file called snmaster.idx. Whenever I try to connect to AOL, I get an error message indicating that the file is missing.
    Thank you
    FPV

    Hello

    Visit this help link on AOL:

    You may receive the message "the file snmaster.idx is missing" during the installation of the AOL® software if some data
    the files are not installed in the correct location. Move these files to the correct location, this problem will be solved.
    http://help.channels.AOL.com/KJump.adp?articleid=223420

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Standard Adobe Acrobat 7.0 - error missing "resource files".

    Have just changed to a new workstation running Windows 7 (64-bit), while the old computer was running windows 7 (32 bit).

    A copy bought Adobe Acrobat 7.0 Standard and after much struggle Adobe support online was told the CS2 download site and I downloaded the file and opened and installed. However it does not work properly problems as follows:

    I noticed during installation it said unable to create a PDF printer (I have both 2016 Word and Word 2003 on the PC)- but now see main point below where this error message is given in detail...

    Have tried to use 'create PDF' to a word 2003 document as a PDF. Does not work as a pop-up window States:


    "Cannot find resource 'Adobe PDF' files.

    You want to run the installer in repair mode?

    I tried selecting Yes on this point-in which case crosses indicating that Windows is configure Adobe Acrobat 7.0 and that it's 'get information' while he receive the same error message on the printer, which, in its entirety, is as follows:


    WARNING 20225. Adobe Acrobat 7.0 Setup failed

    to create a new item: Adobe PDF Port / printer. The

    Adobe PDF printer may be unavailable.

    LastError Get: The operation completed successfully.

    If and then click [ok] - the only option... then restart and reopen Adobe Acrobat 7.0 Standard get the same error (cannot find resource 'Adobe PDF' files)

    Have also tried to do a right click on the program and select 'troubleshoot compatabiity '. It said it asked

    Windows compatibility mode: Windows XP (Service Pack 2)

    But make the same mistakes when trying this.

    As the program has worked on the old workstation that was running Windows 7.0 cannto work on why it won't work now.

    Help please!

    Nick H

    You might be able to patch up some problems, but you can't make it work properly on this system not supported. The Adobe PDF in Acrobat 7 printer driver is only for 32-bit systems. It is also required by the PDFMaker Office functions, which therefore cannot work.

  • Can someone help me with the error message "Creative Cloud Files folder missing"?

    Hello

    I'm on a Mac (OS X 10.10.1) and recently changed the folder name 'users' of my system to something else. I think that I followed all the steps correctly Apple to make sure that my user account name and the directory of the user are in alignment after the change. However, the creative cloud do not update the extension / address of the location to sync files. I went into the preferences of creative Cloud and saw the location of the file ' ' was still announcing the former name for the folder my Mac user. I used the dropdown to select 'Other' and then selected the folder of the newly appointed user. Creative application Cloud then began loading (presumably to restore the sync connection), but then gave me the same error again. When I return in Cloud creative preferences, the location of the file ' ' now shows the newly named good, user folder, but I still get the same error message every time I try to turn on sync. Even with the correct file shown as the 'file location', the error message always refers to the old extension / address of the location of the file.

    How can I get Creative cloud to update the address of the file? He seems to have accepted my change the 'location', but the address of the file itself has not been updated.

    FYI: clicking 'Restore' option does not at all help. It produces just the same pop-up over and over again until I got disabling sync.

    UPDATE: I restarted my computer and went through the same exact process above and now looks be it resolved itself. the error message no longer appears after that I have turn on sync. In my opinion, everything works fine now. Basically, it seems that the solution is to completely reboot your computer.

  • Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

    As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

     

    Hi rdoran,
    You perform the steps from the administrator account?

    To determine which files can be repaired by the System File Checker tool, follow these steps:
    Step 1:
     
    NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.

    For how, see the SFC analysis details in the CBS. JOURNAL:
     
    * Open an elevated command prompt.

    * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
     
    * Close the elevated command prompt.

    * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
     
    * You can safely delete the sfcdetails.txt file later if you wish.
    Reply back with the details in the log file.

    If it does not help to complete the scan, you can complete the steps below and check out them.

    You're able to boot in safe mode ?
     
    Step 2:
     
    For more information on how to log in to safe mode, see the following Microsoft article:
     
     
    If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
     
    Reference:
     
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Step 3:

    In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
     
    At the command prompt, type the following command and press ENTER:
     
    Chkdsk /r
     
    Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
     
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

    Original title: how to fix browseui.dll without original windows disc?

    Hello

    Well, kids, here's the deal.

    I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

    There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

    NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

    Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

    I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

    We are this:

    1. is there a way to correct this file without the disc?

    2. can I get another copy of the disk without having to buy it?

    3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

    If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

    If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

    Explorer.exe - bad Image
    The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

    You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

    If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

    Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

    You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

    Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

    From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

    Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

    You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

    Explorer.exe

    Click OK to launch the Explorer and your office must return.

    Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

    If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

    Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

    If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

    You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

    Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

Maybe you are looking for

  • remove history

    I use windows 8. In the HISTORY when I click on today + DELETE, nothing does. How can I remove a link?

  • In Ipod touch Apple id password

    Hello We got three units at home. A telephone I6s, IPod, and Mac. With the IPod, when you are prompted to insert the password of the Apple ID (which is the same in all 3 units), the password is not valid. Can anyone help? Thank you.

  • Unable to connect to a homegroup printer Win8

    My laptop has installed Win8Pro. It is impossible to connect to the homegroup printer - it locates the printer via Add a printer, but when I try to install this printer, I get the error message: Windows cannot connect to the printer. The server print

  • New PC with Windows 7 and a 'old' and apparently compatible, Canon scanner LIDE 90.

    New PC with Windows 7 and an 'old' Canon scanner LIDE 90.  Compatibility of Windows gives the all clear gun site, but I'm unable to operate as Twain cannot be opened "following all my attempts to load after several uninstalls. Whatever Windows compat

  • AIR 3.1.0.4 included in OS 2.0.0.4869, apps still does not

    Anyone had any luck getting the applications compiled with AIR 3.1 runs on the new OS? I have tried both a very basic with no native extension and a more complex with two native extensions - both fail to load properly. The debugger doesn't tell me so