Error message "network error occurred trying to read the file" xnafx30_redist.msi

I was download microsoft touch pack for windows 7 when I received the following message: "network error has occurred trying to read from the file c:/programdata\applicationcache\xnafx_30redist.msi" and the download stopped.  I have a hp touchsmart computer, running windows 7, sp1.  is there a conflict?  What can suggest you or will they still co-exist?  Thanks for any help for the beginner!



1. don't you make changes to the computer before the show?
2. which web browser is installed on the computer?

Method 1
I would say you can do clean start and then try to install XNA Framework. When you perform the clean boot, make sure that you disable all antivirus programs.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

Method 2
I suggest you to uninstall XNA Framework completely, and then download and install XNA framework from the following link. Once you install XNA Framework then Touchpack.

Tags: Windows

Similar Questions

  • A network error occurred trying to read the file c: WINDOWS\Installer\iTunes.msi

    I'm not able to go to iTunes or watch videos on my program Corel due to an error in Quick Time. It keeps telling me that I need to improve my Quick time and when I tried it wouldn't let me so I tried to remove it and couldn't because of an error and then I came here to get the Windows Cleanup utility and who eventually removed the program out of my control panel and I thought that would fix it but it didn't and now it gives me this message. What should I do now?

    This problem occurs in all applications in all environments such as Windows XP, Amiga and Windows 7. I have only my current computer with Windows 7 64 bit related to the problem. After following suggestions to cure the problem without success, I read the error message that displayed the MSI being read in C:\Windows\Installer. There is no such MSI placed in this directory. SO to solve the problem, you must put some Apple msi installation which gives the error message in the C:\Windows\Installer directory. Just drag it directly into the directory. Do not use any subdirectory. If your don't have a copy of the MSI, you can extract it from the EXE installer with a program like WinRar. My problem was with iTunes to bleed the system looked like this C:\Windows\Installer\iTunes64.msi. Run the MSI file or the original from Apple download. It worked for me as expected if you give it a try.

  • "Error 1316. A network error occurred trying to read the file C:\WINDOWS\Installer\kis.en.msi"

    Working for days trying to set up my latest software - appears to download from the site OK and runs through the entire installation to the right at the end, then shows code error above.

    I don't have any idea how to solve this problem - many attempts to find a solution/updated via Windows update site fail too miserably.

    Any suggestions gratefully received!

    Has taken a lot of time and a lot of past backward and forward over problem.  Finally I had to remove all the previous editions of the software and perform a clean installation of the new version.

    Now faced with W7 questions!  It will never end...

  • network 1316.A error error occurred trying to read the file: C:\windows\Installer\KAVKIS.msi

    Try to uninstall Kaspersky Anti-virus 2013.

    Hi William,.

    I understand that you get a 1316 error message when you try to uninstall Kaspersky Antivirus 2013.

    I suggest to refer to the following article and check if it helps.

    Installation/uninstallation of Kaspersky Anti-virus 2013 error: Error 1316. Impossible to install the application

    Activation error. Activation procedure returned an error 1316

    If the problem persists, I suggest you to contact Kaspersky support.

    For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • BlackBerry smartphones "an error occurred trying to read the media.» (Videos/YouTube) (WiFi)


    I have a Storm 2, YouTube and videos work fine and dandy, and then yesterday suddenly YouTube stopped working. I would like to click on a video, he strives to buffer for 30 seconds, then said "an error occurred trying to read the media.» I tried to do the thing optimization YouTube, check again. I thought that maybe it wasn't the internet bad connection, since we were our friends, but he came home today, same thing happens.

    Also today I tried to record a video, and when I finished recording and tried to play, same error. I have connected my BB to my PC and played, played very well. The video is in 3GP format.

    The storm 2 is from Verizon, but it is unlocked and I am with Bell. I have not given or the internet with bell is throughout the WiFi.

    Halp meh please.

    Still, first, reboot the device...

    With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

    Now, try again your video playback.

  • Get a fixed image and audio while playing a movie in Windows Media Player, also get the message: "network is too busy to read the file to its original quality.

    Original title: Windows Media Player

    When I go to play a movie using windows MediaPlayer all I get is an imagwe again with audio and this message 'network is too busy to read the file to its original quality. Also, all my other media playing programs read the video but are rather "lag". I think the problem is that I already used a program to download torrents called 'BitTorent' and maybe this has used up all my bandwidth or processing speed? Not really sure but would really like it if I could still use WMP and I'm looking for resolution to my problem?

    Thank you

    Hi Jeremy,.

    It seems that you have problems with playback of video files in Windows Media Player.

    1. what operating system do you use?
    2. this happens with all the videos?

    If you use Windows 7, here are a few troubleshooting steps that you can try.

    Method 1: Try to run the troubleshooting Windows Media Player settings Troubleshooter:

    Method 2: If the problem persists, try to disable and enable Media Player and check.

    Step 1: turn off Windows Media Player:
    a. go initially and in search type 'Turn Windows has or not'.
    b. click on "Turn Windows features on or off".
    c. find multimedia and uncheck Windows Media Player.
    d. restart the computer.
    Step 2: Enable the Windows Media Player:
    a. go initially and in search type 'Turn Windows has or not'.
    b. click on "Turn Windows features on or off".
    c. find the multimedia functions and place a check mark in front of the Windows Media Player.
    d. restart the computer.

    For more information, see the article:

    Method 3: Try to re register the wmp.dll file and check if it helps.

    a. log on as an administrator.
    b. click Start, type cmd in the text box Search , right-click on cmd.exe, click run as administratorand then click continue.
    c. at the command prompt, type regsvr32 wmp.dll, and then click OK.

    I hope this helps!

  • Hard drive erased, now receive the error occurred trying to read the boot configuration

    I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read the boot configuration, I tried to use the windows vista download recovery disc but when I turned on my computer nothing the same thing appeard. HELP PLEASE!

    * original title - I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read start configuration.*

    Here's how to use the Vista startup repair disk. is NOT a Vista reinstall disk.

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    ISO Burner:

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.


    How to reinstall Vista:

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.


    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.


    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.


    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    MS advice on the conduct of clean install.

    A tutorial on the use of a clean install

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error1316.A network error occurred trying to read from the Visual Studio 2010 Tools for Office Runtime (x 86) fileMicrosoft \vstor40_x86.msi

    while trying to uninstall Microsoft visual studio 2010 Tools for office Runtime(x86) of the Control Panel, it is showing an error as [Error1316.A network error occurred trying to read the file "C:\Program Files\Common Files\Microsoft Shared\VSTO\10.0\Microsoft Visual Studio 2010 Tools for Office Runtime(x86) \vstor40_x86.msi"] but the physical location of the file exists.

    Hi Haran,

    The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  • LabVIEW 2013: An error occurred trying to load the assembly

    Hey all,.

    I'm trying to load a dll .NET 4.5 in LabVIEW 2013.

    When I place one of the screws .NET and try to select the one I am after it says "an error occurred trying to load the assembly" and will not let me load it.

    I also tried to import the dll, but who also gave errors.

    It's defintely a 4.5 as the reflector .NET .NET dll gives me

    [assembly: ComVisible (false)] [assembly: TargetFramework(".)] NETFramework, Version = v4.5 ", FrameworkDisplayName =".NET Framework 4.5 ")] [Assembly: SecurityRules (SecurityRuleSet.Level1)] [assembly: SecurityPermission (SecurityAction.RequestMinimum, SkipVerification = true)] '"

    To try to work around the issue of the import, I added the following to my LabVIEW.exe.config file


    but it made no difference.

    Any suggestions? All the things I've read so far are for 2010.


    I installed a 64-bit version of LabVIEW and it works. HUZZAH!

  • an error occurred trying to rename a file in the destination directory code 5

    When I try the installed software on this time its error getting
    ; an error occurred trying to rename a file in the destination directory code 5

    Hi Sissi,

    1. What is the full error message do you get?

    2. This only happens when you try to install a particular program?

    3. using the administrator account?

    Step 1:

    You can try to take ownership of the file or the folder and check.

    How to capture a file or a folder in Windows

    Step 2:

    I also suggest you temporarily disable the antivirus software third and firewall on the computer and check to see if that fixes the problem.

    If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

    Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  • an error occurred trying to access the service

    I wonder why I bought a year subscription to Adobe Reader to convert PDF files to Doc files, when it WORKS and no one seems to be able to help me! I'm on a Mac Book Pro with Yosemite (do not upgrade it slows down your Mac evil) and whenever I try to convert a pdf file to a doc I get "an error has occurred while trying to access the service", can someone help me please?

    Hi Cedric,

    The customer service number is 800833687

    Is the direct link to chat:

    You must click on 'Still need help' to start the chat session.

    You get this error: "year error occurred trying to access the service", all trying to access the service by the reader.

    Try to use the link: log in with your Adobe ID and try to convert a pdf file to doc and check if it works for you.



  • An error occurred applying attributes to the file. Access is denied?


    I use Windows 7. I reinstall my Windows 7 and since then, most of my file become encrypted (Green shows in Explorer).

    I came across a strange behavior where I am not able to use or to decrypt files. I dint knew the encryption.

    I am the administrator on my computer running Windows 7. I get the following error
    An error occurred applying attributes to the file.

    Access is denied.

    I have no key encryption nor do I created everything.

    I tried the following:
    When I right click on the file > properties > go to advance > uncheck the encryption > apply changes > continue (user account control) > I get this...

    "An error occurred applying attributes to the file:

    C:\Program Files\Windows Collaboration

    Access is denied.

    Ignore. Ignore everything. Try again. Cancel. »

    It is a small very annoying problem that I need to have go further, any help would be appreciated!

    Points to note:

    Safe MODE does not help.
    I am logged on as administrator, what makes it more frustrating.

    I do not know of the all other folders that Act up like this.

    Please let me know what happens! THESE FILES ARE VERY IMPORTANT


    1. what security software is installed on the computer?

    2. what version of windows 7 is installed on the computer?

    3. of what exact file you try to remove the encryption?

    4. have you installed windows on the C partition or another partition?

    Method 1.

    To resolve this issue, give the system security principal of full control on the System Volume Information folder.

    NOTE: The System Volume Information folder is a hidden operating system folder. To display the folder in Windows Explorer, follow these steps:

    1. in the Tools menu, click Folder Options.

    2. on the view tab, clear the Hide protected operating system files check box.

    Follow the steps in this article and give full control permission to the folder. Appropriating a file or a folder:

    Method 2.

    I would like to create a new user account and check if the problem still persists.

    Create a user account:

    If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

    Difficulty a user profile is corrupted:

    Method 3.

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner:

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    For more information: the file must be decrypted by the user who encrypted the file. The files are encrypted using the Encrypting File System (EFS) are accessible only to the person who encrypted the file, regardless of the other permissions on the file.

    I suggest you to visit these links for more information:

    I hope this helps.

  • Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good


    In Event Viewer, I see a lot of mistakes like:

    Source: The customers DNS events

    There was an error trying to read the local hosts file.

    I read that threat indicating to rename the hosts for "hosts" file

    HOWEVER, the name of the file in my computer appears as it should

    C:/Windows/System32/drivers/etc / "hosts".

    and the content of the file is as it is supposed to be according to:

    What should I do to fix this error?

    P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

    Thank you


    Try to re-create the hosts file.

    Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it: localhost

    : 1 localhost

    The '1' in the '' must be in the first column of the line and there must be at least one space between "" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

    Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.


    You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  • Error 1316: a network error has occurred trying to read the C:/windows/installer/Setup.msi__trying file for uninstall Manager communication at & t

    uninstallation of at & t communication manager

    Read the above.

    See you soon.

    Mick Murphy - Microsoft partner

  • an error occurred trying to access the battery

    When I do a check of the battery, it shows that the battery is chrgead a 100% but I get the message "an error has been encountered tryinng to access the battery" brahma101

    Also when I do an análisis of the health, the update of the internet does not work although I am online!

    Hi Brahma

    You can create a detailed report on the State of the battery to double check the battery status.

    1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.

    2 in the command prompt window, copy / paste the following command.

    powercfg-energy-output %userprofile%\desktop\energy-report.html

    Press ENTER.

    This create a file named energy - report.html and place it on your desktop.

    3 go to your desktop and double-click the file to open.

    Scroll to the bottom for the battery: battery information section.

    You will see:

    Rated xxxxx

    Xxxxx full last Charge

    (Where xxxxx is a number)

    Copy this article and paste in an answer here, for analysis.


Maybe you are looking for