Error message on HP xw6400 workstation start-up

Similar Questions

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• I get Themida error message when I try to start copytrans

  I get the Themida error message when I try to start copytrans, what can I do?

  Hi P1961,.

  Try to install the clean boot and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps described in step 7.

  Hope this information helps.

• An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk".

  Hi all

  An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.

  I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,

  Although I installed file encryption software.

  This could be a virus? and how to prevent this error message appear on my computer.

  Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.

• Trying to access C: I get various error messages. I tried to start with windows 7 Home premium safe mode

  I have several hard drives in my computer. Local disk C: is not available. Disks hard D; E; F; and G work without problem.                             Trying to access C: I get various error messages. I tried to start in safe mode, also tried to use the administrator user and still no luck.

  At some point, I'll get one of the following messages

  My computer ran fine until a week ago. I have I think some how disable the administrator account and disabled drive C:

  (1) error 0 event log x 081000202.

  (2) temporary files for users: (Sean-pc) are limited.

  (3) I need the net administrator authorization.

  (4) C: not available Windows\system32\config.cmd.exe

  Hello

  Problems with the drive in Windows may result from permissions problems, or even corrupt corrupted user accounts.

  1. What is the exact error message you get when accessing drive C?

  Method 1: I suggest you to activate the default Administrator hidden on the computer account and check if it helps.

  Try to activate the built-in Administrator account, follow these steps:

  a. Click Start and type cmd in the box start the search.
  b. in the list of search results, right click Guest and then click Run as administrator.
  c. When you are prompted by user account control, click on continue.
  d. at the command prompt, type net user administrator / Active: Yes and then press ENTER.
  e. type net user administrator , and then press ENTER.
  f. Type exit and press ENTER.
  g. disconnect from the current user account.

  Method 2: Try to take ownership of the drive and check to see if the same problem happens.

  a. right click on the drive and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  "Access denied" or other errors in the access to or work with files and folders in Windows: http://support.microsoft.com/kb/2623670

  Method 3: Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Out of nowhere I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  Hi Kingsberry and almathof,

  Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update

  Thank you

  Regalo

• I get an error message, "there is a problem starting C:Users\ (my name!) \Appdata\local\temp\uacavi,dll ".

  Hello

  whenever I start my pc, I get this error message:

  There is a problem starting C:Users\ (my name!) \Appdata\local\temp\uacavi,dll

  I recently purchased RegCure Pro for fix my registry and its still not fixig the problem.

  Help, please

  Original title error message.

  Thank you

  Well, you shouldn't have wasted your money on a registry cleaner - they are dangerous to use if you don't know what exactly is the cleaning of your registry - and if it is safe to remove the discovered or not registry keys.

  OK, so just fix it-

  Press Windows key + R > type msconfig in the box run > Enter. In the System Configuration window, select the Startup tab.

  Now, uncheck an entry > OK and restart. If the error message is gone, leave it as it is. If the error message still appears, open System Configuration > start again tab. Now check the entry you previously unchecked and uncheck another. You do this to know what entry causes the error.

  Make work easier, you should not try unchecking and check all entries beginning with the following words in their names.

  Microsoft, Adobe, Intel, (your company produces antivirus developer), Java, Synaptics and (the manufacturer of your computer - HP, Dell, Sony, MSI or anything else).

• I get an error message at the beginning: "Problem starting C:\Program Data\IntelBackup Online.dll"

  Original title: I get an error message at the beginning upward:

  "Problem starting C:\Program Data\IntelBackup Online.dll" under this line, it is said: 'the Spicific mode is not found' how can I fix?

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  Follow these steps and check if that helps.

  Step 1:

  Check if you have the similar problem with safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if that helps:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

• Can't share files and printers on the network. Error message: Server service is not started.

  I CAN'T DO FILE/PRINTER SHARING.

  I GET a MESSAGE SHOW "SERVER SERVICE NOT STARTED" I ALSO TRIED WINDOWS HELP AND IT SAYS HELP AND SUPPORT NOT START. HOW CAN I GET THESE TO START AUTOMATIC

  What version of Windows, including the service pack is installed? (Do right click my computer and select Properties, if you do not know)

  The method 1 and method 2 in this article--> http://support.microsoft.com/kb/885859

  If you're in the Services applet according to method 1, also make sure that the Startup Type is set to automatic (to resolve, double-click the entry in the Services; Startup type is under the general tab).

  You can also start Help and Support by using the Services applet (its Startup Type can be manual or automatic).

  If you receive error messages when you try to follow the steps above, report completely, without paraphrasing.

  The fact that two fairly common services do not work can mean that something more sinister is happening.  What antivirus application do you use?  What's his current subscription?  Its subscription has already been authorized expiration?

  You can download, install, update and run MalwareBytes AntiMalware (it of free and can be removed later if you wish).

• Error message: the application failed to start because its side-by-side configuration is incorrect please view log for details application event

  Original title: cannot open programs

  I get this message when I try to run any program on my windows vista operating system: the application failed to start because its side-by-side configuration is incorrect please view log events applications for more details. I can't open any programs or files associated with programs IE Miicrosoft Office), any help would be sufficient. Please make your suggestions VERY user-friendly. Thanks in advance.

  Hi KenKenJr,

  1. are you faced with questions only when you open Microsoft Office programs?

  This error can occur because of a corrupted Microsoft Visual c++ installation.

  Step 1:

  If this error occurs only when you try to open the Office programs, you can check the following link and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Step 2:

  To resolve this problem, you can also install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• C310a - I can't stop all the HP error message pop up when I start my computer

  Lately and since the fitting (authentic replacement) cartridges, the error messages - jam paper, cartridge problem paper loading, insist on popping up over and over again, even if I click on the relevant Red Cross to close.

  I tried the * beep * and on this forum for a solution.  I found the one nearest asked that the printer had to be checked for stray pieces of paper or other debris which would cause these messages to appear.  Apparently, they are all related to this type of error.

  I checked the printer including the duplex unit, but found no debris, lint or other debris.  I have downloaded and run the Diagnostic tool but still once, found nothing untoward.

  I'm happy the printer works fine, (it prints, copies and scans perfectly fine).

  I have to reset anything?  If so, how?  Or can someone tell me what I may need to do to solve the problem?

  Thank you very much

  Alright. I think it's safe to say that it is a software issue and not a hardware problem. So reinstall software has to deal with the problem.

  Click Start Menu > all programs > HP > HP Photosmart C310 Seris > uninstall to uninstall the software. Download the latest software and drivers for your printer using the link below, then run it to install the software again. This should solve the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-85745-1&cc=us&DLC=en&LC=en&OS=4063&product=4231205&sw_lang=

• Vista Home Premium to ultimate problem, after reloading the system. Error message: the upgrade cannot be started. To upgrade, cancel Setup, and then choose to upgrade to a version of Windows...

  I recently had my computer HP reloaded due to hardware failure by Fry technicians.  They have reloaded it back to Home Premium, due to the fact that the initial charge.  I had already updated using a copy legal DVD Ultimate.  Now when I try to update it gives me the message above.  ALSO, when I check the GUI HP, it says my warranty expired 5/02 - OMG, I bought the computer 2/2007.  At they recharge an OLD picture or something?  HOW to solve this upgrade to Ultimate.  I don't want to throw away $150.

  You've never given the full error message.

  So, we have to guess that it is she:

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And your warranty with HP, Microsoft no issues.

  See you soon.

  Mick Murphy - Microsoft partner

• error messages every time that I start

  Shortly after starting my new computer Win7 I get two error messages whenever I start. The computer seems to work very well, but it's annoying to see them and maybe somethings wrong that needs to be fixed. Any help will be appreciated. The messages are:

  Windows - Application error

  The instruction at 0 x 00424999 referenced memory at 0x00000000. The memory could not be read.

  IMGSTART. EXE - Not found entry Point

  The procedure entry point GetFileVersionInfoSizeA be found in the library of dynamic links VERSION.dll.

  Thanks for your help.

  Fred

  In msconfig, disable all startups, reboot, accepting the warning. Any error starting message now?

  If no err, msconfig, select a batch of startups, restart.

  Continue this process until you identify the start-up, the origin of the problem

• error message: sysdoc32.exe failed to start because 532stat.dll was not found

  I have no idea what to do about this error message: "sysdoc32.exe could start because stat.dll 532 not found."  I'm not very computer.  All I know is that I had to do a system recovery because the screen kept freezing, and often Internet Explorer has stopped.  I ran all the scans for viruses, etc. and no problem there.  So, what I do about the error message?  Can someone guide me through the process very carefully and in detail?

  Thanks advance!

  You run to the recovery of the system using Hp Recovery Manager?