Error message on Windows 2003 and Satellite M40x-184

Similar Questions

• Windows XP and Satellite M40X - programs are broken

  Hi, I recently bought the Germany satellite m40x. Windows was in German so after coming back to India, I tried to install the version of the University a license of Windows XP on it.

  I tried several versions of windows with or without service pack, but the problem that remains with many applications like Yahoo! Messenger 7 and Nero Start Smart and the age of empires and many others... the programs crash. I am not able to understand the reason behind this. With the Windows German, all the programs worked.

  After installation, the program works, but after the computer restarts, it starts in error. Some older messenger versions work, but no version of nero does not work.

  Please help me... Thank you

  [Edited by: admin August 17 05 17:43]

  Hello

  In my opinion, you can find on the internet.
  -Acrobat reader can be downloaded from the internet.
  -DLA and recording is now installed on the original image.
  Java runtime environment 2 - Dim V1.5.0 you can also find on the net and install separately

  I hope that in Device Manager all hardware components are installed correctly.
  What you mean with the same error? Can you be more clear about this?

• Windows 2003 and Satellite M45-S335

  Hello
  I bought a toshiba a few months ago, I want to know if windows 2003 is now supported on this subject? I once installed, but I had a problem of drivers, the improvements are there in this?

  Thank you very much
  Bilal.

  Hello Bilal

  As much as I know XP units don't are not supported to W2003. For W2000 maybe but I have heard that with W2003 is not so easy to configure the device perfectly. Try to find out material manufacturers have some drivers on its support page.

• Error message starting Windows "username and password do not match."

  The message is, "Usernam and password do not match."  I want to delete this message permanently. How can I do?

  * original title - I keep getting a Message on StatrUp.*

  Hello

  1. are you able to connect?

  I suggest to start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If not, then my brother this link and check if this may help:

  http://support.Microsoft.com/kb/189126

  It will be useful.

• Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close

  original title: problems of files

  Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close.

  Sometimes, the problem is caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find more easy to disable them all and then reactivate (green area) one at a time and Explorer of execution until the culprit is found.

• Active Directory and domain controller on old customer Windows 2003 and Windows 7.

  Hi all

  I have Active Directory and the domain on old Windows 2003 and Windows 7 client controller. I enabled "User must change password at the next logon" for the customer user on AD account.

  When the user tried to connect to Windows 7, after that they have got the change password screen and type new password, then they received message "the user password must be changed before logging on the first time," user get password screen change again, then they get the same massage. Looks like he's going to loop and user cannot change password and connect to the computer.

  Hello

  To help you with your concerns, you can see the article below:

  Error message: the password must be changed before logging on the first time

  Let us know how it goes.

• I get the error message, the Windows Installer Service could not be found, is there a solution?

  I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

  Always, always, first specify what operating system you are using before you begin to explain the problem.

  Try this tutorial. It works for Vista and Win 7.

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

• I get an error message that Windows can not find a certificate when I try to use my Verizon's MiFI Jetback.

  I have a Verizon Mi - Fi Jetpack.

  I have a Verizon MI-Fi's Jetpack.  It works fine on my Windows 7 computer, but on this computer (Windows XP with Service Pack 3), I get an error message that Windows can not find a certificate.  It won't let me connect even if it shows excellent signal, etc.  Need help.  Thank you

  Hello

  1. when exactly you get this error message?

  2. What is the model of the unit?

  Check if the device is compatible with Windows XP by referring to the user's manual.

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• You met 800C2F19 error message using Windows Media Player.

  I use XP with service Pack 3 on it. I get the message you met 800C2F19 error message using Windows Media Player. More information are not currently available for this error.  I am trying to download the OverDrive Media Console software

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. what version of Windows media player do you use?

  3. when exactly you get this error message?

  I suggest you Uninstall and reinstall the latest version of Windows media player and check if that helps.

  Windows Media Player 11 for Windows XP: http://www.microsoft.com/download/en/details.aspx?id=8163

  Hope this information is useful.

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• error message; C:\Windows\System32/igfxres.dll

  Hi, I keep getting this error message c:\Windows/system32\igfxres.dll is not designed to run on windows or it contains an error.

  I am running windows vista Home premium. Can someone please help?

  The file belongs to your Intel video drivers. Install the latest version. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• I have three problems___the is first I get the error messages form I mesh and cannot access my profile or friends list ' ___Microsoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  I get the error messages form I mesh and cannot access my profile or friends list '

  MIicrosoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  For iMesh, you can go here...

  http://www.iMesh.com/community.html

  I don't understand the other two problems that you encounter.  If you please would explain what they are and what, if any, error messages that you receive.  Also, what antivirus do you use, and you run Windows XP SP3?

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• When I try to install my software, I get an error message that "Windows Installer could not be accessed".

  Issue of Windows install

  I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?

  Thank you, Jeanne Vecere

  You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.

  IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.

• Windows Media Player cannot burn CD - R music. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.

  Can't burn music CD - R. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.  What is an easy way to find and fix this? I know little about the links and need a simple way to fix... Thank you!

  Hello

  You got the C00D10BA error message when you use Windows Media Player. The following information
  might help you solve the problem.
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5260&ID=C00D10BA&ContextId=89&OriginalID=C00D10BA

  Don't forget to click on the four " + " to see more help.

  Support for Windows Media Player
  http://support.Microsoft.com/ph/7763

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• error message from Windows media player C00D0FEA

  What is the error message from windows media player C00D0FEA and how to fix it?

  Hi blaque007,

  (1) when exactly you get this error message?

  (2) since when are you facing this problem?

  Please quote the complete error message you receive.

  C00D0FEA: this error may have been triggered by an error in another program or a component of Windows.

  See the link below

  C00D0FEA

  Method 1: You can check the link below that relates to a similar question

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/1bb18155-1614-4ad6-9e78-90bcd08deb0a

  You can see the link below for more information:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.