error message: "Please insert a disc into drive DVD D."

Similar Questions

• Error USB "Please insert a disc into drive F".

  I tried to change the drive letter from device in disk management, but it still does not work... I really need to recover the files on this USB... Help, please

  Hello

  Sounds like you have a problematic usb device, have you tried to go to Device Manager and look for the status of the usb you connected? It has a yellow sign? try to use the usb key in a different system, if it fails, you will need to go and download a 3rd party software and format your USB drive and then try to use recovery software in this case your usb will work but the files have 50 / 50 percent chances of recovering.

  Thank you

  Nitin Aswani

• "Please insert a disc into drive I" error message problem. Help, please!

  I get the error message "Please insert a disc in the drive I" when I try to attach a drive external hard (in a case of hard disk) via a USB 2.0 to my Dell Dimension 8400 computer. I am running Windows XP Prorfessional.

  When I attach an external hard drive that comes with its own enclosure as a Western Digital MyBook via the same cable USB 2.0 the following happens. Windows Explorer shows the new disks I and J. If I try to open the drive I have, I get the "Please insert a disc into drive I"message.» However, when I try to open the drive J I'm able to do it and see the files, in this case, the Western Digital MyBook. I can also open these files.

  I searched the Internet for solutions to this problem. In some cases, the problem can be solved by renaming the drive letter, but this does not work in my case. Most of the sites I visited fail to provide a solution. Very many missions I've read on various sites, the problem seems to be related to error messages has Microsoft Windows. The solution would seem to have to disable this / these messages by changing the relevant parts of the registry. (See: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/logonuiexe-no-disk-there-is-no-disk-in-the-drive/7a158e14-6a56-4bfd-b1b5-796c3ccea3b0?page=2&tm=1341781513552, http://www.w7forums.com/please-insert-disc-into-drive-error-t11264p2.html, http://support.microsoft.com/kb/281345)

  Unfortunately, the information that I found are too vague and contradictory to me. Microsoft seems to suggest changing the value of ErrorMode in CurrentControlSet so that the user gets more no error message 'hard' (modification of the: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows\ErrorMode value = 2). However, this suggestion for the backup of SQL Server databases. It also seems a bit drastic to turn off hardware error messages. In another post the suggestion is to delete upper and lower filters in the section of the registry that controls the hard drive. The problem here is that you may have to reload the software. Also, I'm afraid I'll mess up the registry.

  I would be grateful to anyone who could tell me what parts of the need to register to edit and how to disable this message ' Please insert a disc in the drive I have. "

  I suspect that the boxes of hard drive that does not open professional XP are somehow corrupt. Unfortunately, the error message keeps me from use any diagnostic software to examine the hard drives in these speakers. In this regard, I would be grateful to anyone who might suggest a diagnosis good freeware hard drive.

  I thank the members of the forum for their help in advance.

  I really appreciate all help members can give me.

  1, the diagnostic software that youre looking for WDC, is a MS-DOS

  utility. Download from WDC, installed on an MS-DOS formatted disk, pc boot

  on disk, it automatically runs... With respect to the current problem, try to go to run, type:

  diskmgmt.msc

  MSC, locate the hd, L.click on this subject, go to actions, all, select 'enable ',.

  close the msc...

  You can also, type: cmd in run, type cmd: DiskPart in DiskPart, type:

  The type of disk list: list volume type: HELP for cmds all the...

• DVD player does not recognize disk ERROR "Please insert a disc into drive F".

  Any disk I put in DVD Player my cell phone, he won't play. If I go to the file in Windows Explorer and click on DVD RW drive (f :)), it ejects all that is currently in the player, saying: "Please insert a disc into drive F:." My computer is a Lenovo 4334 of model and model number HuronRiver_CRB. It runs on Windows 7. Can anyone help?

  Try: https://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

• floppy drive please insert a disc into drive error message A

  I TRIED 2 NEW FLOPPY DRIVES, AND EACH OF THEM GIVES AN ERROR MESSAGE THAT SAYS: S ' PLEASE INSERT A DISC IN THE DRIVE A.I DID A LOT OF CONTROLS AND I TRIED A LOT OF THINGS TO DO FLOPPY WORK.IT SAYS IN DEVICE MANAGER THAT THIS DEVICE IS WORKING PROPERLY. CABLES ARE NOT GOOD, OR IS IT A PROBLEM WITH XP? ARE MY BACKWORD CABLES, OR THE TWO DISCS ARE DEFECTIVE? IT WILL NOT READ OR WRITE. WHAT CAN I DO ELSE? IT SHOWS ON MY COMPUTER WHERE IT EXISTS AS A PLAYER A. I CAN FORGET ABOUT FLOPPY DRIVES IF I CAN'T GET AN ANSWER TO THIS PROBLEM. I ALSO READ THAT IT IS NORMAL FOR THE FLOPPY DRIVE, DO NOT SHOW ON THE SCREEN OF DISK MANAGEMENT. ANY HELP WOULD BE APRECIATED. - THANKS.

  Hello

  Exactly what you do when you get the message "Please insert a disk in drive A;

  Your cables might be backward. Some cables I've seen can be connected backwards, but normally there is a lack of female pin and/or a physical bar that stops you place the cable correctly. In case of doubt, all cables (that I saw) have an edge that is color which is the limit where pin 1 is. Your motherboard and the floppy drive (s) should also indicate what is pin 1 (sometimes with the number 1) or sometimes by an arrowhead. In addition, the end of the cable with the twist must be connected on the floppy drive.

  As you have obviously been disconnecting and reconnecting the cable, you should check for twisted on the Board and the drive pins.

  The device does not show in disk management, but should appear in the Device Manager.

  Don't you hear the drive trying to search the diskette?

  Are your formatted diskettes?

  Have you tried a new pre-formatted floppy?

  I do not recommend people to use diskettes these days. The reasons include

  • reliability
  • capacity
  • convenience

  Also, although I did not buy the disks for centuries, I wouldn't be surprised to see that memory sticks are cheaper than a box of diskettes and hold much more data.

  I would say get a memory stick and use it instead of floppy disks.

  Tricky

• There is no disk in the drive. Please insert a disk into drive F:.

  I use Windows 10.  I have several times the Question "Please insert a disc into drive F:. After one of the updated Windows Update, the problem disappeared for a few days. It is now again. Please do not ask what is obvious. There is no such disk to be inserted. I saw this virus in 2012. It is directly linked to Adobe. Especially at the start, Ps and Acrobat reader.

  On a previous occasion when I had the problem, Windows (10) forced me to update. The problem disappeared.

  Earlier I asked Windows Update, 2 minutes later the computer booted. The problem disappeared. I checked Acrobat, most boring, no problem. I have only checked Ps no problem. How long it will stay like that, I don't know. I can't MY DOCUMENTS, PICTURES, MUSIC some time yet. So, I'm not able to do anything with or for them. It will tell just me "Unauthorized" or something in that line.

  I appreciate your help.

• Even after inserting a disc in the CD/DVD drive, my computer asks once again for a disc in the drive. "Please insert a disk into drive E".

  All of a sudden my computer asks 'for a disc in the drive. Please insert a disk into drive E ". I put an and closed several times and it says all right, then it is said again and again the same message. ?? Help

  Original title: disc E

  Hello

  Thanks a lot for posting your request on this forum. You have reached the right place, and I'll do my best to help you with this question.

  It would be awesome if you can explain this problem with greater clarity. Please provide the following information to help you better with this problem.

  (1) Windows operating system you are using on the computer?

  (2) what exactly you are trying to do on the computer? You try to install games and Applications using the installation CD/DVD?

  (3) what is the exact full error message you get?

  (4) when exactly you get this error message? It's when you try to start the computer?

  (5) are you can play any CD/DVD using the CD/DVD drive on the computer?

  (6) what are the recent changes that you made to your computer before this problem?

  Please get back to us with all the relevant information about this question for assistance. You can see the article below, so that it would be helpful for you to include all the required information.

  Suggestions for a question on the help forums

  Hope it will be useful.

• Acrobat.exe - no disc. There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR1.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".
  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".

  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I had the same error today and found the answer to my question.  Acrobat attempts to retrieve a file on a removable disk, which is no longer present.  In my case, it's an SD card.  I reinserted the card in the reader and acrobat then asked if I wanted to recover the file, to which I said no. Acrobat no longer shows the message at startup.

• Starting problems, get the error "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1.

  1st problem: yesterday I started getting a popp window with the text following formulation - "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1' I have no idea what this introduced him or how stop it.  Any suggestions?

  2nd problem: whenever I restart my computer or shut it down and then power up the white bar that moves from left to right only moving to halfway through and then stops. I then have to hold the power button in until the computer turns off again and then rehit the power button. When it starts to power back up the white bar is always in the Middle, but then begins to finally complete the passage to the far right of the box. This problem started when I loaded the software for my printer Canon MX870 new that I bought and installed in October 2010 and has been done since then. I removed and reloaded the software of the printer on three different occasions but the problem persists.

  Hi frankb911,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/there-is-no-disk-in-the-drive-please-insert-a-disk/b9a130b2-4261-4385-a51f-28005f209a1d

  I hope this helps!

• Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K

  Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K. I won't record anything. It keeps popping up when I want to stop and he let me close. And it won't go away. I tried the Task Manager, and who is unable to complete the task. I went to his file and tried to delete, but it's not going to get out me of my PC

  Hello

  1. what version of operating system you are using?
  2. did you of recent changes on your system prior to this problem?
  3. when, exactly, you get this error message?

  You can try the steps mentioned below and check if it helps to solve the problem.

  Method 1: Scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 2: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 3: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Repeat the mistake of Photoscreensaver.scr: "there is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I've looked everywhere to find a solution to this problem, but it will not go away.  the message I get is

  "There is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I have only one hard drive installed, my C drive with a partition D of the spirit of the original plant. I would be very grateful is some has a fix for this!

  Hello

  This can happen if you have conencted some disk of the machine that has pictures and you have set up the photos in the screen saver.

  You can try to change the photo screensaver can access the registry path if it exists.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_CURRENT_USER\Software\Microsoft\Windows Gallery\Slideshow\Screensaver photo

  c. If the screen saver is mentioned in the settings, then on the right you will see "FolderPath".

  (d) the entry for folderpath should be C:\Users\Public\Pictures\Sample pictures

  e. If isn't changing for the above entry.

  f. exit the registry editor, restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Attempt of burning DVDs and receive message please insert a disk in drive E:, what I've done.

  I am trying to burn a DVD and I get the message "Please insert a disk in drive E:," what I've done.

  Hi mguttman,

  It is possible that you may need to date/reinstall the driver for your CDROM.  If you access the website of the manufacturer of your computer, you should be able to download for free here.

  In addition, please see the link for more information troubleshooting below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  Hello

  Please visit the following link to download: -.

  Download Creative Suite 6 applications

• error message please insert a blank disc into CD Drive (E :). when burning using WMP 11 in XP

  Original title: error message

  Please help someone

  OK, I tried everthing, I use windows xp

  Last week I updated my windows media player and now I have WMP 11 (sucks). Before I did the new update I could burn c.ds very well. But now I get an error message saying: Please insert a blank disc into CD Drive (E :). Once WMP detects a new disc, it will start automatically hot. I tried so many new CD I stop purchase. So I wait a minute until I see it have detected a blank cd (on the left it shows blank disc then try again, but I can't burn data or audio discs.) I try a few things about fixing the problem as uninstall WMP 11 but it is still on my computer - could someone help me.

  Thanks for the reply

  But who doesn't have everything he has told me that I didn't have a cd/dvd was not able when just before I installed the update WMP 11 he burned cds very well helped. Is there a way I can reinstall my old version?

  ===============================
  The following freeware can be worth a try:

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP / Vista / 7)

  Download CDBurnerXP
  http://CDBurnerXP.se/download.php

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Error - Please insert a disc into the drive trying to open & H R Block at home software CD.

  Original title: XP will not launch my H & R Block at home software CD.

  I bought the & H R Block at home tax software to target and Windows XP will not launch the CD in a CD/DVD players.  I tried manually running the software, but whenever I get the response "Please insert a disk in the drive", even if the disk is in the drive.  I tried other CD and they work all including the H & R Block CD provided in the mail.  Any suggestions for ways I can manually launch the CD ROM?  I returned to the store and exchanged, and the second CD did the same thing.

  Hi AALLIS,

  You did it all change hardware or software on your machine before this problem?

  You can follow this link & check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.

  Please post back and we do know.