error message printer 7510, 'Impossible to communicate with the printer' I can't print from my desktop, laptop
7510 HP e-All-in-one-C311a printer, Windows Vista, giving following error message when I try to print from my counter top "Unable to communicate with printer" also portable print request print not and my iphone does not find the printer.
has run the wireless network, no problem not detected test results
the status of the printer report, network status: ready, connection type: wireless
has run HP page configuration, all good here
Thanks for your reply, I read one number of other questioned posted here, and numerious corrections was to unplug the router, so I tried and it fixed the problem... once again thank you for taking the time and answer my question.
Jimmie
Tags: HP Printers
Similar Questions
-
I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?
Thank you
Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver. It may have been a conflict of name or something.
Concerning
Adrian
-
Whenever I open my computer, I received a message that says 'Error when unpacking program, Code 2, please contact the author'. It slows me down using my computer and I really have no idea what it is. I did research in the internet which causes some possible for this error message and I think it's regarding my Windows Update I must have clicked on last week. Help, please! I really want this message to go.
Thank you.
Hi KrystleRivera,
· Did you the latest changes on the computer before this problem?
· When the question began?
· What version of the operating system is installed on the computer?
I suggest you follow these methods.
Method 1: Start the computer in safe mode with network and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.
Method 2: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Reference: http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance
-
Error message: some updates were not installed with the 800706BE error number.
I also get the following window appears:
"Host process for Windows Services stopped working and was closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available. »
Also checked the recent errors in applications and a message from the typical example is the following:
' Application failed application svchost.exe_BITS, version 6.0.6000.16386, time stamp 0x4549adc4, broken module ntdll.dll, version 6.0.6000.16386, time stamp 0x4549bdc9, exception code 0xc0000005, offset error 0x00043df3, 0x17ac, 0x01cae58aa986d8d2 time start process id. I also have a window that opens by saying: "HotkeyApp has stopped working. A problem has caused the problem to stop working properly etc. "Anyone got any ideas on how I can fix this?
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/83ba0b9b-30e4-4D32-862c-eb37ceae823f
http://social.answers.Microsoft.com/forums/en/vistawu/thread/ae6e46cc-25fe-4c8c-b8b1-72fd4fc943fd
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/99c288af-c3d8-4da3-8593-9fc6c7511634
Read the information on the links above for your error Code and possible solutions to this.
If this does not resolve the issue:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
error message "there is a communication problem with the web server."
I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?
Hi, Mayhem15,
See if this troubleshooting help. It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.
How to troubleshoot possible causes of Internet connection problems in Windows XP
-
I check the display driver that I have and that is Intel HD P4600/P4700. It is a driver supported by Adobe, according to Adobe's Web site Adobe Photoshop CC GPU (graphics processing unit) and card video FAQ. What should I do? Furthermore, I don't need video improvements. I am running Windows 8.1.
It's your graphics card that is supported but always your graphics card drivers may be outdated and that could be the cause of this error message.
You should be able to download the latest drivers from site Web of Intels graphics card.
This error message means that he has temporarily disabled GPU enhancements which means filters and features requiring an implication of GPU would not work.
-
Software - Microsoft Fixit Performance name
Hello lalit304,
I suggest you post this question to the address provided by Joselbarra. I suggest you to provide as much system information about your computer when you post.
Microsoft Fix it Center:
-
Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer
I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!
uuggghhhhh!
flustered2,
You recently reinstall the operating system? If so, have you installed the drivers in the order?
How to download and install drivers in the correct orderFirst run delete print jobs to remove all print jobs stuck in the queue.
Unplug the printer.
Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.
Restart your computer.
Now you can install the printer using the Dell Printer 924 disc.
Link to the patch/drivers(if needed) is to...
Dell 924 Photo-All - In - One Printer owners thread (W7)
Don't forget the programs anti-virus and firewall will block communications.
Also try this tweak...
Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)
Go to the section USB controller, and then click the plus sign +.
Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.
Restart your computer.
Rick
-
Printer problems. Error "computer cannot communicate with the printer.
I had problems to access Windows Explorer and the rep Dell IT installed Mozilla Firefox 4.0 Beta 10 for my Windows Vista as an alternative. Now my Dell AIO 946 printer does not work. Whenever it is fixed, it prints until I am notified to download an upgrade of the system. After that I downloaded the upgrade, the printer does not work yet. The ink cartridges will not align. I get a message of "remove stickers ink", which is clearly not the problem because the cartridges are not new. Now, I get a message that says "computer cannot communicate with the printer. I re-installed the printer several times, disconnected from the power source and the URL and re-connected. Nothing seems to work. Any positive advice will be appreciated.
grandmainontario,
You can copy a document under the glass? B & W and color?
If so, executing delete print jobs to remove items stuck print jobs in the queue.
Unplug the printer.
Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.
Restart your computer.
Download the Vista drivers.
Install the Vista drivers. You will get a message, the printer is not connected. Connect the printer at the moment (power on)
You will find links to the patch/drivers to...
Reference Dell 946 Photo all-in-One Printer owners thread (W7)
Also try this tweak...
Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)
Go to the section USB controller, and then click the plus sign +.
Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.
Restart your computer.
You can also read...
You cannot print or preview before printing a Web page in Internet Explorer 9
Rick
-
Errors when trying to communicate with the server administrator
I'm deploying fusion web app to the stand-alone weblogic server (Version is 10.3 and its hosting OBIEE), but JDeveloper (Studio Edition Version 12.2.1.0.0) reports the error below.
[01: 27:03] - incomplete deployment.
[01: 27:03] [SPI: 260111 deployment J2EE] errors were detected while trying to communicate with the management server.
[01: 27:03] the requested attribute is not exposed via JMX: isDynamicallyCreated: com.bea:Name = AdminServer, Type = Server: DynamicallyCreated
[01: 27:03] com.bea:Name = AdminServer, Type = Server: DynamicallyCreated
However, the application server is successfully passed all the tests, the result below.
JSR-160 LENGTH tests... success
Tests of JSR-160 DomainRuntime... success
JSR - 88 tests... success
JSR-88-LOCAL tests... success
Test server MBeans model... success
... Controller App tests success
Tests of JSR-88-DEP-MGR... success
JSR-88-DEP-MGR-LOCAL tests... success
Tests of JNDI... success
JSR-160 tests edit... success
Tests of HTTP... success
11 of 11 successful tests.
I am able to successfully connect and deploy applications on the same JDeveloper weblogic - version 11.1.1.7, but I am facing issue with JDeveloper - version 12.2.1.0.0.
Any help is very appreciated.
Thank you
Vishwa
Hi Vishwa, there.
using JDev 12.2.1 to create fusion web applications means that you use ADF
12.2.1 and you try to deploy this app on WLS 10.3 which
knows nothing about ADF 12.2.1. This means that you must
install and configure the ADF 12.2.1 libraries running on your application
Server prior to deployment.
Before that review certification ADF matrix to determine the
version minimum 10.3 where you can run ADF 12.2.1-
However, you should check if installation 12.2.1 ADF will not
installation of OBIEE break.
Before you dig in fact ADF 12.2.1 installation can you pack
your application developed in JDev 12.2.1 and deploy from the admin
Console?
HTH,
A.
-
My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.
and also installed the latest driver by using the Software Update Wizard software.
That would not have been the best idea... but it is unlikely that the cause of your immediate problem.
The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked. Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019
I suspect that what really happens is that the driver has become corrupted. In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new. Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case. In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.
If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.
Use the free version, not the free trials of "pro" versions Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.
Do not run the scans at the same time. Each scan will take a while. Start one and go do a non-it chore. Once the scan is finished, leave the program to deal with anything it finds.
Once done, you can keep or uninstall programs, or both. If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.
Uninstall all software from Dell to control panel > Add / Remove programs
Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904
Close all running applications (anything with an icon on the taskbar).
Run the Fixit routine. Note: The routine Fixit has two modes, light and complete. It will run in full mode when you check the box "Reset the spooler to print on values." This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode. If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked). This may work anyway. You must restart the computer after you run in full mode; you need not restart after the Chase mode.
After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software. You will be asked to connect the printer to a suitable place. You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490
-
When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.
Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."
I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?
Hi ChristineKrause,Here are some links that might help you:
Advanced troubleshooting tips for General USB for Windows XP problems
Try the steps listed in the items mentioned above and see if that helps you solve the problem.
-
error: unable to communicate with the printer
I can print a test page for the hp deskjet 3510 series: hp printer assistant application on my laptop and I can print to the printer by sending an email, so I know that it is connected to the network and I know that my laptop can be printed on it. But when I try to print from Word or any other application I get an error: unable to communicate with the printer
Any ideas?
Download and run this: http://support.hp.com/us-en/document/c03286146
What did he say?
-
Unable to communicate with the printer HP 4630
Continue error message of "Unable to communicate with the printer." Even when connected by USB.
Have reinstalled the software several times, checked the wireless (no problem), printed many pages of configuration directly from the printer.
I keep trying to add the printer to my preferences. One thing is that it will only add like a scanner or fax, a PRINTER. It is also called Hello Scanner. Why can't I add as a printer?
Now, it will not also let me COMPLETE reinstallation of the software, it freezes at the section add printer and I can't move forward. So frustrating...
Help!
Hi @PKahn
It seems that the computer does not recognize the print driver.
We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.
Reset the printing system
- Click on the Apple icon ( ), then click on System Preferences.
-
Error: "unable to communicate with the TWAIN device" with brother MFC7820N
Original title: can I connect a scanner through a switch?
I'm trying to analyze something like I did it many times with my brother MFC7820N hung on my tablet. But recently, I replaced a 2nd router I had in my system that failed with a new Dynex switch.
I have my internet modem and 2 computers connected to a Linksys wireless router. I have another ethernet cable connecting the router to a new switch. I have my 2 printers attached to the switch. One is a Brother HL-2700CN color laser and the other is a brother MFC7820N mutli-function. It use PaperPort to scan stuff on him, since provided on the CD with the device.
So today I open PaperPort and click the Scan button and it appeared an error saying unable to communicate with the TWAIN device box.
So I clicked on a doc shown in PaperPort that I had scanned a few weeks ago and I click right and select Print and printed to this MFC7820N.
Then I come back to click on scanner again and yet again, it appears that box. So I watch and WIA-Brother MFC-7820N LAN is displayed in the Scanner marked drop-down list box. So I switched the power of the MFC and tried again and it still appeared that same box again.
OUCH! I'm going nuts! You have any ideas?
Hi Jeff has Davis,Method 1: Uninstall and reinstall the driver again and check if it helps fix the problem.See this article for more information:Method 2: Try the suggestion given in this article:
Maybe you are looking for
-
Samsung HM1350 headset works with the iphone 5?
I ordered the Samsung HM1350 Bluetooth headset online and I intend to use it for the iphone, I just want to know if it works with it.
-
MY EMAIL ADDRESS WILL RESPOND TO CANCEL WITH ONE CALL OR E-MAIL WITH PH # APPEAL? PS I RECORDED THIS MESSAGE in MISC FILES AND is not THERE NOW
-
How to set up my desk now that I'm all Apple.
I started the movement slowly, but now I'm here. Entirely on Apple. Running all El Capitan. My office is a Mac Mini w/server end 2014 w / 16G of RAM and 2 TB inside. I have a 27 "Thunderbolt display end of 2015. I have an early 2015 15 "MBP w / 16
-
Saving data when displaying data
I want to save my data and access it while the test is running. To avoid problems with files I usually create a copy of the file and use the copy while the test is running; There's my .csv file. My question is has anyone at - it a more elegant approa
-
WMP11 Sync - articles removed from the device
I'm having a problem with Windows Media Player 11 attempt to synchronize files on my MP3... after that I have sync a song I want, Windows Media Player deletes 25 other songs that I've previously synchronized before synchronizing this song... and thes