Error message printing everytime I print

Similar Questions

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Persistent error message: printer failure

  Office Jet Pro 9600

  I tried to realign and then clean the print heads. Once this is done, I started to receive an error message "error in the printer: there is a problem with the printer or ink system.» Turn the printer off, then on. If you continue to receive this message, contact HP. »

  There is a help button on the bottom of the error message and when I click it, it adds a proposal to put off the printer, unplug the unit and then turn off again, when I do this, I keep getting the above error message.

  I'm not sure how to "contact HP" as the support Web page does not appear to be one way to do (other than paid support).

  Thanks for any help you can give me.

  After checking, I found that the print head should be replaced. The cost of the printhead (from Amazon.com) more than $ 100 (includiong of ink), but a new Officejet 8600 Pro costs less than $100 at a local Office Supply Chain Store. I bought a new and don't have the problem anymore.

• HP officejet pro 8610: Error message print Officejet Pro 8610 after 30 seconds

  Whenever I print on the officejet pro 8610, after 30 seconds fo print an error message appears that says that you cannot print the job. If the print job is short, the message appears when the job is finished. If the print job is not finished, the printer stops mid page. I have a wireless connection. The HP install say Assistant and the doctor print and scan all right. My operating system is windows 8.1

  After trying the patch a second time, it worked fine.

  Thank you

• LaserJet Eprint error message: printing delayed Due to print some documents/not connected

  It's so good that I get an email telling me my eprint status - but it's so frustrating error messages are not correct.  The printer is connected, the printer does not print other documents!

  How did someone else solved this problem?  It is usually intermittent, but at the present time, it is constant.

  Thanks in advance

  @KiwiKate

  Great! I'm so glad you're back on!

• Error message Printer Spooler 0x000006ba

  • After months of successfully use a HP Laserjet 1012 with Windows Vista Home Premium edition, I received the following error message: 'impossible operation finished (error 0x000006ba). The local print spooler service is not running. Please restart the spooler or restart the machine. "Restarting the machine or the spooller does not help. Checking system files shows no problem.  Windows Vista has improved with all the current upgrades.  I can't print with the HP 1012 currently.  This error does not appear when you search the Microsoft Web site.  I suspect the print spooler file was damaged, but do not know how to remove and replace.

  Have you tried uninstalling the printer software, and then reinstall the printer and its software?

  Who will corription in the printer software.

  Mick Murphy

• SE error message: printer could not be removed. Error 0x000006be"and new Kodak 7250 printer do not print

  Original title: new Kodak 7250 printer print a vista computer

  I'm trying to help my brother who lives in another State set up his new printer Kodak 7250.  After you install the software it is plugged into the USB port.  Vista has detected new hardware and did his thing, and everything seemed good.  However, it would not print from the computer.  The printer is listed and selected status, however, stated that it was not connected.  We contacted Kodak tech, they take control of his computer.  They have tried to delete the printer but could not... "Printer could not be removed... Error 0x000006be ".  Tech said problem wasn't Kodaks and contact Lenova on bad print spooler.  We checked the print spooler, which was running and in auto mode.   We tried several times to remove the printer and start over, but shows the same error.  Any help from anyone would be appreciated.  BTW, her worn old HP printer had no problem.

  Hi vbrown7,

  You can try to let flow the Fixit and see if it helps:

  Links:

  Problems of print and error - a Mr Fixit of printing

  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit

  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  Also see the article and check.

  Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»

  http://support.Microsoft.com/kb/946394

  You can also check out the following link and try the steps suggested by Arthur Xie Microsoft, Moderator on Monday, June 1st, 2009 09:39

  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/3e47b7b6-00A3-47E1-9e28-e615fbff5f87/

  1. you use an administrator account?

  If this isn't the case, then you should use the administrator account and check.

  Also, try to create a new administrator account and check if the printer is able to be viewed / deleted.

  Check out the link:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• startup error message: printer card transfer moniter has stopped working

  Thank you for your help.  I said that Microsoft will try to solve the problem... but the error message continues appeaering.

  Hi SIDDTHEEKIDD,

  1 when was the last time it was working fine?
  2 are you facing problems with the printer on the computer?

  It is possible that some third-party programs installed on the computer are causing the error at startup.
  I suggest that you perform the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error message printer 7510, 'Impossible to communicate with the printer' I can't print from my desktop, laptop

  7510 HP e-All-in-one-C311a printer, Windows Vista, giving following error message when I try to print from my counter top "Unable to communicate with printer" also portable print request print not and my iphone does not find the printer.

  has run the wireless network, no problem not detected test results

  the status of the printer report, network status: ready, connection type: wireless

  has run HP page configuration, all good here

  Thanks for your reply, I read one number of other questioned posted here, and numerious corrections was to unplug the router, so I tried and it fixed the problem... once again thank you for taking the time and answer my question.

  Jimmie

• Error Message printer clock no installation on X 576

  I have just installed a new X 576 yesterday and now I get a message at the start of the printer there is an error in the configuration of the clock. I have correctly installed the clock via the control panel preferences, the date/time function reads correctly. What Miss me or is the fault of the clock?

  The text of the error message was "the product has detected an error with the clock of the product. Problem with the preparation of the printer.

  Solution? 1. open and close the cartridge door.

  2. - or - turn on the printer.

  3. - or - the printer Service,

  I did 1 and 2 and also updated the firmware in the printer to the latest version. So far, the problem has not reappeared and seems much more the printer after printing documents.

• Cannot find the error message printer

  When you try to print via bluetooth Mac OSX 10.8.5 on my Photosmart Premium all in one 309 has to get the message "print - printer.  Why?  How to solve?

  Hi hay3911,

  Thanks for letting me know that the problem is solved. {Happy Dance }

  Remember to mark the Message 5 post that solved the problem like "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

  Thank you.

• DeskJet 2542 all-in-one: parse error message prints well

  I kept getting this error trying to scan a document for the first time.

  "An error occurred all in communicating with the device. Please check that the device is correctly connected and powered. »

  To make sure that the printer is connected I printed a pdf on file on the computer and managed.

  I installed from the given CD and I intalled software on the HP site that grew to my specific operating system OS X 10.9.  I checked my firewall and allowed him to be opened for printer sharing.  I restarted my modem wifi network, I restarted the computer, and I restarted the printer.  I have reset my printers and reselected this printer... which is the only printer that was available for selection.  The computer recognizes the printer completely, however it just keeps giving me the message quoted above for scanning.

  Help, please.

  Hello @Elochin and welcome to the Forums of HP!

  I understand that you are having problems of scanning.  I would like to help!

  You have problems, make a copy?

  I have a few steps, I recommend you:

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet 2540-All - in - One Printer full feature software and drivers series.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Officejet J6480. Downloaded driver and restarted; get an error message "printer system failed?

  Can't seem to get the printer to print; rebboted and re-downloaded driver

  Hi reelbad55,

  ·         The printer was working fine?

  ·         You did any recent changes?

  You can check if the following is useful.

  Method 1: Run the next fixit and check if the problem persists.

  Problems printing and printing errors

  Method 2: Remove the printer completely, and install it again to check the issue.

  Add or remove a printer

  Method 3: Check to see if this article helps you.

  Solve printer problems

  See also:

  Printer in Windows problems

• Toshiba lap top c55 - r error message: printing

  When I print more than three pages of two pages of internet explore the first prints without problem. When the third page is printed, it stops printing and gives me an error printing. I tried to use the repair tools and troubleshooting, but have not been able to correct the problem. I tried another internet web page and the same thing happens. Also tried another laptop and the problem is the same. Help, please! I just bought the printer one day ago.

  Here's what we'll do next:

  1. Turn the printer off.
  2. While the printer is off, go to your PC.
  3. Open the Panel and then devices and printers.
  4. Right click on the image to your printer and click on remove device.
  5. Turn on the printer.
  6. If the printer is connected wirelessy to your network and then click Add a printer. In the next screen, select your printer and follow the prompts to add the queue to your PC.
  7. Try to print.

  If it works please let know clicking on accept as a Solution. If you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• Error message: printer: "arguments are not valid." How can I fix it.

  Only happens at startup and does not appear to cause problems

  Hi pblead,

  Can I find out the manufacturer of your printer so that I can better help you?

  Are getting you a popup on start?

  You can perform a clean boot to find blue screen errors. Also try this...

  Follow this link: http://support.microsoft.com/kb/929135

  Step 1: Perform a clean boot.

  Step 2: Enable half the services.

  Step 3: Determine whether the problem returns.

  Step 4: Enable half of the startup items.

  Step 5: Determine whether the problem returns.

  Step 6: Resolve the problem.

  Step 7: Reset the computer to start as usual.

  I had the same problem and came across various 'solutions', but it is great for me...

  Control Panel > printers and faxes

  Add a printer > click Next > local printer attached to this computer

  (uncheck the auto detection and installation) > click Next

  (this is what worked for me)

  with "use the following port" selected in the drop-down list, I got the dlink-xxxxxx [standard tcp/ip] printer name listed.

  given that I had already installed the drivers, I hit next and selected "replace the drivers' and it worked like a charm

  Try also download and Fix It using the miscrosoft link:http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems

  Hope this helps you

  Concerning

  Bharath
  Microsoft technical support