Error message receiver: 4.73 help system home Budget for Dummies running.

Original title: 4.73 help system

I like the others has the Budget home for Dummies and get the same result. So I followed the things you said and it still does not work.

Sandie

Hi Sandie,

1. who is the manufacturer of Budget home for Dummies?

2 have. what troubleshooting measures you tried to solve the problem?

3. What is the graduating error message that you receive?

4 Windows operating system you are using?

You can contact the manufacturer of the product and check system specifications required to run the program.

If you are using Windows 7, you can try to run the program in Windows Vista or XP compatibility mode and check if it helps:

For more information, see the article:

Make older programs in this version of Windows

Tags: Windows

Similar Questions

  • WAP Error Message received invalid key EAPOL MIC (msg 2/4)

    Hello

    can someone help me with this error message received invalid key EAPOL MIC (msg 2/4).

    Timestamp Gravity Service Description
    November 5, 2012 15:11:27 warn hostapd [4365] Received invalid key EAPOL MIC (msg 2/4)

    Only, I get this message of a device when connecting to the WIFI network.

    This only happens from time to time. Sometimes it connects without any problems.

    Appriciate any help.

    Sincerely

    Patrik

    This is an error when the STA (the computer) built the package. 2/4 is to indicate the negotiation process where it sends a value for single use with his own microphone. A microphone is a verification of the integrity of the messages (or code).

    Basically, this error is said, everything that this computer is sending is not valid. You can try to make the AP behave differently as force the use of side effects instead of TKIP + AES depending on which product you have. About removing 'mixed' wireless network. As example, try using WPA2 (AES) only.

    These errors are more frequent with TKIP, since it is the nature of TKIP to send one key per package.

    -Tom
    Please evaluate the useful messages

  • error message received A12E5 when buying LR and PS CC.  What should I do next?

    error message received A12E5 when buying LR and PS CC.  What should I do next?

    Hello

    Please see A12E5 error installing Adobe Creative product cloud

    Hope that helps!

    Kind regards

    Sheena

  • I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

    I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

    Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

    Help, please.

    Hello
     

    Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
     
    (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
     
    (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
     
    Warning of the BIOS:
    BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.
  • Error message: the software can be installed by using the command "run under...". ».

    I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

    Try right click on the setup.exe > run as admin.

    If this does not work, try the Vista Hardware and drivers Forum:

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    See you soon.

    Mick Murphy - Microsoft partner

  • HP Pavilion Gaming Notebook 15: Error Message received "the operating system is not currently configured torun this application."

    Anyone happen to know what this error message is referring to, or what should I do?

    It unfortunately and it does not say aything else. There only the option to click OK that closes just the box pop up.

    Its been popping up randomly in the past several times I used the laptop. Initially I thought that it was because there was still thinking it would correct after the execution of the latter but its re-appeared again and updates to run. It does not ask respect or other options to solve the problem?

    Send a print screen but don't know how?

    I have not had this laptop of all (about 2 months) and don't expect to have problems of this kind already! Any help appreciated

    Thanks in advance

    Hello

    This problem occurs because of MS Office (tails, corruption).

    Try reinstalling Microsoft Office as follows:

    1. uninstall all MS Office applications in a standard way via Add/Remove Programs, restart.

    2. use instructions and special removal tools to remove completely all MS Office applications:

    -office 2013 or earlier version: install this tool http://download.microsoft.com/download/0/e...16a296a/ork.exe, go to start-> all programs-> Microsoft Office-> Microsoft Office Tools-> Resource Kit Microsoft Office 2003-> removal Assistant, in the Removal Wizard, select 'Comepletely remove all versions of my previous Microsoft Office application' and follow the instructions;

    -for Office 2007, 2010: http://support.microsoft.com/kb/971179

    -office 2013, 365: http://support.microsoft.com/kb/2739501/en

    3. manually remove all objects listed under:

    -C:\Program Files\Microsoft Office

    -C:\Program Files\Common Files\Microsoft Shared\OFFICE *.

    -C:\Documents and Settings\All Users\Application Data\Microsoft\OFFICE

    -C:\ProgramData\Microsoft\OFFICE

    4 restart, make sure that the problem is not reproduced more.

    5 install the necessary package of MS Office.

    By clicking the Thumbs-Up is a way to say - thank you! ******
    * Click on I accept as Solution on an answer that solves your problem to help others *.

    I am an employee of HP

    #HPExpertsday

  • Error message received in Microsoft Updates, KB2691905

    I guard received the following message, weither I do the update manually or automatically

    -MS Security Essentials Microsoft Security Essentials Package Client update - automatic updates for KB2691905 Friday, August 3, 2012

    I hope someone can help.

    Darlene

    Hello

    1 did you change on your computer before this problem?

    2 - is only a problem with the installation of this particular update?

    3. What is the exact error message?

    Check if the update is installed on the computer.

    a. click Start , and then select Panel.

    b. double-click on Add / Remove Programs.

    c. place a check next to display updates.

    You can upgrade the latest version of Microsoft Security Essentials.

    a. click on the Home of Microsoft Security Essentials tab, and then click upgrade now.

    b. on the help menu, click Microsoft Security Essentials upgrade.

    c. on the Microsoft Security Essentials home page, click free * download to install the latest version. To do this. Visit the Microsoft Web site at the following address:

    http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

    See also:

    Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

    http://support.Microsoft.com/kb/906602

    Previous post your answer for you help in this matter.

  • Error message "could not start the system event notification service.

    Original title: windows s event notification service does not start whwn that my PC is started

    Hello

    I'm running on the windows operating system 7, suddenly today I see when my computer starts, he says:

    1. windows event notification service does not start

    2. start menu back to Classic view, all of the aero themes has turned.

    3. right click on desktop seems to not work

    I have not had any installed software recently, don't know why it happened you can help me with this? I've restored a few days again the same question

    can someone help me?

    Sujith Hello,

    Thanks for posting your question on the Forums of community of Microsoft.

    According to the description, you got the error message "windows event notification service cannot start.

    I suggest to follow the suggestions of Bikesh T replied on 1 June 2011 from the link below and check.

    Reference:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/failed-to-start-system-event-notification-service/eec9b5cd-fda9-43eb-B6D0-d2ba92e79413

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • Qosmio G20 error message: problem with the cooling system has been detected

    I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

    Error message: Warning: a problem with the cooling system has been detected.

    I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

    When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

    I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

    I would be grateful if someone could give advice if the problem is the fan or something else.

    If the fan is the problem, where I can buy a: i live in the United Kingdom?

    Hello

    I think there might be something wrong with the cooling module and the replacement would be necessary.
    Usually, this should be done by an authorized provider (ASP) in your country.

    Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

    So contact the ASP in your country and ask for later handling.

    By the way; also, you can buy the cooling of the ASP module!

    Good luck

  • Help, please! I get an error message that access is denied 0x80070005 when I try to run the backup facility.

    I use Windows Vista as administrator and use the automatic installation of Windows to save everyday on an external hard drive - this has been fine for months and nothing has changed, but now I get the error message and can save is no longer. I tried to disconnect the external hard drive and reinsert and the drive is recognized. Back up to start running for awhile and then fails. Can anyone help please?

    Hello

    Using third-party backup program or windows backup?

    Method 1
    Step 1:
    I would suggest that you start the computer in safe mode and then run the backup files.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2: If you are able to run backup ins fine safe mode, and then perform the clean boot and remove the program that is causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

    Method 2
    I suggest you run virus scan online by using the Microsoft safety scanner.

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

    Method 3
    Under your administrator account, get full rights and take possession of all the C:\ drive using the following procedures.
    To view your permissions, right-click on the file/folder, click Properties, and check the Security tab check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.

  • Error message received when you try to send e-mail messages through windows messaging

    I try to send an email using my Windows Mail and I get this error message:

    An unknown error has occurred. Subject 'Test', account: "bellsouth.net", server: 'bellsouth.net', Protocol: SMTP, server response: 421 cannot connect to the SMTP 216.77.188.73 (216.77.188.73:25), connect error 10060', Port: 25, secure (SSL): no, Server error: 421, error number: 0x800CCC67

    I use a windows vista with my bellsouth.net email address and I have comcast for my ISP.

    EDN

    I try to send an email using my Windows Mail and I get this error message:

    An unknown error has occurred. Subject 'Test', account: "bellsouth.net", server: 'bellsouth.net', Protocol: SMTP, server response: 421 cannot connect to the SMTP 216.77.188.73 (216.77.188.73:25), connect error 10060', Port: 25, secure (SSL): no, Server error: 421, error number: 0x800CCC67

    I use a windows vista with my bellsouth.net email address and I have comcast for my ISP.

    EDN

    According to Bellsouth, name of the incoming and outgoing server is... mail.bellsouth.net
    Your error message said you it is unable to connect to SMTP (which is outgoing) server, because you entered the wrong server name. Change the name on incoming server and outgoing server and see if that fixes the problem.

    If this does not help, transfer to the section networking, e-mail and put online:
    http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • CQ60-419wm frequently stops without error message. new bios any help.

    My laptop turns off for no apparent reason after varying amounts of time.  Screen goes black and after a minute or so, all the lights go out.  Do not try to restart.  I get no error message and loaded a bios updated which did not help.  Any help?

    Hi Jo,.

    It would be really not like this problem is due to overheating (as you noted) because the fan has failed.

    The replacement procedure is detailed from Page 80 of your & Maintenance Guide.

    However, it is not easy to replace part so you can consider taking the laptop to a computer local repair shop and get at least an estimate for them this replacement.  Then you can weigh the cost the cost of a new laptop.

    I hope this helps.

    All the best,

    DP - K

  • Classic activation error messages blackBerry - set up HELP

    Hi all

    I hope you guys can help as I ned it BIG TIME!

    I have to put up all of my work phones (30 + BB classic) and I struggle with the kick tutorial (even if I did it for 5 phones already) and if this does not prevent me then I get the activation error message advising me that I can not add a becuas of email account that is not completed the implementation of process or unit training tutorial (all tutorials are complete and have ticks next to them).

    Please help I need to get these all met as soon as possible. Its so stupid that Blackberry have this stupid process that does not allow a simple set up. Never came across something like this before where you cannot configure a phone without all this hassle account.

    Can anyone help?

    I googled this problem and could not find anything and then a colleague has tried and found this link which helped

    http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do;JSESSIONID=4995A7294DB493B8E06A24A8805C72D6?...

    still doesn't explain the stupid rules on tutorials with complete it.

    Can someone change Blackberry this pathetic rule?

  • I get the aRuntime error message. Can you help me?

    I get this error message: "Microsoft Visual C ++ Runtime library, program C:\Program Files (x 8...» This application has requested the execution in a unusual way. Please contact support team of the application for more information. "Can you help me?

    I tried all your suggestions; Unfortunately, nothing has worked.  I even deleted the Visual C++ packages, and according to the instructions, I rebooted my computer.  Even if they had all been removed, I always the message "Runtime Error" when I rebooted.  I then reinstalled the libraries.  Same error at startup.  Anything else you can suggest?

  • Error message receiver: headphones may not be installed correctly and Sennheiser U 320 USB headset no longer works.

    Original title: USB headset not recognized by windows 8

    I have headphones Sennheiser U 320 USB that I got about 6 months before, it worked fine up until this point. The sound no longer plays through the headphones, he just playing through the speakers. I reinstalled my audio drivers and I tried to put the default audio headset in playback devices but the headphones don't even appear. When I right click on the space empty and check see the disconnected devices that they don't even appear. I don't know what to do at this point. At the time where they worked I got a few messages in the status bar system that says my helmet might not be installed correctly, I tried to fix it but didn't know what to do so I swept, then they just stopped working all together.

    There seems to be something weird with the usb it comes spontaneously started working and then when I unplugged and plugged again it does not work.

    Hello

    For a better understanding of the issue, I would need more information on your side.

    1. are you able to connect and use other USB devices on the computer without any problem?

    2. don't the problem occurs when you connect the headphones on another computer in Windows 8?
    3. What is the brand and model of the computer?

    I suggest to uninstall and reinstall the Device Manager USB controllers and check to see if it helps.

    (a) press on the Windows key + R, type devmgmt.msc.

    (b) expand USB controllers, click drivers.

    (c) click on Properties, click on the Uninstall tab.

    (d) click OK.

    (e) restart the computer and it will update automatically pilots.

    Note: You can also install the latest Chipset driver on the computer manufacturer site.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

Maybe you are looking for