Error message regarding the user agreement

Similar Questions

• Turning on the laptop computer error message reads "the user profile Service service has no logon. __

  The error message reads "the user profile Service service has no logon.

  User profile cannot be loaded.

  Thanks have tried but can't boot from a fix it for me or set me.

  Go to Safe Mode with networking

  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Mode safe mode with networking

  You can log into your own account in safe mode?
  If so, you remember the date when you did NOT have this problem?
  If so, this date no more than 10 to 15 days ago?
  If so, again, please do a restore of the system in safe mode.

  How to restore the system:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Once completed, restart your machine and see if you can log in to your account in NORMAL mode.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• We get a blue screen with no error message when the user arrives in the morning... but not every day.

  Have a user who was the bluescreen with no error message when she arrives in the morning. This doesn't always happen.  But when it does, it must do a hard boot of his computer. It runs XP SP3, and it is on a domain. Another user reports what is happening also, but not as often.

  Yet once, it is not consistent where it happens every working day. It's maybe 1 or 2 days a week, if that. Hibernation is disabled and power options are set to never turn off.
  If this is not enough information, I will be happy to provide more if necessary. Any contributions to this issue would be appreciated.
  Thank you

  This may apply . But this message does not resemble a BSOD / crash

• error message when the user after boot entry

  HP Pavilion d6t-3000 CTO Entertainment Notebook with Windows 7 64 bit.

  Error message: procedure entry point sqlite3_wal_checkpoint could not be found in the dynamic library SQLite3.dll.

  It is better for you to do it yourself.  I'll do a search for Apple all associated products/application and delete them or go to add/remove programs in the control panel and find everything that Apple associate and remove it that way as well. If you do not have music in Itunes, you must make sure that they are back in another file or on a flash drive or an external hard drive.

• Error message to the user

  Hello

  In the attached VI, I took a structure case for displaying the message whenever error enters the block. But his irritates me even if I gave a user message in this but it not poping the dialog box every time that the error enters into this block.

  Can someone understand it. Thanks in advance.

  How many times did you say? DISCONNECT THE WIRE OF THE ERROR IN YOUR DIALOG BOX. This was not part of any long description. It has been clearly stated

• Cannot open my other user accounts... Download the message, that the user profile service service has no logon. cvannot loaded user profile

  Having only one administrator user account. All my other user accounts will get the above message. Help, please.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Husband can no longer connect computer. Message reads ' the user profile service has no logon. User profile cannot be loaded"

  How can I solve this problem? I have Windows Vista.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Jdev11g; Customizing the Error Messages from the Business components

  Hi all
  
  Using Jdeveloper 11.1.1.2. I customized the BC error message using message bundle. My bundle of message class is
  
  SerializableAttribute public class MessageBundle1 extends ListResourceBundle {}
  private static final Object [] [] sMessageStrings =
  New String [] [] {}
  {"Houston-26048',"child records exist against the selected record"},
  {"EMP_JOB_FK", "there are the child records to selected record" ""},
  {"Houston-25013',"record already exists"},
  {"JOB_ID_PK", "' Job ID already exsist" "}
  };
  
  / * Return string identifiers and the corresponding Messages in a two-dimensional array.
  */
  protected Object [] [] getContents() {}
  Return sMessageStrings;
  }
  }
  
  
  Need help on two or three issues, I am confronted with this: -.
  
  (1) although I gave the error message for Houston-25013 and JOB_ID_PK, always I get after the error message on the user interface, when you save the new record
  "Too many objects correspond to the oracle.jbo.Key [AD_PRES primary key]."?
  (2) why do I get "Attribute in HrModule.JobsView1 JobId is required." with above the error message in the error popup window?
  "(3) when removing the record, even though I'm getting desired error message on UI ' oracle.jbo.DMLConstraintException: there are the child records to selected record", why the error message is prefixed by "oracle.jbo.DMLConstraintException".?
  (4) how can I locate the error messages in another language?
  
  Thank you
  Vikram
  
  Published by: Vikram K on March 22, 2010 15:23

  Hello

  Just put the number of the error, instead of Houston-25013 1), try with 25013

  For 4) you must create a second resource group with the locale in his name. ex I have a BCBundle.java for English and a BCBundle_fr.java for the French
  Check the guide FusionDev and WebDev guide for information on the locale and the beams of the resource.

  HTH

  Concerning
  Paul

• View the Error Message in the Console of the IOM

  I have a scenario where the user triggers the request for the third time for the same RO then error message should be displayed to the user and this RO status must be set to revoked.
  
  To do this, I have the unconditional task that returns R as response when the user raises the demand for the 3rd time. Based on this response, I called another task that will display the error message to the user.
  
  But the problem is that the State of the requested 3rd RO is showing that Provisioning and Validation of the system as pending. But I actually traced the answer R to revoked.
  
  I don't know why the Validation system is showing as pending. But if I remove the task that shows the error message to the user, then the status of the object shows as revoked.
  
  This part of the requirement is POC and the receiver Office that I mentioned above is a dummy ro.
  
  Pls help me solve this problem.
  
  Waiting for your valuable answers.
  
  Thanks in advance.
  PK

  Hey, you made it rejection Fatal because it shows you the status rejection.

  If you select error then it does allow you to go further.

  I would recommend using error, it will not allow the user to start the service and displays error you make provisioning for the third time, so you are not allowed to do this.

• When I try to import new files from an SD card, I get an error message.  The message reads: "If there is already a file in: / Users/student/movies / '.  I want to be able to drag and drop the files, by clicking on the SD icon on the desktop and drop it in

  When I try to import new files from an SD card, I get an error message.  The message reads: "If there is already a file in: / Useres/student/movies / '.  I want to be able to slide the SD card on my desktop icon in the quick editing workspace and select the files I need to change.  Thank you!

  You are on a network in a school? If there might be one video files with the same name already exists in this folder.

  Try to get the video files using add media videos from camcorders or cameras and by accessing the camera or the card reader by using the video importer. In the video importer, you can set the custom file name and rename your files so that they will not have the same names as existing files.

• Chrome does not recognize my creative cloud installed and active acrobat. I'm trying to download a PDF file from Web sites and to get the message that I must first launch acrobat and sign the user agreement, but acrobat is already underway.

  Hello

  I recently tried to switch my browser to Chrome of Safari, which I never use and I'm pretty happy with Chrome overall I had to go because I can't recognize my installation of Adobe Acrobat.

  He always tries to open them in the preview of a PDF from the web and then if I try to export it as a pdf after sitting and wait a long time for it "thinks" I get error that I need to launch adobe acrobat and accept the user agreement.

  But acrobat already running!

  Any ideas?

  If you are on a Mac, I've read that Google has recently changed to Chrome so that it cannot use Adobe PDF plug-ins. These have been not supported for many years in all cases. I suggest you to use Safari when you need PDF files (but noted that the Mavericks Apple stopped using Adobe plug-ins, however in this case, there IS a solution).

• I want my procedure to return the error message in the batch file

  Hi team,

  I have a requirement from users of the company. Could you please provide your suggetsion to achieve this.

  We have a batch file that is short on time, in this batch file, I'll call you a SQL script.

  In the SQL script, I called you a procedure to run.

  Inside the procedure, I have the following statement,

  Select, insert and update commands.

  and I use ANOTHER exception to handle errors.

  My requirement is to pass the error messages for the batch file when one of the orders was not not run and send a notification e-mail to the group with the error text.

  Please provide your suggestion.

  Thank you and best regards,

  Robette.

  Could you please tell me, inside the procedure I have to remove the OTHER exception and how I can pass the value to the command file and where I add the content of the e-mail notification.

  I suggest that you write modular code instead.

  1. create a log table

  2 modify the procedure to log on to the error log table or exceptions

  3. that others suggest have the recovery/return procedure an exception in the client/batch file

  4. for an exception have the batch file to call a procedure to do the emailing if there were exceptions

  IMHO, it's a MISTAKE to try to put all these features in a single file. It is NOT scalable and makes it almost impossible to update the batch file if the requirements change in the future.

  Logging should be a separate process with a separate log table so that you can capture ALL of the information that may be necessary, now or in the future. Enter information in a table of newspaper, it is EASY for ANYONE to query to see what problems are occurring in the process.

  Emailing should be a separate process so that it can be used for your batch file current, files of future orders or even by procedures or functions in the database.

  Do not try to create a solution "a script does everything."

• ORA-04031: unable to allocate 32 bytes of shared memory ('shared pool'.  Check your error messages for the cause of the error. (= < POINTER >)

  Dear team,

  We have for instance R12.

  DB - 11.2.0.3

  12.1.2 - application

  in this concurrent instance depressed frequently when checking of log file showing the error as

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic FDPCRQ met an ORACLE error. ORA-04031: unable to

  allocate 32 bytes of shared memory ('shared pool'.

  Check your error messages for the cause of the error. (= < POINTER >)

  .............................................................................

  APP-FND-01388: cannot read the value for the profile FND_MGR_STRTUP_THRES_TIME option in the routine, and routine.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  
  

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  Post: WARNING: mail_queue_enter: create file maildrop / 379309.437: permission denied

  Please guide me to solve this problem.

  Concerning

  Kumar V

  Dear Kumar,

  I suggest you to check the FND_NODES table

  1) connect to SQLPLUS as the APPS user and execute the following statement:

  Select CONCURRENT_QUEUE_NAME in the FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM ';

  (2) If you have found that FND_NODES table with entries incorrect node (old node from the Source Instance), and then run the query to clean below

  EXEC FND_CONC_CLONE. SETUP_CLEAN;
  COMMIT;

  (3) then run AutoConfig on all stages, firstly on the DB layer then APPS and webtiers levels to repopulate the necessary system tables,

  and make sure that you are now able to see the correct entries in the FND_NODES table and start the application services.

  Kind regards

  S27

• I can style Web Forms Confirmation Page results - more precisely the 'ERROR' message in the results?

  Hello

  I can style Web Forms Confirmation Page results - more precisely the 'ERROR' message in the results?

  {module_webformresults} is self rendedered as a table with ID CSS attached, but nothing specific to the error message - which results in the error not be perceived.

  The ERROR is triggered by a user name or password dulplicate.

  I tried to use a text JQuery selector, but it does not work with the results for some reason any.

  Any ideas?

  Attached are the error of the results, see Username

  Thank you!

  P

  

  Hi Patrick,

  It should work. You know the id of the specific area, you know what string to search for in order to condition the appearance of the new message.

  

  Kind regards

  Alex

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.