Error message: the instruction at oxo5e32570 (or0x05e32570) Ref. 0x0000006c memory could not be written. -What it means and how to fix it?

Appear when I restart and shut down my computer

Hi Gary,.

This error is pretty generic, and can have several causes. However, this is a potential resolution to your question, which is an article that deals specifically with this issue. The link also includes a fix.

"Error message when you try to shut down Windows Vista:" education to... the memory could not be written "

http://support.Microsoft.com/kb/937381

Hope this helps and let us know how it works for you,

Steve <> Microsoft Partner

Tags: Windows

Similar Questions

  • ERROR LOADING c:\WINDOWS\MFN3D12. DLL IN THE SPECIFIED MODULE COULD NOT BE FOUND - WHAT IT IS AND HOW TO FIX

    WHAT CAN I DO TO REMEDY TO THIS PROBLEM-SE SURVEY WHEN I TURN FIRSTLY ON COMPUTER

    Hello

    The computer tries to run this file or a program that uses that when drop if first charge. I can't find mention on internet so not sure of what software it comes with. The problem will be solved normally uninstalling his related software to and put it back. I would say by clicking Start, and then type msconfig in the Run dialog box. This will bring up a new window. in the tab control start to the bottom of the list of issues that load. If there is an article here with this file name, remove the tick the box. OK, the window and reboot. see if the error.

    If there is nothing here about the file, you may need to remove a key from the windows registry using regedit, however if your not confident using regedit it I would sugget using software like ccleaner to clean the registry. This will undoubtly get jeers from others on the forum as its not considered good practice to clean the registry. It can cause more problems that it solves. But perhaps fewer problems than if you dive into the registry yourself.

    MyPcHealth - free tools

  • 'Test latency error' what it means and how to fix it.

    I've tried to do a test of broadbandspeed and in the attempt, I was told, there was error, namely "latency test. -What it means and how to fix it?

    Was it speedtest.net?

    If so, this see from their base of knowledge ( https://support.speedtest.net/entries/21544197-What-does-Latency-Test-Error-mean- ):

    «"Latency Test error" occurs generally when the server has been temporarily interrupted.» We have a server monitoring group that will be contacted periodically servers to verify that they work correctly, but there may be a slight delay before automatically recognize us that the server is down. Please let us know by filing a support ticket specifically identify which server caused the error and try to test it on another server. »

    If it was of speedtest.net, then try another Tester like http://www.zdnet.com/broadband-speedtest/ for example (there well others).

  • Fatal error in WMI. What it means and how to fix it?

    I tried to do maintenance on my computer. However, I get the following message: cannot access the Windows Management Instrumentation software. Management of Windows files may missing or moved. I don't know what that means and I don't know how to fix it. I know that my computer is running like * now.

    If you see a message like this:

    Unable to access Windows Management Instrumentation software.  Management of Windows files may be displaced or missing.

    Either the Windows Management Instrumentation Service is not running or your information from WMI files are missing or damaged. It is easy to rebuild the WMI information files and replace all the files corrupted or suspicious.

    To solve your problem, stop the Windows Management Instrumentation service, rename the folder WMI suspicious or distressed, then restart your system.  When the system restarts, the WMI service will start automatically and rebuild the WMI folder and it's content automatically.

    Here's the process:

    Click Start, run and enter in the box:

    services.msc

    Click OK to launch the Services applet.

    Locate the Windows Management Instrumentation Service.  If the status column indicates that the WMI Service is started (ongoing), right-click on the WMI Service and choose to stop the WMI Service.

    Answered in the affirmative, if requested to stop Security Center and Windows Firewall Services (with stopped services, your system is vulnerable to attacks from the Internet, so do not receive is not on the Internet again until you reboot your system).

    Now would be a good time to check also the properties of the WMI Service to make sure the startup type is set to automatic for the Service WMI will start automatically the next time the system is restarted.

    The Explorer, navigate to the following folder (assuming that your boot drive is C):

    C:\Windows\System32\Wbem\
     
    Locate and then rename the folder "Repository" to something, as you remember, such as:

    Repository.Old

    Restart the computer, and then make sure that the WMI service is restarted automatically and that a new repository folder has been created to replace the one that has been renamed.  It may take a while to completely rebuild the file storage (several seconds or minutes) so expect it ends.
     
    After the reboot, you will notice the wmiprvse.exe Service running in the Task Manager and it will continue to run until it completes the reconstruction of the repository (this may take a little time).

    The rebuilding process could take several minutes depending on your system, but eventually the wmiprvse.exe Service ends and disappear from the Manager tasks.

    If you then look at the Event Viewer Application log, there may be some error messages like this:

    Event type: error
    Event source: WinMgmt
    Event category: no
    Event ID: 4
    Description:
    Failed to load C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V4.0.30319\MOF\SERVICEMODEL MOF. MOF by retrieving the file from the repository.

    This is normal because when the system restarts, the wmiprvse.exe process has to rebuild parts of the repository as well. It is a mistake to sequence as shown below. You should not see these mistakes again after the system has been rebooted and catches up and finishes rebuilding the WMI repository.

    Explanations for errors encountered in the case of the Application of visualization of the newspaper the WMI repository is rebuilt:

    Explanation
    Windows Management Instrumentation could have tried to compile the file (mofcomp) a .mof marked for ASR, but compilation failed. This is probably due to a sequencing problem.
       
    User action
    To correct the problem, try to compile the .mof again. If this does not resolve the problem, contact the provider of technical support for the program in question.

    You shouldn't need to do something about these error messages and do not see again them after that XP has finished rebuilding the WMI repository.

    I can't say how long this will take to rebuild, maybe 10 to 15 minutes until it settles completely.

  • Receive the error message "the instruction at"0 x 00424590"referenced memory at"0 x 00000004", the memory could not be"written"." Error is received before the Windows logon prompt

    Receive the error referenced memory before you receive the logon prompt Windows session during the boot process.  Have replaced the RAM on the computer.  Windows Xp SP3.

    If anyone can identify the update that they think that may be the cause of the problem, you can navigate to the uninstall folder and determine what files have been updated.  If they can not start (except in the Recovery Console), you can also sort updates the date by using the dir command in the folder c:\windows (all $NtUninstall records).

    Problem is who writes all updates with Patch Tuesday comes around (say... it's today!-be prepared for positions "broken Windows my computer updates" start coming!).

    For example:

    When you install an update, first installation makes a copy of the files he wants to replace in the $ $NtUninstallKBnnnnnn... folder.

    That's why you can uninstall the update later.  Running uninstall the update will sometimes remove the updated files, then copy the original return files.  Sometimes uninstalling copy just the original preupdate on top of the most recent files.  It can also remove some registry keys, so Windows Update do not think you have more (look at the spuninst.inf file).

    Look at this update of security for example (KB950762) that updates c:\windows\system32\drivers\rmcast.sys:

    If you have installed, it will create this folder:

    c:\windows\$NtUninstallKB950762$

    You will have the front update file c:\windows\system32\dllcache\rmcast.sys in this folder since the installation of the update makes a copy of the original file for you.

    Then look at the file spuninst.txt spuninst folder and you will see what will happen if you need to uninstall the update:

    DEL "c:\windows\$hf_mig$\kb950762\sp3qfe\rmcast.sys".
    COPY 'C:\WINDOWS\$NtUninstallKB950762$\rmcast.sys' 'c:\windows\system32\dllcache\rmcast.sys '.
    COPY 'C:\WINDOWS\$NtUninstallKB950762$\rmcast.sys' 'c:\windows\system32\drivers\rmcast.sys '.
    COPY 'C:\WINDOWS\$NtUninstallKB950762$\spuninst\spuninst.txt' 'C:\WINDOWS\$NtUninstallKB950762$\spuninst\spuninst.tag '.

    In this case, uninstalling just copy the original file on top of the files that have been applied in the update, the spunint.inf updates registry tips and that's all.

    Notice that it also replaces the file in the dllcache folder too - c:\windows\system32\drivers\rmcast.sys is one of the 3498 drop that PAM cares everything (it's number 2500 in the list).  In dllcache files are backup files.

    If you were to access your drivers folder and rename c:\windows\system32\drivers\rmcast.sys to rmcast.lem, almost before you can Flash the 'missing' file will be replaced with the copy in the dllcache folder and you will see this in the event log:

    Event type: Information
    Event source: Windows File Protection
    Event category: no
    Event ID: 64002
    Description:
    File replacement was attempted on the protected system file c:\windows\system32\drivers\rmcast.sys. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5598.

    It is WFP in action and this means that WFP is working!

  • cannot download the current version of firefox because it says I don't have sufficient privileges. What it means and how to fix it.

    I keep trying to download the latest version of Firefox, but when I try to move it to the applications, I get the error message that I can't do this because "I have enough privelelges" and then I can't go any further. I don't know any more.
    The conjectures of educatd below are correct.
    Using a Mac
    This happens on my Mac to other institutions

    If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

    Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

    • Trash the present application Firefox to do a clean (re-) install
    • Install the new version you downloaded

    Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • When you try to install windows updates all I get is Error 8000FFFF, what it means and how to fix it?

    Error messages

    Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
    http://support.Microsoft.com/kb/946414

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

    iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

    You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

    At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

    Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

    If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

  • get an error message: "Web page Message: out of memory at line 6. can someone tell me what this means and how to fix it? Thank you.

    There is no real detail.  It started just happening tonight when I signed on.

    Hello

    1. what internet browser do you use?
    Hello

    1. have you made changes on the computer recently?

    Method 1.
    First of all I would ask you to uninstall toolbars and check. You can check in Add or remove programs in Control Panel.

    Method 2.
    a. refer to the article below for steps optimize internet explore. Check if the problem occurs without modules mode as explained in the article below.
    http://support.Microsoft.com/kb/936213

    b. If nothing works to solve the issue try reset Internet Explorer.
    How reset internet Explorer?
    http://support.Microsoft.com/kb/923737
    IE reset warning:
    Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

    I hope this helps.

  • When I try to install adobe Lightroom, it gives me the error that it is not able to create a "Lightroom Catalog" on the network volume. -What it means and how to fix it? I'm on a Dell with Windows 7 computer

    Lightroom Catalog error.pngThis is the error that is displayed. I tried to create a new catalog when the option appears when I click ok but this error pops up again whenever I try.

    Hello

    This means that the location where Lightroom is trying to create the catalog is on the network?

    Could you please try to create a catalog on your local hard drive and then check, as the catalog is not supported on the network.

    Kind regards

    Tanuj

  • I just bought 12 EP and get 1935 error when I try to install on my laptop. I don't know what that means or how to fix it. Any suggestions?

    How past tho Error 1935 to complete the installation?

    Try searching Google using "Error 1935".  It seems that it would be a problem with Windows with the software.

  • The memory could not be written the instruction at 0xf5e14843 referenced memory at 0xf5e14843.

    Original title:

    Task host error message

    I get this message on my laptop and reads "error Application Host task the instruction at 0xf5e14843 referenced memory at 0xf5e14843. The memory could not be written. Click OK to complete the program on stopping down.

    Hi John,.

    1. When exactly do you get the error message?
    2. Have you made changes on the computer before this problem?

    Memory could not be written can be caused by:

    • Faulty RAM.
    • Bad device drivers 'third' Party.
    • Too many apps, commissioning.

    Method 1:

    Diagnosing memory problems on your computer

    http://Windows.Microsoft.com/en-in/Windows7/diagnosing-memory-problems-on-your-computer

    Method 2:

    Try to review and remove the drivers 'doubtful '.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 3:

    Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See How to solve a problem by performing a boot in Windows Vista or in Windows 7

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 in the above article.

    Please return to the State of the question.

  • When I close Wordpad I get this error: "the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". »

    Every time I close wordpad in XP I get the same error message 'the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". "

    When I click OK to close this dialog box comes another upwards, back to "the instruction at 0x7c910a19 referenced memory at 0x01c801c0. The memory could not be "read". "

    I don't have any idea what is wrong. I tried to remove and reinstall wordpad but that did not help.

    original title: Error closing wordpad

    Hello

    Disable DEP (Data Execution Prevention) for Wordpad and see if it helps.

    a: Click on Start > run

    b: Type Control Panel in the Run dialog box and click on enter.

    c: then click on System , then Advanced System settings.

    d: then click on the settings button under Performance.

    e: Then click on Data Execution Prevention tab.

    f: Now select the option " turn on DEP for all programs and services except those I select. "

    g: now click Add , and then select Wordpad.exe

    h: click apply , then ok.

    Hope this information helps.

  • Svchost.exe - application error - the instruction at 0x7c919af2 referenced memory at 0 x 00000010, that memory could not be written

    Windows XP Professional and service pack 3 to have also internet exploror 8 install_ at startup I get this error message - the instruction at 0x7c919af2 referenced memory at 0x00000010 the memory could not be written

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/svchostexe-application-error-the-instruction-at/700e7092-7359-E011-8dfc-68b599b31bf5

    http://www.GeeksToGo.com/forum/topic/231828-0x7-errors/

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-message-on-boot-up-svchostexe-application/a1d7a2c2-2a9b-4145-A149-04ac389c0ffa

    Click on these links for possible solutions to your problem.

    Also, check out the related discussions, below your question.

  • I get the following error message "Windows - no disk Exception processing Message c0000012 parameters 75b6bf7c 4 75b6b7c 75b6b7c" can someone tell me what this means and how get rid of? Thank you!

    I get the following "Windows - no disk Exception Message c0000013 processing error message
    Parameters 75b6bf7c 4 75b6b7c 75b6b7c"can someone tell me what this means and how get rid of? Thank you!

    * UNPLUG ALL USB DEVICES AND NON-ESSENTIAL TO THE COMPUTER

    If you can, I suggest that you try the following:

    {THE PHASE 1}

    1. click on START
    2. click on "all programs".
    3. click on "Accessories".
    4. click on "system tools."
    5. click on "system restore."
    6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.
    {THE PHASE 2}
    If this does not work, I could do this:
    Reach:
    Follow the instructions to download the version (diskette) indicated secondary. This will require a floppy disk. If you don't have one available, skip this step. Unfortunantly, given the age of this system, they do not offer executable for use within Windows automatic update.
    {THE PHASE 3}
    Reach:
    Download the patch and install it. Then, restart your computer.
    Reach:
    Download the patch and install it. Then, restart your computer.
    Let us know what happens
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for