Error message: there was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

Similar Questions

• DLL from there was a problem starting C:\Users\Carol\AppData\Roaming\wupdate\pnpsql.soft the specified module could not be found

  This message keeps popping up how much - what I do?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the above mentioned error message. I would like to know information about this problem to help you better.

  (1) where do you get this error message?

  (2) that you get this error message while opening any application?

  In the meantime, please follow the following suggestions to solve the problem.

  First of all, start the computer in safe mode and see if the problem occurs in safe mode.

  Step 1: See the link to start in safe mode.

  Startup options (including safe mode).

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .

  In addition, open the link and follow the instructions to get the event logs, so that we can see which application is defective.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• "RunDLL" error starting with a message "there was a problem starting C:\Users\Patti\AppData\Local\Temp\MicrosoftGames\djdhrmx.dll.

  Whenever I start my laptop I get a "RunDLL" window with a message "there was a problem starting C:\Users\Patti\AppData\Local\Temp\MicrosoftGames\djdhrmx.dll the specified module could not be found."  How can I solve the problem and stop this message from appearing?

  original title: RunDLL

  Chooses a different path by doing a system restore. For me, it was a less complex approach. In any case, thanks for your response.

• I just started getting this error message: there is a problem starting c:\Users\username\AppData\Local\Temp\stppvxe\starvfn\wow.dll

  I just started getting this error message:

  RundDLL

  "There is a problem starting

  c:\Users\username\AppData\Local\Temp\stppvxe\starvfn\wow.dll ".

  the specified module could not be found

  The computer seems to work ok and selecting ok will leave the error, and allow the user to continue.  Any suggestions on what this could be and how get rid of?

  Thank you

  Danielle

  Original title: starvfn\wow.dll

  Hello

  Thanks for posting in the Microsoft Community.

  The description of the issue, you get wow.dll at startup. I'll be happy to help you on this question.

  1. don't you make changes to the computer before the show?
  2. when exactly you get the error message?

  This problem can occur if the waw.dll file is corrupted.

  Method 1: I would say that you run SFC scan. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: I suggest you perform the clean boot and remove the program that is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow how to reset the computer to start as usual after a repair by article KB929135 clean boot to reset the computer in normal mode.

  Method 3: This problem can also occur if the computer is affected by the virus.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• RUNDLL error loading C:\Users\Gail\AppData\Local\Temp\fontftp.dll the specified module could not be found

  This message appeared on start up after I installed my new printer. How can I get rid of him? Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This is the probably the result of malware then do a very thorough check and when the
  the system is clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Start error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found."

  Original title: run DLL error message

  When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found.  I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found.  I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking.  Thanks for your help.

  Hello MaureenCYB,

  Thank you for the question!

  I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• {I get the message: there was a problem starting C:\Users\jbondjbond\AppData\Local\Google\{F068CE0-714C-4 55F - 8A 56-F54EE47CB100} \qfjcfre.dll

  {I get the message: there was a problem starting C:\Users\jbondjbond\AppData\Local\Google\{F068CE0-714C-4 55F - 8A 56-F54EE47CB100} \qfjcfre.dll the specified module could not be found.

  This happens every time I restart the computer.  I tried to uninstall and reinstall Google Chrome which is the only Google on the computer.  It did not help, I still have the problem.

  Hello
   
  It seems that you receive an error message at startup 'there was a problem starting.
  C:\Users\jbondjbond\AppData\Local\Google\[F068CFE0-714C-455F-8=A56-F54EE47CB100]\qfjcfre.dll. The specified module could not be found. ».
   
  -What operating system is installed on your computer?
  -Do you have Google products installed on your computer? (Picasa, in car)
  -Did you do changes on the computer before this problem?
   
  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• There was a problem starting: c:\user\username\appdata\local\temp\80980150.txt

  original title: Windows error that has annoyed me for a while.

  There was a problem starting

  c:\user\username\appdata\local\temp\80980150.txt

  The specified module could not be found.

  This is the error I get whenever I boot windows and I think it may be related to a problem I was. Most of my prefrences recorded for windows is not in working condition (as my taskbar is not able to change the settings). I have scowered the interwebs for a response, even using Google and even * shudder * Bing. My Riddle has baffled many, can someone help out me?

  I have consulted the temp folder and this particular text file is not present. Maybe if I create a new one, it will work? I'm not to try it again, but if someone could confirm that I would be much happier!

  I don't know any reason that Windows must be looking for a text file to start.  You can create a file in this location, but I think it would be better to use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information on how to use the Autoruns, please see:

  Autoruns for Windows v10.01 Windows Sysinternals Autoruns Forum
  Advanced Malware cleaning

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Get the error at startup - there was a problem starting c:\users\josh\appdata\local\temp\

  This happens every time I start my pc, tried this already http://www.justanswer.com/computer/3po6u-rundll-problem-starting-c-users-michel-1-appdata-local-temp-5555d6be-cc91-4.html of other ideas out there?

  You do not use Registry cleaners, doing so can have unintended consequences

  No doubt you've run Disk Cleanup?

  Clean the PC boot and follow the diagnostic options msconfig exposed

  http://support.Microsoft.com/kb/331796

• "There was a problem starting c:\users\george\appdata\local\conduit\backgroundcontainer\gackgroundcontainer.dll.

  Original title: RunDLL error

  "When I start my pc, I get an error message that States,"There was a problem starting c:\users\george\appdata\local\conduit\backgroundcontainer\gackgroundcontainer.dll"the specified module could not be found. Can anyone help?

  Rohit lydie

  Thank you for your time/help! Before I read your posts, I had found a response which, so far, has corrected my error.

  Respectfully,.

  George

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/error-message-on-start-up-Windows-8/7f29c7ad-2d55-4f1c-8110-ddca3902f596

• In Vista, get a DLL error on reboot, 'error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll. The specified module could not be found.

  On reboot, I get a RunDLL message "error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll.  The specified module could not be found.  How can I fix?

  Hi MelP1802,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the mention of steps in the Microsoft article and lets us know if the question get it fixed.

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Method 3: Also I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information helps.

• Get error in Vista, error loading c:\Users\Marie\AppData\Local\usbcrtRpl\sysWebman.dl lthis specified module could not be found

  Recently received a message from RunDLL when I start.

  Error loading c:\Users\Marie\AppData\Local\usbcrtRpl\sysWebman.dl lthis specified module could not be found.

  Ive already scanned for malware using Malwarebytes found nothing.

  What should do? Help, please. Thank you in advance.

  * original title - how to get rid of the error message at startup upwards *.

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error loading C\Users\Owner\App Data\Local\Temp certqueue.dll the specified module could not be found

  I had problems with unwanted stuff appearing in internet explore and reset windows to get rid of it. Now, I get this error message when I start my computer. Please help me solve this problem. I am running Vista Home Premium. Thank you very much

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why do I get an error message saying "the specific module could not be found" when opening an image?

  original title: RunDLL

  I get the window followed whenever I click on an image or a file:

  There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found

  Can anyone advise on how to fix?

  Hi Jim,.

  I suggest you to navigate to the location of the file in the error message and check if it doesn't matter what suspicious file is present. There could be opportunities that your antivirus software would have deleted a few infected file, but would have left a few remnants, which is the origin of the problem.

  I suggest you use Microsoft safety scanner and look for viruses in your computer.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Here is the link to launch the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Let us know the State of the question, so that we can help you.

• HP27-k350xt:. On each startup, I get this message. "There was a problem starting C:\Users\bulldog2u\AppData.

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  BULLDOG2U wrote:
  

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  You don't want in this file.  Ads by Call Builder is malware that opens the ads on your computer.  If you encounter this error, then it is likely that you have an antivirus/antimalware program which was removed from your computer, but left the startup item.  More information on Call Builder, and how to remove can be found here.

  To remove this item from your startup list, follow these steps:

  System (Windows 7) Configuration utility

  1. In the start search box, type MSCONFIG and press ENTER.
  2. Click the Startup tab.
  3. Uncheck the items you want to run at startup.
  4. When you have finished your selections, click OK.
  5. In the box that appears, click on restart to restart your computer.