Error message "unable to save all the components of the file...". The file is damaged or unreadable.

Similar Questions

• Error message: unable to save this article before you save the header entry

  Hi all

  I'm trying to insert data into the table of okc_k_processes using an API. When I run my application, I get this error message: unable to save this article before you save the header entry. I tried to open the API package body and locate the error but could not find it. How to solve this?

  Thanks in advance.

  3065204 wrote:

  No, there is no trigger on the table. But what he really tell by the error and to save the header entry?

  We do not know your code, and we do not have access either!  So, how are we supposed to know what a particular error message?  You can not save the ticket before you save the header entry is NOT an Oracle error, it's a validation error request that someone who wrote the API set.  We can only guess why you get it.

  Your API call should be to create a detail record and requires that you create a header record.

  The validation is

  • okc_contract_pub.create_contract_process and one of its dependencies
  • pa_interface_utils_pub.get_Messages
  • a trigger on a table.

  run the following

  Select *.

  from ALL_SOURCE

  where the TEXT like '% you can not save this entry before saving the header entry %.

  and you'll probably find where.

• Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  I get this message trying to install a Canon printer

  Jim

  A few quick questions for you:

  • What printer model
  • Have you tried uninstalling and reinstalling the printer
  • You, the drivers are up-to-date

  You can try and run the difficulty he tool and see if that solves your problem

• Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

  Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

  You are not allowed to write to the specified folder.

  CHEK your access privileges.

  Also: in case you save to a network: do not.

  Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

  If you need additional assistance, please we say system and version of Illustrator and where you want to save.

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• I'm unable to save all the files on my pc which runs with Vista Ultimate operating system

  I'm unable to save all the files in any application. The dialog box type of flickers in the background, but nothing happens.
  Happens if I am recording a chart on the web using a web browser. Happens when I create a file in Excel or Word, Paint, and Serif (possibly other applications which I am not using at the moment) and then click on "Save as."

  It happens if I opened a pdf file from any source (be it on my drive hard or on the web) and click on "Save as" to save another copy.

  It happens when I'm using a web-based e-mail service, and if I want to add an attachment, as soon as I click on the Upload button, nothing happens.

  It happens when I try to export a scanned image of my scanner, to a file.

  I get no error with the exception of this shimmering when one would expect to see a dialog box.

  But, it happens when I create a new file in Notepad, which is a weird exception

  It started to arrive 3 days ago, and I have not loaded any new software changed the settings I can think. (with the exception of mcAfee who has downloaded an update almost everyday)

  I restarted my computer several times since and searched the net to find answers, but it seems I'm the only one afflicted.

  I would appreciate if someone can shed some light on this.

  Thank you

  I ran scandisk and check sfc, but that did not help. Instead of trying a system restore, I tried the opposite: installed at every possible update available.
  Result: Problem solved!

  I installed 14 updates:
  KB974306
  KB976325
  KB905866
  KB943729
  KB960362
  KB969058
  KB971512
  KB971514
  KB972036
  KB975364
  KB976470
  KB933713
  KB971513
  and Windows Internet Explorer 8

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• Error message "unable to connect to the proxy server.

  I use Google ChRome as my browser. Unable to connect to the Internet. Error message "unable to connect to the proxy server. I went to the settings and tried to change the proxy settings. When I uncheck the box "use a proxy server" it does not apply only change.when I click OK, it always comes back to the box is checked.

  Chrome uses the Windows / IE settings proxy as do most of the browsers.

• Error message on Windows XP, "Windows-Delayed Write failed, windows was unable to save all the data for the file.

  I use windows xp as the operating system. I bought the new 3G huawei data card. While surfing internet, between a pop-up is displayed

  «Windows-delayed write failed, windows was unable to save all data in the file C:\Documents and settings\new\Local Settings\Application Data\Google\Chrome\User Data\Default\Session Storage\004285.log.» The data has been lost. This error can be caused by a failure of your computer hardware.

  After this computer freezes and I have to restart my computer. Please help me how to fix this problem.

  The error basically says that he tried to write something on your hard drive and for some reason that unfinished write operation.  This could indicate a bad sector on your hard disk, damaged disk or a problem with your hardware.

  Whenever a problem involving a disk read or write appears, my first approach is to perform a verify operation of the disc to the hard drive.  Even if this is not your problem, it is a step of good routine maintenance. Run the disk check with the "/ R" or "Repair" option.  Note that the real disk check will be presented at the next reboot, will run until Windows loads completely, cannot be interrupted and can take more than a few hours to run depending on the size of your hard drive, the quantity and type found corruption and other factors.   It is better to perform during the night or when you won't need your computer for several hours.

  'How to perform disk in Windows XP error Cherking'

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• Cannot install Trend Micro 2012, receive error message: "your computer meets all the installation requirements, so Setup must stop."

  Original title: Problems installing Trend Micro 2012

  Tried to install Trend micro on my laptop, and towards the end of this way the message; "Your computer meets all the installation requirements, so the installer must stop." appeared. He then read "Windows update," I clicked on the link and also called microsoft who gave me the link updates from SP1 to SP2. I did (ran for almost 2 hours!) and recorded. I then checked the edition of windows under system and it has not saved the update even if it is registered and installed to my files. Tried to do the foregoing twice, still the same problem. Rang Dell and they sought to find an answer to the problem, but did everything they could. Still no answer to the problem after all. I have Windows Vista Home Basic as my operating system and installed Trend micro in the past with no problems. (Not sure if the following has nothing to do with it, but thought it might be useful a mention). I changed to Microsoft Office 2007, which has already been installed on my laptop for Office 2003, because I found it difficult from the laptop to the desktop and I didn't really want to pay for the upgrade of my office, if I didn't need it.

  Hello

  You need to install Trend Micro Titanium 2012 Vista SP2 or later version

  See this: http://support.antivirus.co.UK/trendmicro/kbresolution.jsp?Hmid=53756&ServiceId=51&ApplicationId=345

  I suggest you follow these methods and check.

  Determine if SP2 has been installed or not?

  To see if the update has been installed, review the installation history

  To view the history of installation, follow these steps:

  a. click Start, point to all programsand then click Windows Update or Microsoft Update.

  b. click view update history.

  c. find the latest entry for the specific update.

  d. If the entry shows the success in the status column, the update has been installed. If it says pending in the status column, the update is not installed.

  Post back with the history state of Windows update, mistakes, if there is.

  If the update is successful, if it does not show in system properties run System File Checker tool.

  To do this, follow the steps in this link:

  Follow the steps in this link: http://support.Microsoft.com/kb/929833

  In the meantime, you can check this link for the required components, that you must take to install the Vista SP2. Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/is-is/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Also these return these items:

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.microsoft.com/kb/2438651

  I hope this helps!

• When I send an email-error message says cannot save in the folder

  do not save my emails sent in the sent folder. When I click on send a new email... I get an error message that says: it can not save to the sent folder. Just started using TB yesterday.

  I have a similar problem, except that my progress bar never stops. The last thing I should read is message saved in the sent folder. If I close the window, the message does not appear in the sent folder. I must tell you that I've been using Thunderbird for several years now. Since yesterday, it was working fine. Now it isn't and that left me scratching my head.

  stevecc

• Unable to connect to the servers of SnapChat. IOS 4.2.1. iPhone 3G. Error message: unable to connect to the server. Please try again later.

  Hello

  I can not connect to servers SnapChat

  IOS 4.2.1

  iPhone 3G

  Error message:

  Unable to connect to the server. Please try again later

  Thank you for your time and understanding.

  Hello!

  It seems that you can not use your SnapChat the way app which you should be. I would use the troubleshooting steps in the following article for third-party applications. You may well reach out to the developer if the problem is not solved by the article though:

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

• BPEL 2.0: Error Message referencing to catch all the

  Hi all

  I have a BPEL 2.0 process in which I have a Catch all. What I would like to make is the reference of the error message that is to be taken and do something with it. I know that this can be done if a specific failure but I would like to use Catch all. is possible to do?

  Thank you

  Bill

  Hello

  All the sockets, you can get fault as ora: getFaultasString and then send back them to do something with it.

  Thank you

• Error message: "unable to connect to the RPC Server" and no internet connection.

  Original title: recently installed a program of pc cleaner. Seemed to really speed up my laptop that is running Windows XP.

  After two days I try to connect to the internet and no connection lie. Uninstalled the pc cleaner without problem but the problem continues to exist. All tests, etc., result in "unable to connect to the RPC server. Slide short drive and reinstall XP, are there any other things to try?

  Hi Wantamustang,

  You can try the following steps and check.

  You can set the remote procedure (RPC) call Service to start automatically:

  a. clickStart, point to settings, clickControl Paneland then double-clickServices.

  b. in theservices list, click the remote procedure (RPC) call Serviceand then clickStartup.

  c. underStartup Type, click Automaticand then click OK.

  d. restart your computer.

  You can also consult the following article:

  Windows wireless and wired network connection problems

• Free trial error message "unable to crΘer the required/folder/users/Bobsimac/library/application support/adobe/lightroom/develop presets.

  downloaded the trial version free, when I try to open Lightroom I have two error messages. 1 - an error has occurred when attempting to change modules.  2. failed to create the required/folder/users/Bobsimac/library/application support/adobe/lightroom/develop presets. can anyone help.

  Hi traveler,

  Please, try the steps in the link provided by Franz Leu.

  > You can also try to rename the folder Lightroom in the Sub Lightroom.old rental.

  /Users/Library/Application Support/Adobe (i.e.: ~/Library/Application Support/Adobe)

  > Restart Lightroom and look for the question.

  Let us know if that helps.

  ~ UL