Error message: unknown connection state. The dependency service or group was able to start.

I installed Office 2010 on my computer with Vista and now can't connect via cable or wireless.  I get the error message: unknown connection status. The dependency service or group was able to start.  I know that the router and the wireless work.  I tried several of the mentioned patches, but nothing has worked.  My Verizon card works.

Hello Chelen,

I suggest you visit this Microsoft TechNet thread where they discuss the same problem you are having:
This response may be useful:
"I also had the same problem and the solution above does not work.

My problem was caused by corruption in the TCP/IP stack

To fix, you need to run a command as administrator prompt

Start > all programs > Accessories > prompt (right click and run as administrator)

At the command prompt, type: netsh winsock reset

"Ignore all errors, restart and voila'.

Tags: Windows

Similar Questions

  • The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

    the dependency of the orgroup faaied to start service unknown Internet connection.

    The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

    Hello

    ·         You will remember to do recent changes on the computer before this problem?

    ·         Is the question only for the icon network did you try to open a Web page and check?

    ·         What suggestions do you have tried?

    ·         What is the exact error message?

    ·         Have you tried all the steps from the link?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

    I suggest you follow the steps mentioned below:

    Method 1:

    Follow the steps in the link and check if the problem persists:

    http://support.Microsoft.com/kb/943996

    Registry warning:

    This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2:

    If the previous step fails, follow the steps in the link and check if the problem persists:

    http://support.Microsoft.com/kb/936211

    Method 3:

    If the previous step fails, reset WinSock and check if the problem persists:

    http://support.Microsoft.com/kb/811259

    Registry warning:

    This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 4:

    Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

    Note: make sure that you enable the antivirus software, other security and firewall programs.

    Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

    original title: cannot share internet

    I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

    "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

    Hello

    You can view the article in the Microsoft Knowledge base and check if it helps.

    Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" "

    http://support.Microsoft.com/kb/946481

    Let us know if you need more assistance.

  • Connection status: unknown. The dependency service or group was able to start.

    Greetings!  I have a year old Dell Inspiron.  Everything worked fine last night, but when I woke today I couldn't connect to the internet.  When I put the cursor on the network icon, it says "connection status: unknown."  The dependency service or group was able to start. "My Windows Firewall is also disabled and I can't activate it automatically or manually.  In addition, the Windows Diagnostic tool cannot be turned on, and whenever I try to activate the Diagnostic Policy Service it also can not be done. It says "error 5: access is denied" when I try to turn it on manually.

    My antivirus (Avira) software is fully up to date from last night.  I even took it into Best Buy and they did a diagnostic test to ensure that a virus is not the cause.  The guy there said it was a software problem.  I tried resetting TCP/IP (netsh winsock reset) without success.  I also tried sfc/scannow in safe mode and windows without success.  Are there other options?

    Thanks in advance.

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    See you soon.

    Mick Murphy - Microsoft partner

  • [Windows 8.1] Limited Internet access + the dependency service or group was able to start the PROBLEM.

    So I have this problem for a long time . I can connect to the internet, but it says limited. It works perfectly fine but the computer says that I am not connected.  I don't know what are the causes that. Troubleshootin g can't find any problems. Also when I go to network and sharing Center , he said:

    Unknown

    The dependency service or group was able to start.

    Thank you: D-Patrick

    Please run a check of system files (SFC) & DISM if you're on win 7 or higher 

    All instructions are in our Wiki article below... If you have any questions please ask us.
  • install problem - c:\users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe the dependency service or group was able to start

    I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:

    I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:

    c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
    The dependency service or group could not start

    Any ideas?

    You may need to temporarily disable your security software (antivirus).

  • The dependency service or group was able to start. DHCP client service.

    My computer will basically not connect internet by cable or wireless. Network adapters seem to have gone haywire. Ive done several system restores and even a sfc has to analyze in the command prompt. He said "Windows resource protection found corrupt files but was unable to solve some of them. Details are provided in convertible bonds. "Journal >" etc.
    It would seem that I corrupted with Vista. If I restore these files or what I have to do my second recovery system? Any help would be appreciated.
    Thank you.

    Hello

    ALU is ASUS Live Update, so you should check with the manufacturer ASUS and system and/or generator as you have
    in fact to be material errors.

    ------------------------------------------

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
     
    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • "dependency service or group was able to start.

    I have a laptop with vista. my wireless connection is explained by limited access internet and the icon in the launch area shows "dependency service or group was able to start.  I have internet, so I don't know what that means.

    Hello

    I suggest you to refer to this link and check if it helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-the-dependency-service-or-group-failed/2f8fb4c8-26f1-48E0-BC7F-7b0fa631fd26

    It will be useful.

  • Unknown connection status: dependency service or group was able to start

    I started getting this error a few days ago, and I've tried several different Web site solutions

    Replace the nlasvc.dll, as it was suggested that this had become corrupt. No solution.

    Reset the TCP/IP stack

    I ran sfc/SCANNOW in the administrator command prompt and it did not work.
    I tried this, then in Windows started normally and start mode without network safe.
    All to nothing does not.

    I don't have the Trend Micro Antivirus software installed.
    Initially I had Panda, but at random that no longer works, so I then installed Kaspersky.
    Everything worked fine for a while now, I have this problem, which is different from the other problem I had with Panda.
    I tried to uninstall Kaspersky, and still no internet connection is available.

    Any additional help / advide, greatly appreciated.

    Hi KarthiK TP

    Thank you for your response. Unfortunately, it came too late, and I'm done to restore factory settings.
    This solves the problem.

    Just to let you know, the step where we had problems is this awareness network (NLA) location. I was getting an error message whenever I tried this step.

    That this step did not work, I wouldn't have been able to run all analyses of the viruses online, as I had no internet access.

    In any case, I have Windows 7, if all goes well, it is more stable.

    Thank you
    JustineRMD

  • When you try to share my internet wireless connection I get this errordependency service or group was able to start

    When I try to share my internet connection, I get the following error. dependency service or group was able to start

    Hi Jason,

    1. What is the brand and model of the computer network adapter?

    2. How did you try to share the internet connection?

    Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest you make sure that the slot addiction services are enabled.

    a. Click Start, select run, type services.msc and click OK.

    b. to activate a service, look for it in the right pane, double-click its entry.

    c. do not forget its Startup Type is set to automatic, and then click OK.

    All the following services must be so configured to use ICS:

    Application Layer Gateway Service
    Network connections
    Knowledge of the network (NLA) locations
    Plug-And-Play
    Remote Access Auto Connection Manager
    Remote Access Connection Manager
    Remote procedure call (RPC)
    Telephony

    After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

  • Error 1068: Unknown connection status: the service dependency or groups could start

    Hi all

    I ave a problem with Vista service pack 2 running on Sony viao with the network. I have access to the internet, but my connection icon has a red X on it with the message "unknown connection status: the dependency service or group could not start". I did my homework to browse all the threads and have performed all of THE following conditions, but the problem persists.

    1. in the course of execution sys check through sfc/scannow

    2. reset TCP/IP through 1. netsh winsock reset 2. netsh int ip reset

    3. verification of all services such as the services in the list of networks and knowledge of network locations.

    However the problem persists. I cannot forget to mention that the list of Network Services and network location awareness not start I get the same error when I try to start them. I checked all the services above is dependent on and they are started and set to automatic.

    Is there anything else I can do to solve this problem other than the system of recovery or reinstallation? I have some stuff on my laptop that even if I save them I have given will be lost. for example the accounting software with its data, software for which I don't have the disk to re - install and the data in them cannot be saved on a server running. To make the story short, I really want to avoid recovery on the option of resettlement

    As I said, I have access to the internet, but the mere fact that this problem is there, its that bothers me and I don't want to run bigger problems later

    Any help would be greatly appreciated

    Thanks in advance

    Hi IMOMDS,

    1. don't you make changes before the show?
    2. have you checked if the network connections and support TCP/IP NetBIOS services are started?

    Try these steps and check the result.
    Step 1: Virus scanner online
    a. visit http://onecare.live.com/site/en-us/center/whatsnew.htm
    b. click Full Service scan and complete the scan.
    c. check the difference.

    Note: Use your favorite security software to search for viruses or malware on the computer and remove it.

    Step 2: If the problem persists, restore the computer to an earlier time when it was working fine
    a. see what is system restore?
    b. Once you have restored the computer, check if the problem persists.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Print Spooler error 1068: the dependency service or group could start. __

    I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

    Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

    When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

    Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

    Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

    You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

    Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

    Use the Applet of Services XP to check the dependencies of print spooler and options.

    Click Start, run and enter in the box:

    services.msc

    Click OK to open the Services Applet.

    Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

    You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

    Dependent Services may vary according to the type of printer that you have installed.

    The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

    If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

    Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

    Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

    When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
    questions.

    If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

    Click Start, run, and in the box type (including important space after the "equal" sign):

    dependent on the spooler of sc config = RPCSS

    Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

    If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

    Don't forget to restart and check that everything works correctly after each adjustment.

    Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

    The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

    Hello

    I still have the "system error 1068. The dependency service or group was able to start.

    "I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.

    I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.

    I tried "restart the spooler to print the title of the services, it does not, with the error message above.

    I have check the dependencies and it say HTTP and RPC

    I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started

    I went to regedit and found the keys as follows I don't know if its correct:

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]

    'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.

    "Group"="SpoolerGroup."

    "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

    74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

    00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00

    'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.

    "LocalSystem ObjectName"=""

    "ErrorControl" = DWORD: 00000001

    "Start" =: 00000002

    'Type' = dword:00000110

    "DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.

    70,00,00,00,00,00

    "ServiceSidType" = DWORD: 00000001

    "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

    00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

    72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

    00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.

    72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.

    00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.

    69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.

    00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.

    6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.

    00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.

    50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00

    "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

    00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00


    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]

    "Close" ="PerfClose."

    "Collect"="PerfCollect."

    "Collect Timeout" = dword:000007 d 0

    "Library"="winspool.drv".

    "Object list"="1450".

    "Open" = "PerfOpen."

    "Open Timeout" = dword:00000fa0


    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]

    "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.

    00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.

    00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.

    05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

    20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,

    01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

    I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.

    Any other advice would be greatly appreciated...

    Hello yan_dao69,

    I suggest that you try the methods below to solve the problem.

    Method 1:

    I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Ideally, this would set the print spooler service issues.

    Method 2:

    I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:

    http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

    Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

    Method 3:

    Check the dependency of the spooler services in the registry.

    a. Click Start, type regedit in the search box and press ENTER.

    b. look for, and then click the following registry key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

    c. right-click on spooler, click Export, save a backup file on your desktop.

    NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.

    d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.

    e. in the value data box, delete the other keys and then click OK.

    f. exit the registry editor.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Network is inactive: the dependency service or group could not start

    After you install windows vista sp1 on my new computer dell laptop, network lan connection is not active and when the mouse via the network sign in the notification area in the taskbar, the following error message appears:

    The dependency service or group was able to start.

    When you check the services, I found the following services should be started automatically but currently has started:

    DHCP client
    Network list service
    Network location awareness service
    NTRU TSS v1.2.1.27 tcs

    When you try to start one of them, get the error that the dependency service is not provided on except this one:

    Network location awareness, trying, start getting the following error: Windows cannt start local service...

    I checked the event log and found a number of errors like:

    -----------------
    Failed to initialize the Security Kerberos for authentication package on the server side. The data field contains the error number.

    -----------------

    The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

    --------------------------

    The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005. This is often caused by incorrect security settings in the process of the writer or the applicant.

    Operation:

    Data collection of Writer

    Context:

    Writer class ID: {e8132975-6f93-4464-a53e-1050253ae220}

    Author name: System Writer

    Writer Instance ID: {855aa7e1-4b71-4448-bae8-84e347d26b85}

    -----------------------

    Network list Service service depends on the network location awareness service which failed to start because of the following error:

    The service has returned a service-specific error code.

    --------------------------

    NTRU TSS v1.2.1.27 TCS depends on the TPM Base Services service which failed to start because of the following error:

    The service has not been started.

    -----------------------------

    The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

    And this last error repeats several times...

    Please help solve this problem as soon as you can, its really serios error.

    Awahaba

    This article explains how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista. It describes how to use the System File Checker tool to analyze and replace system files in scenarios where you are troubleshooting a problem in Windows Vista: http://support.microsoft.com/kb/936212/

    You might analyze you the computer to check for malicious software that could of damaged service this type are suggested anti-malware analysis: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

    Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

  • No Internet access. error 1747. and the dependency service or group could not start

    Have a laptop dell inspiron 1545 with vista (build 6002: service pack 2).  Have a wireless network at home.  laptop stopped connecting to the network 2 weeks ago.  When I try, I get a message "dependency service or group was able to start.  When I go to manage networks, there is no detected networks.  Cable internet access also does not work with this laptop. cards (minimap dell 1397 Wireless) wireless and ethernet say thet controller work correctly.  2 other laptops in the House are normally working on the network.  Reviewing service autoconfiguration WLAN and Wired AutoConfig and when I try to start the two ths get message... "Error 1747 the Authentication Service is unknown".  Another little thing, I noted... isatap.home don't works do not-message says to download the drivers- but not on net so cant)... don't know if this is related.

    can you help me?  Thank you, Aodhanm.

    I just wanted to post that I used the

    netsh winsock reset

    command to fix this same error 1747 known when you try to manually start the WLAN
    on a Windows 7 Pro computer.

    After a restart it worked fine.

    Chuck
    NerdForce.com tech

Maybe you are looking for

  • Chargers apple has a warranty on them?

    IF I buy a charger from Best Buy, it will be guaranteed? Or do I have to buy it from Apple? Can I get a warranty on this subject if I just bought a charger?

  • How many times should I empty the cache memory?

    I had problems with various Web sites and on other users advice made a full cache clear. I noticed an immediate improvement in the speed of loading pages. Do you have this help and if yes how often should I clean the cache? It is 420MB. Thank you

  • advance and rewind no longer works after update tvOS

    After the update to 9.2 today on my Apple TV 4, fast forward and rewind (wash/running finger on the trackpad on the remote) stopped working. Does anyone else have this problem or a solution? I can use my voice to tell Siri skip ahead x minutes, but I

  • How to use a 2nd partition to store data?

    The 40 GB HDD on my satellite L10 comes with two 20 GB partitions (C and D drive). I understood (by reading this forum) that it is better to use a partition to store the data. So far, there was no need to use the D drive. But now I need more space. H

  • Install IIS/PHP on Win Server 2008R2

    I am building a Web server with PHP support. I'm trying to install PHP 5.5.15 (NTS) on Windows Server 2008 R2, using IIS 7.5. I installed all the up-to-date available/updated service packs to Server 2008. I downloaded the installer msi Windows from p