error message when the user after boot entry

Similar Questions

• We get a blue screen with no error message when the user arrives in the morning... but not every day.

  Have a user who was the bluescreen with no error message when she arrives in the morning. This doesn't always happen.  But when it does, it must do a hard boot of his computer. It runs XP SP3, and it is on a domain. Another user reports what is happening also, but not as often.

  Yet once, it is not consistent where it happens every working day. It's maybe 1 or 2 days a week, if that. Hibernation is disabled and power options are set to never turn off.
  If this is not enough information, I will be happy to provide more if necessary. Any contributions to this issue would be appreciated.
  Thank you

  This may apply . But this message does not resemble a BSOD / crash

• Turning on the laptop computer error message reads "the user profile Service service has no logon. __

  The error message reads "the user profile Service service has no logon.

  User profile cannot be loaded.

  Thanks have tried but can't boot from a fix it for me or set me.

  Go to Safe Mode with networking

  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Mode safe mode with networking

  You can log into your own account in safe mode?
  If so, you remember the date when you did NOT have this problem?
  If so, this date no more than 10 to 15 days ago?
  If so, again, please do a restore of the system in safe mode.

  How to restore the system:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Once completed, restart your machine and see if you can log in to your account in NORMAL mode.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• 0x8100000A error message when the backup fails.

  When my system tries to make a regular scheduled backup, I get the following error message:

  The backup has failed.

  An error has occurred. The following information can help you to resolve the error:

  The last backup set cannot be found. Make sure it is accessible and it has not been deleted. Otherwise, create a new full backup. (0x8100000A)

  How can I fix it?

  I use Windows Vista Home Premium on an HP computer. Thank you.

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Unlike what you said here, Vista Home Premium does NOT have a backup of the computer.
  Read the info in the link above from Ms.

  You need Vista Business or Vista Ultimate or Enterprise Vista for backing up the computer.

  Make the backup file.

  See you soon.
  Mick Murphy - Microsoft partner

• Error message when the registration of the work

  I have Mac OS X El Capitan 10.11.3 work in Photoshop and using the Liquify tool. I can perform the task, but when I hit the ok button to save, this error message on the screen: "the operation could not be complete, a permissions error writing has produced., any recommendations?"  Thank you

  Please take a look in the following thread: not on CC save fluidity

  It seems a similar problem.

• Error message when the installation of PES 11

  I keep getting an error message at the end of the installation of PES 11 and then it cancels installation and sends me to the troubleshooting. I tried all the steps in the troubleshooting but nothing helps, what to do next? Any suggestions?

  I have a PC running Windows 7. Everything is up-to-date. Thanks for any help.

  What is the exact error message?

  Here are the troubleshooting steps you have already tried?

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation-Photoshop-elements-premiere.html#main_Installer_freezes__closes__or_returns_an_error

  Nothing in the logs of installation?

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Report - Warning Message When the user clicks on the link with the value 0

  Hello
  
  I have a report with several areas, for example. Year, high priority project manager, County of medium priority project, project manager of low priority.
  I used column attributes to bind the data of the report on page 22.
  
  
  
  Now, some cells in the report have 0. Isn't it possible that when the user clicks on 0 binding doesn't to page 22, but see the window alert javascript indicating no data.
  
  
  Any help will be much appreciated.
  
  
  Kind regards
  Shijesh

  You can take a look at the following page

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:228

  to see how this is possible.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• error message when the location of my pictures (Google maps)

  Excuse my bad English, I'm french! When I try to inform them of the location of my pictures in IPhoto, using Google Maps in the Info window, I get this message: "Oops!" something was wrong. This page has not properly loaded Google maps. See the JavaScript console for more technical details"

  What can I do with Java script?

  Thank you for your response.

  Contract of Apple with Google to use Google maps with locations of the pictures in the iPhoto library has been cancelled a few months previously.  That's why iPhoto 9.4.3 and earlier can no longer access the Google map servers and get this error message.

  If you use iPhoto 9.4.3 or earlier you can stop the fracas in the following manner, but will lose the mapping functionality in the library.

  iPhoto 9.4.3 and earlier began planting for many users suddenly a few weeks ago. This is because the contract between Apple and Google for the use of Google maps with iPhoto 9.4.3 and earlier sites expired an elderly couple of months and was not renewed. This is the case of him freezes or crashes.

  Now uses Apple its own program for locations maps and too the use you need to run iPhoto 9.5.1 and Mavericks or 9.6.1 and Yosemite El Capitan or Photos and El Capitan.

  Try Huxly647Solution:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon

  I found a solution that works for me.

  1 goto /Applications/iPhoto.app/Contents/Resources (control (right) - click the iPhoto application and select the content in the context menu - OT.)

  2 delete the files 'googlemap.html' and googlesearch.html

  iPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  There is a notch posted by user cotton-x that will let iPhoto 9 and earlier still use Google Maps for the purpose of the location.

  cotton-x

  16 December 2015 14:49

  Re: iPhoto 11 - problems with Photo locations

  in response to Paul Fisher

  YES!

  I did just the job.

  I'm on a macbook running white 10.7.5 with iPhoto 9.4.3

  Thanks to Paul, I got an idea. What happens if we had simply ignored Apple has expired API and used our own, private and free from Google. Turns out it works.

  Here's what you need to do:

  0 - quit iPhoto

  1. create a google account or use your own

  Console developers of Google 2 - access HERE

  3. create a project (any name)

  4 - turn on a Google Maps Javascript API

  5 - generate your own API key

  6 - go to the folder /Applications/iPhoto.app/Contents/Resources/googleMap.html

  7. change the googleMap.html (I used an application called TextWrangler)

  8 change the src ="http://maps.googleapis.com/maps/api/js?v=3 & client = gme-appleinc & sensor = false" > to this src = 'https://maps.googleapis.com/maps/api/js?key=YOUR_KEY_HERE& signed_in = true & sensor = false ">"

  9 - save your freshly edited googleMap.html

  10 - open iPhoto and enjoy.

  Take the Apple.

  

  Don't forget to make a backup copy of the iPhoto application before performing this procedure.

  

• Error message when the printer - new message, old printer connection

  Hey, Dell forums. Me am a little a problem and, well, I have no idea how to solve this problem. I hope someone can help me.

  Technical care first of all: the computer in question is an IBM Thinkpad R51 laptop running Windows XP Professional SP 3. The printer is a Dell all-in - One 926. They were also well used together for a long time and never had a problem until now.

  A month ago, we bought an ereader. When I plugged it in, I got an error message. I thought, until I plugged in again and received the same message. I was going to just deal - until I tried to use my printer and got the exact same error message. At this time, I restored my computer to until I installed the ereader. I plugged the printer back in once it has been done and does not see a problem, so I thought it was fixed.

  Today, I reconnected my printer. I had some problems with it - he was constantly printing quality rough and then kept insisting there were bands on the cartridge, but I have not tried to print something with her since then plug it in to check the error message - and I wanted to see if she would print. As soon as it is plugged in, the error message there. He is come twice, in quick succession - I hit Cancel and other pops up immediately and I hit Cancel again, that the first time through this message and the ereader has shown me that it was the only way to stop.

  It comes in I got the error message: Application popup: Windows - disc no.: Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Scanned, printed and another image scanned into the computer very well after that. I can't restore before you reinstall the ereader - this point was erased by the computer, creating automatic points. Whatever it is, it seems does not solve the problem. It was the same usb port that I always use to plug in the printer, and I did the same as I always have. The only things I've done since the restoration has been updated Windows and things like Java and Flash.

  Someone has advice on how to solve this error message so I do not understand whenever I use my printer?

  Phenyx,

  You can copy a document under the glass? No computer is needed to do this correct?

  I would try reinstalling the printer by following the instructions below.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 926 Photo all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Error message when the chm file is opened and opening topics/links

  Hello

  I am a user of RoboHelp 10 and tried to generate HTML Help. When I try to open the chm file, you receive the following error message. When you click Yes or no to clear the error, it opens OK. The error message also appears WHEN you click a hyperlink in the project or open a topic.

  I use Windows 7 and have a computer laptop 64 bit.

  

  Of course as it seems!

• Image mask Error Message When the reduction in size of the PDF

  With my Mac, I include jpg images in Microsoft Word documents, save them as pdf files and reduce them. Reduced size often fails with the error message "The PDF content document image masks which were not sous-échantillonnées".  JPEGs don't have masks, so I have no idea how to solve this problem, and a thorough search of google was no help.

  Use PNG images instead use an application like converter of graphics, Fireworks to convert .png to .jpg.

  Will be much better images that degrade not every time that they are open and more often they end up being of same size as jpeg format

  JPEG unless you save it as a special type is a lossy format, and each time is open (and unzipped) and closed (and then compressed) details of losses

  Just open and enlarge an image jpeg after its been open 5 - 20 times you notice one out of the halo update similar looking for water discharged on paper wil pen ink on this subject. And it get worse gradually. PNG however is not fixed and if the original is saved as png never degrade even when reduced in size or or expand within reasonable limits in size.  I have in dealing with photos screenshots, pictures and others for years. Despite what others may say on this list can say if you want a picture with little bad for years of service save in png.

• Error message when I install After Effects

  Hey guys, please help me

  I want to try the 30 day trial of After effects trial version I install it in creative cloud and when it gets so I'm getting an error message...

  I click on it, then it is a table like this:

  Exit code: 6

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: Package redistributable Microsoft Visual C++ 2010 (x 64) 10.0.40219.1 {9D2A060F-AC6B-11E0-8C00-00215AEA26C9}.

  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code: 1603

  ERROR: Cannot install the Package redistributable Microsoft Visual C++ 2010 (x 64). Please try to install by double-clicking the executable file to "E:\Adobe after effects CS6\payloads\Microsoft VC 2010 Redist (x 64) \vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x 64) Microsoft Web site - www.microsoft.com

  I got the same Probs on C++ 2008 but I reinstall so I had no problem, but I can't reinstall it on C++ 2010 is when I try it tell me that I'm more C++ 2010 on my computer and I install a new version then I install but when I install a new version, it tells me "error during installation. : on your computer, there is a new version...

  WTF?

  When I opened my system Panel > programs and features, there is no Microsoft Visual C++ 2010 NONE of this, I just 2005 2007 and 2008 and it works!

  But I don't have any Version of 2010 Visual on my computer I can't install or reinstall it I can't do anything with the 2010 Version so I have the problem also install After Effects :/

  Please help me guys and sry for my English im from Germany but I tryd it anyway to write my problem here and please do not respond so complicated

  Thank you

  See the following help document:

  Exit code: 6, Exit Code: 7 Installation errors.

  http://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html

• Error message when the installation of drive/Flash Player

  I get the message "an error has occurred in the script on this page" when trying to install Reader and Flash Player.  Windows XP Pro 32-bit, MSIE8.  I am running Windows in Boot Camp partition on an iMac.  I enabled in the Internet Options of script.

  Additional information in the error message window:

  Line: 1

  Char: 13054

  Error: Object EXPECTED

  Code: 0

  URL: http://127.0.0.1:2220/app/_js/adobe.js

  What does that mean?

  Download and run the installation offline programs

  • Adobe Reader: http://get.adobe.com/reader/enterprise/
  • Flash Player: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player-Windows.html #main - pars_header

• Help - error message when the output

  

  Dear members of the Forum,

  Could you please help me solve the following problem?

  I have a project in Adobe Media Encoder CS3 format MPEG2-DVD release and ended up with two files: 'movie.m2v' video and audio file 'movie.wav '. Then I grab these two files as 'calendar' in Encore CS5, did the menus, etc. After reviewing the project to find errors, none was identified and I went under construction the DVD disc. In the process of strengthening of the following errors occurred:

  "'The Movie' PGC has an error at 00; 01; 24 20.

  Internal software error: 0%, The Movie Info line: name = The Movie,.

  REF = Bpgc, time is 00; 01; 24; 20'

  When I play the movie in again, no error occurs at the point specified above time (00; 01; 24; 20) - there is a transition crossdissolve at this point.

  Any ideas how to solve this problem, or probably help how interpret the error message?

  Thank you!

  For some of us on CS3, these errors could not be resolved, although there are workarounds.  In the classic version of this, however, your timeline should be 01:24:21 - this would be terribly short.  If there is more time, check in PR for a gap or another problem.

  There were chapters in your imported movie?

  In some cases, errors occur because of poor workflow, but short of redo your project, you can not solve most of the people.

  Things, you can try (start a new project to rework):

  Remove the spaces in the file names (only a problem if "The film" is a long name with several spaces).  Sometimes a long path can create the problem.

  Copy/move versions transcoded (m2v and ac3), 'film' without the 'other' (xmpses etc) files to a new directory and remake your project still using those.

  Re-export of PR in multiplexed avi format and try that.  (The most common problem was using an avi file, whereby the workaround option is to export you did.)

  There are different issues in this case with a slide show or a motion menu, rather than with a calendar that you have.