Error message: Windows cannot access the specified device path and the second user cannot access the internet

Similar Questions

• error message "Windows cannot access the specified device, file, or the path."

  Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.

  Hi nanditaberi,

  Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  This problem may be caused by this security software on the computer, uninstall them might solve the problem.

  Example: AVG, Zone Alarm

  Important:

  O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.

  Ø you may need to check with the manufacturer of security software for reinstallation and activation.

  O re - install the security software on the computer.

  Reference:

  Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.

  A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Error message "Windows cannot access the specific device, a file, or a path. "/ setupstb.exe".

  One offers a solution to my problem of Vista Home Premium that prevents me to access my Microsoft Web Cam (also "glik' won't let me upload files.). Thank you very much in anticipation. Tony

  Hello

  Please only post the same question once in these forums

  an answer another thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/error-message-Windows-cannot-access-the-specific/603544f6-b346-E011-86fd-d485645a8348?page=1&TM=1299283083484#footer

• When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Original title: error message

  When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Hello

  ·         What web browser do you use?

  ·         Would which site you find?

  ·         The issue is that with Yahoo search?

  ·         Exactly how you try to search? Web site or toolbar in Internet explorer?

  You try to use the Bing search engine to search for Web pages online. To access Bing search engine type www.bing.com in the address bar. Please provide us with more information about the issue to help you further.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• get the error message "windows cannot find msconfig".

  Using Vista. Dungeon can not enter start"error message" "windows cannot find msconfig".

  Hello

  I suggest you run SFC (System File Checker) on your computer.

  Scan sfc enforcement procedure:
  Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  Click on continue or provide administrator credentials if prompted.
  In the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  See this article for more information:
  http://support.Microsoft.com/kb/929833

• error message "Windows cannot remove the password. "Password policy or account require the account has a password.

  original title: remove administrator account or remove password

  I am trying to remove a user administrator account or remove the password and I get the error message below. Also, I can't delete the password as an administrator in Windows 7 32 bit or delete the account. I get this error message "Windows cannot remove the password. "Password policy or account require the account has a password. I tried to create another admin account, but it does however not take away the password or delete the account else

  Someone has put a policy on your machine to enforce some rules for passwords. Best is to ask that person to change these rules for you. Alternatively, you can run gpedit.msc, then follow this path to edit yourself: Local computer policy / Computer Configuration / Windows settings / security settings / account policy / password policy.

  Note also that:
  -You cannot delete the built-in Administrator account.
  -Administrator with a blank password accounts is a big security risk.

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• System error message -"windows cannot access the specified device path or file. You don't have permission to access it.

  Hello

  Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message

  No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery

  Thanks for your response

• When Installing Blackberry software error message Windows cannot access the specified device, path or file

  Try to install the software for my Blackberry on laptop, get the message Windows cannot access the specified device, file, or path may not be the appropriate permissions for access you element. What should I do please help...

  Re-download/save to your desktop > right click on its Setup.exeo run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• When I insert a CD of the application, I get the error message - 'windows cannot access the specified device, path or file. You may not have access to the item. I tried pretty much everything including a new CDROM and loading on safe mode.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Mefrombigd,

  1. it happens with all types of CD?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  4. you receive the error message when you insert the CD into the CD drive?

  Method 1

  Check if you can access the contents of the CD using Windows Explorer application.

  (a) click the start menu, and then double-click computer.

  (b) make a right click on the CD drive, click Open.

  (c) check if you can access it.

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.