Error message with program battery bluetooth and tecra 9100 XP SP2

When I try to start program battery bluetooth the following error message appears:
the instruction at "0x1000bf18" uses the address "0x0015d000". memory don't pet not be "read".

Is someone can tell me, what kind of question is this and how to fix it?

Thank you very much in advance


Hi Patrick,

For the benefit of other users of the forum please let me translate your error message: -.

""The Instruction at "0x1000bf18" uses the memory address"0x0015d000". Cannot read memory.

This indicates that the broadcast program has stored the second addresses two memory as a place in which it writes data and now cannot read the data at this location memory.

It may be because some other routine wrote too much memory or reported to this place as "in use".

Windows will normally prevent such a situation from occurring, but being Microsoft is not infallible and errors may occur from time to time.

If you get this message every time that you start your battery Bluetooth, it is more likely to be a problem with the Bluetooth program badly to access its memory cache, so I recommend reinstalling the Bluetooth program.

Good luck


Post edited by: NickyNoogle

Tags: Toshiba

Similar Questions

  • When itunes installation receive error message with 'install windows package' and 'procedure requires a rise. "

    Original title: Windows Installer Package

    When you try to install itunes, I get a pop up box that says: there is an error with the windows package install and it will not continue with the download.  I went online to download the package to install to my computer (Windows Vista) and when it starts to download get an error stating that "the procedure requires a rise." What it means?  I assume this has something to do with security in the administrative account that I am signed on the label on when problems occur.  Thank you!

    1 did you change on your computer before this problem?
    2 - is a problem only with itunes?
    Follow the suggestions and check if that helps.
    Method 1
    a.Right click the download file.
    b.Select run as administrator.
    Method 2
    You can follow the procedure in the article.
    Problems installing and uninstalling programs on Windows computers
    See also:
    Problem installing iTunes or QuickTime for Windows
  • I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

    original title: error with ehshell.exe

    I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

    This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

    You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

  • With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

    With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?


    Here are the steps.

    Install a cable Audio virtual on your machine:

    Under HW Audio Configuration configured Virtual audio cable as default input device

    And value clock maser virtual audio cable and try reading.

    This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.


  • How to fix the error message "unable to start Bluetooth stack service"?

    When I start my computer I get the following message: error: could not start battery Bluetooth Service.

    What is c?

    How can I get rid of him?

    How will this affect my Bluetooth?


    (1) have you made changes before the start of this issue?

    (2) windows operating system you are using?

    (3) what is the brand and model of the Bluetooth device?

    You can get this error if the drivers are not updated, or if the driver has been corrupted.

    Method 1:

    Step 1: You can check if the same problem occurs in safe mode with network.

    Please follow the link on how to start the computer in safe mode with network below.

    Step 2: Clean boot

    How to set up Windows 7 to start in a "clean boot" State

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    Manually start the Bluetooth service.

    a. Click Start, type services.msc and press to enter.

    b. in the list of components, double-click Bluetooth support Service.

    c. change the startup type to automatic and click on the Start button to start the service.

    d. click on apply and then click ok.

    e. check if the problem persists.

    Method 3: update driver of Bluetooth device. Steps to update the device driver:

    a. click on start

    b. Select Control Panel

    c. Select system and maintenance

    d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)

    e. in the Device Manager, look for the Bluetooth device

    f. click on the driver tab, click Update driver

    Link for reference: updating a hardware driver that is not working properly ' t-work correctly

    I also suggest you to download and install the latest drivers from the manufacturers Web site.

    Let us know if that helps.

  • Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

    original title: Remote Assistance does not work

    Win XP PRO SP3

    Question #1:

    When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

    This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

    The event log records all errors when this happens.

    I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

    After restarting the computer, sometimes the invitation creation works fine.

    Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

    What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

    Is it possible to debug and fix this?

    Question #2:

    When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

    I'm looking at the structure and the content of the invitation to
    In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
    RCTICKET =...; Jeff: 3389

    How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

    How can I get Remote Assistance to work on the Internet?


    The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

    Hope the helps of information.

  • I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

    I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

    Original title: Matshita DVD-R UJ 890

    Hi AJordanMiller,

    Try these methods.

    Method 1

    Run the fix - it from the link below.

    Hardware devices not detected or does not

    Method 2

    See the help article:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows 7

    It will be useful.

  • receive the error message with every new open tab

    Whenever I open a new tab, I get a popup error message. I have screen shots that can be granted.

    At first, I thought it was a mistake to Java, but I've uninstalled and reinstalled Java.

    There are two error messages which read:

    [JavaScript application]
    evalInSandbox:Error: Permission denied for <> create a wrapper for the object of class UnnamedClass.

    [JavaScript application]
    Error: Permission denied for <> create a wrapper for the object of class UnnamedClass

    So I clicked on help > troubleshooting information and choose Reset Firefox.
    Now I get a new error message with every new tab open.

    [JavaScript application]
    Error: syntax error

    Please tell us how to do this.
    Thank you

    1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
    2. Click on I'll be careful, I promise!, to continue on the subject: config page.
    3. Type browser.newtab.url
    4. Double click on the first result, a new window should now display.
    5. Type of topic: newtab in the area.
    6. Click ok and load a new tab. It now works of mireille?
  • My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

    Separated from this thread.

    My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?


    See if that helps you.

    Do a Safe Mode system restore to before the problem started.

    How to access Safe Mode


    If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:


    There are several methods to reinstall Vista.

    This can help you (download files and make your own DVDs):


    And here are instructions on how to burn ISO disk images:

    The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

    "How to download a Vista ISO and create a Setup DVD or USB"

    "How to create a USB of Vista Installation key '


    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.


    And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Them or us ask the right sequence of key.


    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    See you soon.

  • I got this error message "winrscmde has stopped working and was closed".


    I got this error message "winrscmde has stopped working and was closed".

    Program WINDOWS SECURITY ESSENTIALS download, which found the horse of TROJAN ALUERON in my system. Also, he explains that he keeps duplicating itself and the only way to get rid of it is to download WINDOWS DEFENDER on a CD/DVD or the key to a processor that has the same operating system as the infected CPU offline. I want to know if this Trojan horse attaches to the BIOS? Please tell me the other options...

    Thank you


    Hi Bruce,.
    Your computer is still infected by malicious software. Try the sequence of steps 1 and 2 in this virus/malware removal guide:
    It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  • On a 1100sa Pavilion DM4 how prevents one error message: unable to start Bluetooth stack service?

    I have a HP Pavilion DM4 1100sa, p/n: XE139EAR #ABU, a serial no: CNU1220Z75. I bought it about 2 weeks ago. Shortly after he stopped hibernating when I closed the lid and the fingerprint reader was also very intermittent, also error message unable to start Bluetooth stack service popped up after the computer has been rebooted and after startup of Internet Explorer... My own attempts to remedy that does not so I called your 0844 3690369 number and possibly your man said that the only option was to do a complete restore of the system. For this I made and then reinstalled my commercial software such as M/S Office 2010, Adobe Photoshop elements 9 etc.

    The error (see above) again reappeared and the fingerprint reader was still intermittent, also my Bluetooth mouse is not connected. Yet once, my own attempts to cure these problems have failed, including playback of your pages in the forum, so I phoned again, everything seems to be resolved but the initial problems and the subsequent, reappears.

    So I made an another System Recovery on Thursday, July 26, 2012. I did a full defragmentation and wiped the free space on the hard drive. This time, the only problem that occurs is the error message failed to start Bluetooth stack service. Yet once it appears only after a computer reboot and start Internet Explorer.

    I am very reluctant to spend another hour, or so, on the phone so I want your best and hopefully correct advice on how to avoid this very annoying message from popping up.


    We will uninstall the system Broadcom bluetooth driver and that's it.

    We will not install another driver for this device instead.

  • After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

    After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

    Pls I need help to resolve this error message.


    Unfortunately, this model laptop has a Broadcom bluetooth device or a device of Atheros.

    Try to install the Atheros driver first because it is more common.  If it isn't an Atheros card, Setup HP rejects the update indicating no match of material.

    If this isn't Atheros, install the Broadcom bluetooth driver.

    Here is the page of the driver for your laptop and Windows 7 64-bit.

    Bluetooth drivers are in the category network drivers.

    Let me know what happens.

  • Displaying an error message with a link to the error field

    By default, validation of the ADF has usually shows an alert with an error message and a link to the field of the error.

    I have some custom validations where I finally to display the error message with this:

    public static void MessageError (String messageText) {}

    String messageText = "" No. is han sown estos datos '; "

    FacesMessage fm = new FacesMessage (messageText);


    * set the type of the message.

    * Valid types: error, fatal, information, warning


    fm.setSeverity (FacesMessage.SEVERITY_ERROR);

    FacesContext context = FacesContext.getCurrentInstance ();

    context.addMessage (null, fm);


    My client application displaying a link to the field in error in this kind of error alerts as do the standard deviations.

    Is it possible to achieve this?

    Try setting the first parameter to the addMessage (which has the value null in your case) on the id of the component whose validation failed. That's what part.


  • Subject: healthreport, about: preferences, about: newtab all give the same error message: the URL is invalid and cannot be loaded. All this since the last update

    Whenever I select all: preferences? entrypoint = menubar #sync, about: healthreport, about: preferences, about: newtab, I get the same error message: "the URL is invalid and impossible to load. All this since the last update tot 50.0 FF. I have tried refreshing Firefox, but to no avail. Help, please. Best regards, mauver

    Hi FredMcD,

    You are the hero of the day. Well, everything seems to work again with the exception of my best websites (which should open when I click on new-tab). But it's only a minor problem and I can easily restore that manually.

    Thanks for your help,


  • CC of Dreamweaver generates one of the 3 error messages when you use find and replace on 8.1 Win 64 bit.

    CC of Dreamweaver generates one of the 3 error messages when you use find and replace is used more than twice in a row. "While executing onLoad in bc_afterSave.htm, the following JavaScript error occurred: at line 188 of file C:\Program Files (x 86) \Adobe|. Adobe DreamweaverCC | Configuration | Shared | ' BC\JS\bc_sites.js': out of memory.


    When executing RunCommand in File_Save.htm, a JavaScript erroroccurred.


    While exciting getDynamicContent inAdressURL.htm, an erroroccirred of Javascript.

    Any thought - I find myself CBWMS of closing and reopening. Will work for the other two find and replace once again before the popup of messaged\s error.

    Cough, cough, cough - 38 500 pages? !  Really?  It's a big site!

    I'm not surprised, that you are short of memory.  Try to limit your F & R records or select files rather than the entire Site.

    Nancy O.

Maybe you are looking for

  • 9.3.1 iOS cannot add pictures to iCloud shared album

    Since the upgrade to iOS 9.3.1 I can't add pictures to iCloud shared albums. Tried cela two ways. By selecting the option of sharing photos of iCloud film images. If a new album name is defined, the album is created, but it remains empty. The second

  • W7 en Ultiboard

    In 1998, I bought the Ultiboard 5.62.0 studentversion.I'm an amateur and I use the program only 2 times per year.In Windows XP, I could use the compatibilitymodus "Windows 98/Windows ME" to use the program.I now use Windows 7 and I get the message to

  • failure to download the update of security KB2446704

    I get a notice to update to update ' a security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2446704).» But, when I click on update this security update, it seems to download, but then immediately turns

  • In Windows Movie Maker - titles and quotes move after placing the transitions

    I use WMM and Vista.  On the Board of directors or the history time line, I placed my photos, adding titles and credits and then transitions.  All the titles and credits moved after placing the transitions.  I made the corrections and then saw the fi

  • errorcode32

    error code 32 prevents a program from installation nero download, the solution please, alan.