Similar Questions

• Your backup configuration is not valid consider your 0 x 8100029 backup settings

  Original title: backup on external hard drive problems?
   
  I'm trying to backup to an external hard drive, but get the following error:

  Your backup configuration is not valid consider your 0 x 8100029 backup settings

  My external hard drive is recognized under my computer.

  Hello

  Welcome to the Microsoft community.

  It would be great if you can answer the following question:

  Were there any changes made on the computer before the show?

  To resolve this problem, I suggest you to refer to the article and see if it helps:

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer

  http://support.Microsoft.com/kb/950167

  Let us know if you need more assistance.

• Backup and restore problems: your backup configuration is not valid. Please review your backup settings (0 x 81000029) Please try again.

  Original title: back up and restore the problem

  I'll give you a full explanation on what is my problem, so that it will make it easier to answer if all goes well. I use Windows Vista and decided it was time that I backed up my files. After clicking on the tab "back up files", I then got a dialog box asking "how many times you want to create a back up" so I chose "per week" on "Sunday" at 19:00. "There is a message that goes down"because it's your first backup, windowws will create a new, full backup now. However when I click on the 'Save settings and start backup' tab I get the message "file back up could not save your automatic backup settings for the following reason.

  Your backup configuration is not valid. Please review your backup settings (0 x 81000029) Please try again.

  Someone has an idea what is the problem?

  Hi frankspencer,.

  Step 1: You can follow the steps mentioned in the article below

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer

  http://support.Microsoft.com/kb/950167

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Your backup configuration is not valid. Review your backup settings. 0 x 81000029

  Original title: Window Vista backup 0x81000029___File backup code might not save your automatic setting for the backup configuration following reason: ___Your is not valid. Review your backup settings.  0x81000029__

  I created a new backup set and got this response:

  File backup could not save your automatic setting for the following reason:

  Your backup configuration is not valid. Review your backup settings. 0 x 81000029

  Hello

  This problem occurs when you click on save files in the backup Center dialog box and restore, then you select the hard drive as the location to save the backup.

  This problem can also occur if you have an EISA partition that is marked as active on the hard drive.

  To resolve this problem, try the steps in the "RÉSOLUTION" section and check the result:http://support.microsoft.com/kb/950167

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Since the last update installed, I can not open my older files.  I get the error message that the file is not found.  Installation remove my old files?

  Since the last update of Adobe Reader XI installed I can shoot to the top of the list of all my files on the SHOW ALL option, but when I try to open my old files, I get the error message that the file is not found.  The update to remove all my old files?  Is there anyway I can locate, then open them?

  You can use Windows or Macintosh to search all PDF files and start to bring together them.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• Cannot delete the file and the error is "the specified file is not valid or too long." Specify a different file name.

  Hello

  I have filenames with weird values inside (created by Application software).
  Here is an example:
  GIBtmpphoto0_11:27:16.145.png

  When I try to delete it, I have the following error:
  The specified file is not valid or too long. Specify a different file name.

  And it takes a lot of space in my hard drive.

  How is it possible to remove it?

  Thank you.
  Best regards
  Marc

  Original title: delete files with weird names

  Hello

  My corrupt files are found on a disk of material on my computer.
  I have re-formatted the full disk to remove these files.

  Best regards
  Marc

• Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

  Original title: how to fix browseui.dll without original windows disc?

  Hello

  Well, kids, here's the deal.

  I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

  There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

  NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

  Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

  I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

  We are this:

  1. is there a way to correct this file without the disc?

  2. can I get another copy of the disk without having to buy it?

  3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

  If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

  If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

  Explorer.exe - bad Image
  The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

  From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

  Explorer.exe

  Click OK to launch the Explorer and your office must return.

  Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

  If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

  Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

  If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

  You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

  Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

• Receive the error message "your current configuration does not allow this file to download.

  Original title: Windows Defender security problems?

  Anyone know how to bypass Windows Defender to allow viewing of websites or certain parts of a website? I don't want to turn off Windows Defender, but working around him. Whenever I go into a subcategory of my University web site, I get a message that reads as follows: 'your current configuration does not download this file'

  I don't want to download the file, just to see the link that are associated with.

  Thanks to all those who know well that to answer.

  Hi Eric,.

  Thanks for posting your question on the Forum of the Microsoft community.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Could you please provide the names of a few websites that is blocked?
  2. Have you tried to open these websites of all other browsers? If yes was the result even?
  3. How are you sure that these sites are getting blocked by Defender?

  According to the description of your problem, it seems that you are unable to open some websites, then, there may be a chance that the site is not compatible with Internet Explorer. So I suggest to open these websites in compatibility view and see if it helps.

  • Open Internet Explorer..

  • Open Web site which is getting blocked.

  • To open the toolbar, press the alt key pressed .

  • Now, click on Tools.

  • Then click on compatibility view settings.

  • You will see the name of the Web site under Add this Web site, to do this, click Add to add this Web site.

  • Close the window and restart your computer.

  If the problem persists, try to trust these websites by following the steps mentioned below.

  Step 1: Open the trusted sites

  1. Open Internet Explorer.
  2. Press the Alt key to display the Tools menu.
  3. In the menu, click Tools.
  4. Now, click on Internet Options.
  5. Click on Security tab.
  6. Select Trusted sites.
  7. Click the Sites.

  

  Step 2:

  Add the trust Web site

  1. Enter the address of the site you want to add.
  2. Click on Add.
  3. Close the open windows of Trusted Sites and Internet Options .

  

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• All icons changed to and will Outlook open, error message "command line argument is not valid."

  I have been using Windows 7 and Office 2010 since the beginning of this year. Suddenly, I have a problem.

  All my software program icons (shortcuts and start menu) moved somehow to be the Outlook icon. When you try to open Outlook and any other program, I get the message "cannot start Microsoft Outlook. The command line argument is not valid. Check the switch you are using. »

  None of the software opens. This is true for Microsoft products and software from other companies.  The only way I can open/use some of my software is to go to the file and open it from there. How can I solve this problem?

  I tried to use my Office CD to repair the software, but nothing has changed.  I tried to go into the properties of the icon to see if the problem can be corrected for other software but the links are to the correct files and the icon will not change.   Nothing I've tried works.  Even in Control Panel administrative tools are not open (they have also been changed to have the Outlook icon).

  . I need help as soon as POSSIBLE. THX

  Only, I've solved my problems with this re - create my profile.

  To re - create your user profile name just as a different user and ensure that the user have a good administrator.

  Go to my computer > users (Windows 7) or Document and settings (Win XP) > find the profile that have a questions and rename (* do not delete because we need a return to the top if there is all data must be transferred to a new profile)

  Another thing need to do is to change the registry by go to start and type regedit (make sure administrator too)

  Go down this path HKEY_LOCAL_MACHINE NT\CurrentVersion\ProfileLIST\ * only Applicable for Windows 7

  Oncve you see all the list such as S-1-5-18... something like this a check which is the profile who have questions and delete.

  The profile with a questions can be seen on you under ProfileImagePath: C:\Users\

  In fact, you can try to reconnect and it will be relaxing a new profile just transfer back up the old data of the profile that was rename in the new profile that has been re - create.

  Hope this helps, if so please mark this answer.

  Thank you

• After the installation of Windows Vista, I get the error message "" windows/System / * ' file was not found "

  Original title: after the new installation of windows Vista it does not work.

  After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If you continue to have problems with it contact lenovo

  http://www.Lenovo.com/us/en/index.html

• June 24, Yahoogroups started to give an error message when you try to access the groups, I have been on for years. Same thing on three computers.

  The error message was: -.

  ====================

  The page is not redirecting properly

  Firefox has detected that the server redirects the request for this address in a way that will never end.

     This problem can sometimes be caused by disabling or refusing to accept cookies.
  

  ====================

  I've been on these groups for years without any problems and all of a sudden happens.

  ... Graham Newton gn@audio-restoration.com

  Graham,

  I also had the issue. It seems that it is a problem with cookies. So what I did to solve the problem was to do the following (I use Firefox 30.0 with the add-on to make it look like the old Firefox):

  1. Go to Options (either with the key or tools-> options)
  2. Click the Privacy tab
  3. Click The remove individual Cookies
  4. I deleted all cookies, but maybe it's not necessary to do what you could just delete cookies from Yahoo to return to Yahoo groups.
  5. I went back to Yahoo groups and was able to go to my groups.

  I hope this helps.

  George Worley

• When you try to check my e-mail acct sync, I get an error message that the URL is not valid. When I check the link, everything that comes is http / / and nothing el

  When I check the link all that shows is http / / and nothing else. She does several times. I use Outlook for Windows 8.1. I have not tried the links embedded to see if this is a universal or just isolated problem to this email in particular.

  You can follow the discussion in the bug.

  • bug 1003082 - check/verification link broken in emails for confirming registration accountant Firefox sync if reading mail in Outlook

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Have a great 2009 backup file is not deleted.

  I tried to remove through the usual channels, and I have run suggestions as administrator, but everything just cannot remove this old and quite useless backup file to there are 2 computers.  There is nothing that I need because individual segment within the backup files will not open and I have not been able to find a program to open.

  I need help to remove this big enough file.
  Thank you
  jyeary3

  Start in safe mode, see if it can then be deleted.

  In the case against where the file is located and what exactly is the err msg?