Error messages: specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL

Similar Questions

• Error "the specified module could not be found" when the USB drive is connected.

  Original title: execution of disk error hard usb

  I use windows 7. whenever I have plugin a usb drive and open it it gives a shortcut of the same drive without showing all data and when I opened the short cut, the following error is displayed.

  There was a problem starting 4 # .ini
  The specified module could not be found.
  I also try to activate windows bit defender it gives error

  Internal error of shell. Please contact the software developers

  Code = 0xC000005, address = 0x10059E8D

  Hi Prashant,

  Try to uninstall the security essentials and install avast.  I have installed trial version, he found an additional virus and after that my system works fine.  Try it and check if it works.

  Concerning

  Patricia

• RunDLL error, the specified module could not be found

  Good evening

  I have a RunDLL error message which keeps popping up

  "There was a problem starting.

  C;\Users\***\AppData\Roaming\pdvcec.dll

  The specific module could not be found.

  Please can you tell me why im getting this error.

  Thanks in advance for any help,

  Emma

  Original title: RunDLL Error Message

  FOR WINDOWS IT WORKS GUYS 8.x

  For users of Windows 8 on this number RunDLL error (HPStatusBL.dll)

  * IMPORTANT  (Activate prior the hidden files and folders)

  Windows Explorer - view - check the box next to "Hidden Items"

  Now, go to this site:

  C:\Users\(your user name) \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

  (Maybe depending on who has installed the software, see other users if you do not do so in your profile)

  Remove the shortcut that HP does not decently cleanup during uninstall:

  Monitor alerts ink - HP xxxxxxxxxx

  It has nothing to do with a service, just a shortcut link that always tries to start which has been uninstalled or deleted.

• RunDll error loading the specified Module could not be found (C:\Dan\AppData\Local\ngrfry.dll)

  Every time I restart my PC, I was above error... Then when I try and download the toolbar from Road runner, I get this (windows cannot access the specified device, path or file. You don't have permission from the appropriate permissions to access the item)

  C;\users\Dan\AppData\local\Temp\GLF391~1.exe

  Please, can someone help me with this... Thank you...

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• DeskJet 2542 all-in-one: 2542 Deskjet all in one error: "the specified module could not be found" when installing on USB

  Installation runs OK until the USB cable is connected, when the error message appears and the installation fails.

  I have correctly installed and work the printer on another XP PC of a similar age - that is to say old.

  I've updated the XP operating system to SP3 with many updates.

  Check that ports USB read only data fits OK;

  run a / v programs and malware, including Microsoft Safety Scanner;

  check that the USB drivers are up to date;

  software driver uninstalled and reinstalled with the software downloaded from HP;

  performed the procedures detailed in HP Support Forum 4022116

  The same error message.

  It's for my elderly neighbour - help please!

  The somewhat simpler answer to this problem was to do a clean install of XP SP2, accepting the necessary updates, and then install the printer software, downloaded from HP.  A lot of time but it worked, and the old PC runs a little faster!

• Using Windows Media Player, I get the error: "the specified module could not be found" when I try to play a wave (.wav) file.

  I have re-installed sound edge card, updated the driver, checked that it is enabled in the bios. Play other types of sounds.

  Wave Systems sounds do not play either and everything by checking the sound scheme system sounds, (Panel > properties of sounds and audio devices > sounds tab) they don't play and the 'play' button is not enabled.

  Hi sureshotsd,

  · What version of Windows media player you have installed?

  · What is the service pack installed?

  · You receive an error with the error code?

  · Do you remember all the recent changes on the computer before the show?

  Follow the method below:

  Method 1:

  Create the new user on the computer account and check if you are able to play the file. You can check the link for the procedure to create the new user below account: how to create and configure user accounts in Windows XP:http://support.microsoft.com/kb/279783

  Go back with the results.

  Method 2:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message @ boot Win 7 Pro "it was Aproblematique from C:\programdata\ofpviaowu.dat - the specified module could not be found."

  Error message @ boot Win 7 Pro "there was a problem starting C:\programdata\ofpviaowu.dat - the specified module could not be found."

  This error message appears whenever I have start my computer and windows starts (Firefox doesn't start up). 15.01 Firefox work properly otherwise.

  This started after I installed the 15.0.1 patch.

  I uninstalled and reinstalled Firefox but the problem remains. Search Google for "ofpviaowu.dat" came with "2012-08-29 Firefox version 15 startup Crash Report" as the only listing.

  Is this a Firefox problem?

  My system has this file: C:\ProgramData\Mozilla\logs\. I don't think that Firefox or update service should write directly to the root of C:\ProgramData\. It could be a configuration error, or it could be completely different.

  You may be able to remove your boot sequence problem .dat file using Microsoft Autoruns utility: Autoruns for Windows. If you find an entry, can describe you it?

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Cannot install Intellimouse on XP, I got an error message: error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  Original title: cannot install Intellimouse on XP

  Hello

  I have mouse Intellimouse optical 1.1, I want to customize sound buttons.

  Recently, I tried to install its driver on laptop T410, installed with XP 32 bit operating system. Unfortunately, I got an error message:

  Error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  What is the problem?

  Thank you

  Uriel

  Hello

  Please try this and report results:

  1. Click Start, point to settingsand then click Control Panel.
  2. Double-click System, click the hardware tab and then click Device Manager.
  3. Double-click mice and other pointing devices branch to expand it.
  4. Right-click the IntelliMouse pointing device, and then click Properties.

     The IntelliMouse pointing device should be listed as follows:

     Microsoft USB IntelliMouse explore (IntelliPoint)
  5. Click to update the driver.
  6. Click Next in the Wizard update device driver dialog box.
  7. Click display a list of drivers that are known... , and then click Next.
  8. Select the Microsoft mouse driver that ends with (IntelliPoint), and then click Next.
  9. Click Next to confirm that you have selected the right driver.
  10. Click Finish to complete the installation of the new driver

• I get the message error loading 3da1a2 ~ \dojrjrj2h.cpp the specified module could not be found

  Whenever I start my computer, I get the message error loading 3da1a2 ~ \dojrjrj2h.cpp the specified module could not be found. Anyone know what this means? Help.

  Moved from Vista devices and drivers Forum.

  Hello

  Google has no information on this file, so it's probably a Malware startup more entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  This could be caused by malicious software. Your antivirus may have removed part of it or prevent it install completely.

  Run a full scan with your antivirus, download and run Malwarebytes Anti-Malware freehttp://malwarebytes.org/

  To prevent the display of a message run Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx . You can look up the references to the file and disable the entries.

• Start error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found."

  Original title: run DLL error message

  When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found.  I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found.  I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking.  Thanks for your help.

  Hello MaureenCYB,

  Thank you for the question!

  I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  Hello

  Here is some information on this problem.

  The information contained in the link suggest you delete a scheduled entry, if it exists:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

  You can also use this program (FREE Autoruns) to find:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• "iphbrbtf.dll the specified module could not be found" error starting

  When you open my computer laptop OS xp, got this message at the opening of service pack 3, I got this error RUNDLL XP loading C:\WINDOWS\system32\iphbrbtf.dll the specified module could not be found.  How can I remove this annoying message?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.