Error messages when I connect to a controller

Hello. I hope this isn't the wrong section.

I just installed a controller Xbox on my PC, using x 64 drivers here

Unfortunately, I still have error messages when I connected controller. If the controller is disconnected when I turn on the PC, then I got the error when I connect it.
A mistake is on C++ and the other on "XboxStat.exe has stopped working". Seems is not entirely compatible with the 360 controller drivers.

The error messages photos here:

http://I57.Tinypic.com/2i6mlgy.jpg
http://I57.Tinypic.com/332uo7p.jpg

I have Win7 x 64 with all updates.

Hi Marco,.

 
As you have tried the steps that are proposed before and still the problem persists, I suggested you to indicate the query in the Xbox forum, as the question is specific with the Xbox controller. So, please post your query it using the link below, so that the Xbox support team can help you solve the problem.
 
Hope this information is viable to fix the problem.

Tags: Windows

Similar Questions

  • "load error" message when you connect to windows vista account___

    When you connect on windows (vista) to my sons account, a window appears with the Dll Run in the upper left corner and a message that says: error loading C:\Users\... it indicates the name of my son, then - Home\AppData\Local\l41DMut.dll.  It does not appear on the admin or any account of my other children. (parent) account.

    I have tried to download a Web filter, but could not.  I wonder if this error message is the problem.  Even if this is not the problem with the download works do not, should not be there.  You can click on the x to close the box (it always appears twice) and then open Mazilla Firefox, etc.

    What is going on?? Can you help me?  Thank you!!

    Google has nothing for it; normally, who points to him being Malware...

    ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

    Malware scan:

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight...

     

    How to use Malwarebytes once it is installed and updated:

    1. open Malwarebytes > click the update tab at the top > get the latest updates.

    2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

    3 MBAM will now start to scan your computer for malware. This process can take some time.

    4. when the scan is complete, a message box will appear

    5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

    6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

    7. a screen showing all of the malware displayed the program that is

    8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

    9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

    10. you can now exit the MBAM program.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the error persists after scanning, use the program to out startup:

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

    See you soon.

    Mick Murphy - Microsoft partner

  • Receive error message when you connect to a Hyperion Essbase Studio 11.1.2

    Hi all
    I searched the forum trying to find an answer to my problem without success. Thanks in advance for any help you can provide.

    When you try to connect to Essbase Studio Client, you receive an error "connection with Essbase Studio Server error: network error ', in the details of the tab of this popup is"network communication with the server failed. Check your network connection and try again.
    "Connection refused: connect". I found that this usually means that the Essbase Studio Service is not running. 11.1.2 Hyperion Essbase Studio is installed as a service. I don't know if this is the case in previous environments.

    The windows service is running and running and I also try to start from the start menu and it doesn't seem to be errors. But when I look at the logs of start-up, that's what I find.


    [2010-08-17 T 15: 29:15.457 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: sap] could not load the driver for sap.
    [2010-08-17 T 15: 29:15.457 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: teradata] could not load the driver for teradata.
    [2010-08-17 T 15: 29:15.473 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: netezza] could not load the driver for netezza.
    [2010-08-17 T 15: 29:15.707 - 07:00] [hyperion] * _ [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Cannot initialize catalog storage. Make sure that the server.properties file contains the correct information. [[_*
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog. CatalogInitializationException.StorageInitializationFailure
    at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:221)
    at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:100)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:166)
    to com.hyperion.cp.catalog.Catalog. < init > (Catalog.java:87)
    to com.hyperion.cp.catalog.Catalog. < clinit > (Catalog.java:75)
    at java.lang.Class.forName0 (Native Method)
    at java.lang.Class.forName(Class.java:169)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:63)
    to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1303)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:168)
    to com.hyperion.cp.server.RequestListener. < init > (RequestListener.java:130)
    at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:192)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:260)
    Caused by: java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:215)
    ... 13 more
    Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: the 'hstudio_dev.hypsql' database does not contain the tables in the catalogue of Studio. Please check the value of the "catalog.db" parameter in the server.properties file. _
    at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:136)
    to com.hyperion.cp.catalog.storage.StorageEngine. < init > (StorageEngine.java:86)
    to com.hyperion.cp.catalog.storage.SQLStorageEngine. < init > (SQLStorageEngine.java:20)
    ... 18 more

    ]]

    I opened the server.properties file located under the E:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bpms1\bin directory, and everything seems to be OK here. Here below.

    #
    #Tue August 17-14:45:43 PDT 2010
    Catalog.autoinit = true
    Catalog.UserName = hypsql
    transport.Port = 5300
    Catalog.URL=sqlserver\://ethype-SQL.Sierra.local\:1433
    Catalog.Password=69tVGsObffmeWaFX0LB2tA\=\=
    Catalog.DB = hstudio_dev.hypsql
    server.hss.bpmApplication=BPM\:77538

    I tried out the "-" in the server names and the name of DB without help, I tried to put quotes around the "hstudio_dev.hypsql" with no luck, and I tried to connect to a database that had no '-' inside. I also followed the steps described by the support for the same question in 11.1.1.x which you enter in the DB > Security > schema > add a new schema/user, create the user and the owner of the schema, etc. It also did not help.

    This is a new installation and everything else is fine to connect to DB, default user hypsql DB is the DB hstudio_dev. I installed in different environments, and this same problem happening in both environments. Please let me know if you have any questions, thank you for your time and your help.

    Also, I realize in the DB and I see that a lot of tables in fact were created then it will connect at least during Setup. I've also reconfigured several times without success on different from the DB and always new/clean the DB. and the hypsql of the user is a DBO for this DB. It's DB SQL 2005, Windows 2003 servers.

    Published by: 789316 on August 18, 2010 11:07

    Published by: 789316 on August 18, 2010 11:10

    Published by: 789316 on August 18, 2010 11:13

    Published by: 789316 on August 18, 2010 11:21

    You seem to be two people now, but you

    Catalog.DB = hstudio_dev.hypsql

    If the implementation is the same wouldn't

    Catalog.DB = hstudio_dev.dbo

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

    I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

    It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

    Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

    If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

    As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

    But it's your call.

  • Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

    Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

             Firefox is configured to use a proxy server that is refusing connections.
    
     Check the proxy settings to make sure that they are correct.
     Contact your network administrator to make sure the proxy server is
       working.
    

    Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • Get 810 error message when you try to connect to the VPN using L2TP protocol

    Original title: L2TP will not let me connect.

    I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

    I think this should be a simple and easy solution, but where can I find the answer?
    Please help me.
    Thank you for your time.
    Allan.

    Hi Allan,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

    http://social.technet.Microsoft.com/forums/en/category/w7itpro

    If you need any other assistance, let know us and we would be happy to help you.

  • I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

    I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

    If you are running Windows XP... There is a slight chance
    that by running the following command would be the fix:

    Reach... Start / run... and type or copy / paste the following text:

    regsvr32 %windir%\system32\qdv.dll

    Then... Press on... Come in...

    You should see a dialog box stating:

    DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

    Good luck...

    There is debate on this subject in the following forum:

    Windows Movie Makers Forums
    An unknown error has occurred

  • Receive dns error message when you try to connect to the internet.

    I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this

    I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.

    Hi sandyrb,

    1. What is the error message when you try to access the internet?
    2. You use Internet explorer to access the internet?
    3. Did you the latest changes on the computer?
    4. What is the type of internet connection you use?
    5. You have security software installed on the computer?
    6. How do you know that the computer is connected to the internet?

    Method 1

    Check if the problem persists in mode safe mode with network mode and post back with the result.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Method 2

    If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    Method 3

    If the previous step fails, then reset TCP/IP on the computer and check if that helps.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    How to troubleshoot connectivity TCP/IP with Windows XP

    http://support.Microsoft.com/kb/314067

  • I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

    original title: devmgmt msc

    I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

    Hello

    I suggest you to see link below and check if it helps.

    http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

    I suggest also you see the steps from the article below and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  • When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

    When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

    Hi rhondas44981464,

    Try to use the export to PDF online service https://cloud.acrobat.com/exportpdf (Sign In using your adobe ID, in which you have the subscription).

    Kind regards
    Nicos

  • Downloaded the trial version of Acrobat DC. Now cannot open any program acrobat. I get the error message when needed to connect: connect to the internet and try again. Computer is out of connection or your computer's clock is out of adjustment

    Downloaded the trial version of Acrobat DC. Now cannot open any program acrobat. I get the error message when needed to connect: connect to the internet and try again. Computer is out of connection or your computer's clock is out of adjustment

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

    Mylenium

  • I get an error message when I try to log into ExportPDF with my Adobe Reader software. "Network error has occurred trying to connect. Can someone help, please?

    I get an error message when I try to log into ExportPDF with my Adobe Reader software. "Network error has occurred trying to connect. Can someone help, please?

    Hi Simon,.

    I'm sorry to hear that you are having problems connecting to ExportPDF by the reader. I checked your account and everything is fine there.

    To start, please make sure that you have the latest version of the reader on your computer by choosing Help > check for updates.

    If you still have problems to connect by the player, please try to connect to the web interface at https://cloud.acrobat.com.

    Please let us know how it goes.

    Best,

    Sara

  • I get error messages when I try to visit some Web sites you use Mozilla Firefox, but not when I use other browsers

    About two days ago, I noticed that when I tried to access some websites using Firefox, I always got this error message. "The connection was reset". Initially, I thought it was a problem with my ISP before noticing that the network was fine on my phone and the iPad. I tried and then open the same links which brought up the error message on the TorBrowser and it worked perfectly.

    Basically, the only site that works right now on my Firefox browser is Google but if I do a Google search and then click on any link that appears so I get the same error message, "the connection was reset". I can also connect to my gmail account, but I can't access any other Web site including Feedly, Tumblr, Twitter, Yahoo, Wordpress, Blogspot, even though they work fine on my other browser.

    I have cleared my cache and cookies, wiped out all browsing history, but the problem persists then I uninstalled Mozilla Firefox and reinstalled. The problem is still there. I checked the proxy settings, I went through all the solutions on this page https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a & as = aaq and still nothing. I'm not sure what the problem is here, but any solution will be appreciated. I have used Firefox for years and I'm really not comfortable using a different browser.

    I use a Macbook OS X Version 10.9.4 and the last Firefox 32.0.1

    Create a new profile as a test to see if your profile is the source of the problems.

    See creating a profile:

    If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem

    Profile backup and restore

  • I get 2 back to back error messages when I turn on my computer?

    I get 2 back to back error messages when I turn on my computer, they are:

    (1) "Windows cannot find ' * 2 boxes * [I don't see what it is and only 2 boxes are visible]. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click on search"; Clicking OK comes the following error message
    (2) could load not run ' * 2 boxes * [I don't see what it is and only 2 boxes are visible] ' specified in the registry. Make sure that the file exists on your computer, or remove the reference to the file in the registry. "

    Browse for it on the internet I came across a software called HAKO Removal Tool. This website says that my computer has been infected by a Trojan of HAKO and that would fix it. I downloaded, scanned the computer with her and she found a problem with the 2 files.
    "Process.exe" and "HotKeysCmds".  BUT this is a paid software and I have to pay 50USD to use. Is there anything else possible?
    Although Kaspersky' 10 and Super AntiSpywayre don't seem to find anything wrong.

    Symptoms:
    Computer is very slow. especially the navigation on the internet. Whereas it is fine if I use a laptop with Wifi..?

    What is the problem?

    I get 2 back to back error messages when I turn on my computer, they are:

    (1) "Windows cannot find ' * 2 boxes * [I don't see what it is and only 2 boxes are visible]. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click on search"; Clicking OK comes the following error message
    (2) could load not run ' * 2 boxes * [I don't see what it is and only 2 boxes are visible] ' specified in the registry. Make sure that the file exists on your computer, or remove the reference to the file in the registry. "

    Browse for it on the internet I came across a software called HAKO Removal Tool. This website says that my computer has been infected by a Trojan of HAKO and that would fix it. I downloaded, scanned the computer with her and she found a problem with the 2 files.
    "Process.exe" and "HotKeysCmds".  BUT this is a paid software and I have to pay 50USD to use. Is there anything else possible?
    Although Kaspersky' 10 and Super AntiSpywayre don't seem to find anything wrong.

    Symptoms:
    Computer is very slow. especially the navigation on the internet. Whereas it is fine if I use a laptop with Wifi..?

    What is the problem?

    If your computer has not already been infected by virus or malware, it is probably now after you have downloaded and installed something of a site that wants to pay you $50 to remove something you didn't know you had until told this same site.

    Do you mean that you have installed Kaspersky Anti-Virus 2010?  Your subscription is up to date?

    Similarly, you would update SUPERAntiSpyware before running a scan of your computer?

    I'm not sure what you mean by '2 boxes.'  Do you mean that instead of characters for a file name, you see two empty squares?  In any case, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx install it and let it scan.

    When Autoruns analysis is complete, click the 'connection '.  Review them entered what whether that looks like "bad."  I can't be more specific, because you could not see that the name of which has been commissioning.  By looking at the name of the entry, its description and its publisher, you should be able to easily identify most of the entries in the logon section.  If you can't, either post the details of back here or do a Google search.

    For any entry that does not appear to be legitimate, uncheck the box to the left of the entrance.  Close the Autoruns and restart the computer.  Messages should no longer appear.  Once you are convinced that you have disabled the correct entries, you can go back and use Autoruns to delete (instead of just deactivating).

    I also suggest you analyzing your system with other tools.
    Download, install, update and run MalwareBytes Anti-Malware.
    Go to http://www.eset.com/us/online-scanner and let it scan your computer.

  • eror message when I connect a profile of the user of Windows Vista Business Service has no logon.

    eror message when I connect a profile of the user of Windows Vista Business Service has no logon. Failed to load the user profile after wimdows update I have this problem I try safe mode but the gel keyboard, I try F12 boot does not work please, someone came to help me I need my computer for work

    Hello

    as you can not get into safe mode and work within the keyboard freezes in safe mode to do a startup repair disk

    then do a restore of the system of breast

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    and to read this information to try to fix the user profile cannot be loaded problem

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

Maybe you are looking for

  • Why file &gt; Send link not working? Even do a right click on my mouse does not work. Is there any solution for this?

    Why can I no longer send links to Web sites? By clicking on file > Send link does not work or right clicking on the mouse. Both worked before Firefox 6. I can also send emails to sites that don't specify their address, but to say "send an e-mail, cli

  • Excite Pure AT10-A-104 - cannot write to SD card

    Hello I have Toshiba excited Pure AT10-A-104 and I can't write on the micro SD card or the USB connected via an adapter otg (drive to creat file, the tablets say error...). It's embarrassing. Could you help me please 4.2.1.00 Android...

  • Satellite Pro L300D-11O - freezes in second life

    Second life, I play on my lappie. http://SecondLife.com/support/system-requirements/He is lagging, I crash, a general cannot go to all occupied the SIM or it freezes. One got suggestions on I can change the settings to improve this? Thank you to adv

  • PXI chassis with remote hot-plug

    Hello I use the SMU-PCIe8371 with SMU-8370 remote control instruments in the SMU-1075 chassis in Vista. In order to see my instruments in MAX the chassis must be turned on when I reboot Windows. If I disable the chassis while Windows is running, I ha

  • How long does take to install Windows 7?

    I heard of this measure about 20 hours to install Windows 7. This seems unusual to me.Then, other people say it's fast. Ed Bott: "Windows 7 installs is unquestionably faster that installs Vista.» Microsoft data shows that the upgrade are at least 6%