Error messages when you move files PSE13 and PSE14

I am reorganizing my records of PSE 14.1 (and a few hours before using the PES 13) on Windows 10. This means that I'm moving them from one disk to another using the view of folders on the left panel of the PES.

Everything goes very well with the first shift after the launch of PSE. No error message and the files in the folder find you in the right place with the folder.

But for much of the subsequent move there is several error message boxes that must be pressed one by one to move forward. Much more than the number of files involved. However, ultimately files and folders get into their expected places. But with dozens and dozens of needless (?) Click on the OK button.

Error messages that I see are

  • "A folder with the same name already exist in the requested location" - which is patently false, as I'm only moving called records and verifying that I won't have existing folders with the same name instead of the target. The record was 16 photos inside and the message popped up 55 times.
  • "The operation could not be performed. "The error occurred because of invalid characters, read only location or existing folder with the same name"-this comes very often after the message stated above, but not always. And in multiples as well.

And every now and then the move operation is going well through.

I tried to understand if there is a model - but nothing so far... I use no "special characters" in the filenames etc...

Is there another way to move the folders? Is there a solution to this behavior?

juhar76990688 wrote:

Looks like I have at least found a way easier and more predictable and easier to reorganize my files: travel using Windows file / folder management tools-, then to reconnect files from PSE. In this way, I know how many dialog boxes, I need to treat every step - and it is much less than the way PES...

Yes, it was what I was going to suggest it.

I did not PSE14 because I'm away from home now. I've already met these messages before, and I think you are right that the first time you move a folder to a new empty destination tree, you do not have problems. I would not be surprised if there was a real bug in the display of folders when you move files repeatedly, but I was not able to reproduce the problem. A possible source of problems would be the way the folder hierarchy is updated in elements; I guess that to keep this folder updated tree, there is a procedure of "cache" to speed up the process (folders display in the tree should work with an image of the Explorer, supplemented by information in the catalog itself). Older versions were very buggy in folders view, but I'm not sure that the current version (since PSE11) is absolutely foolproof.

Move the folders step by step from the Explorer and reconnect immediately seem to be the best in your case.

Tags: Photoshop

Similar Questions

  • Windows 7 - "Try Again" error message when you move files, creating folder, etc.

    When I try to move files, create a new folder or move a file, save a file with a new file, etc, I get an error message indicating "Item not found", with a description of "Cannot find this item", "this is no longer in C:\...» "," Check the location of the item and try again.

    So far, I have tried the following:

    ·         I have run CHKDSK on the drive. [chkdsk c: r], "CHKDSK" came back without error - the disk is a disk SSD

    ·         I also ran "sfc/scannow", she also returned without error.

    ·         I uninstalled all updates that occurred during the time that this came - tested, the computer and reinstalled them.

    ·         Updates of Windows computer are all up to date.

    I have in case I have to move several files, press the button 'Try Again' to each folder that I move.  This becomes a big problem.

    Any help to fix this would be greatly appreciated.

    Dell Precision M 4800: Processor; Intel Core i7-4810MQ CPU @ 2.80 GHz, 2801 Mhz, 4 Lossnay 8 logical processors. Windows 7 Enterprise (64-bit) SP1 | 16 GB memory | SK hynix SH920 2.5 "512GB SSD hard drive

    I've posted this before, but after a few replies, the thread has been cut and has all the additional answers.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-error-message-when-moving-files-creating/4b9e607c-7163-4c04-8a78-29e65cc4bf9c

    Hello Greg,.

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You did any hardware or software changes to your computer before the show.

    Thank you for details on the question and your efforts to resolve.

    This problem may occur because of the corrupted Windows files or incorrect registry settings.

    To diagnose the problem, check if the problem occurs in safe mode.
    Refer to this article:
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

    Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

    Please refer to the suggestions of Mr Andersen replied on September 4, 2010 and check the problem with folders.
    https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/renaming-folders-causes-item-not-found-error-in/e2cf38c7-9e77-4256-89DE-6308df53d5f9

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Get the Error Message When you try to download and install Vista Service Pack 1

    Hello

    Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

    Thank you
    Andy

    Hello

    Welcome to the windows vista forums.

    1. stop the Windows Update service (make sure that you are logged on as administrator)

    Click the Start button | Control Panel | System and Maintenance | Administration tools
    Double-click Services.
    (Provide the administrator password or a confirmation if prompted to do so.)
    Right-click the Windows Update service and click on stop.

    2. Click Start, type %windir%\System32 in the search box and press ENTER.

    Find and rename the folder C:\Windows\SoftwareDistribution.

    3. start the Windows Update service

    Start button | Control Panel | System and Maintenance | Administration tools
    Double-click Services.
    (Provide the administrator password or a confirmation if prompted to do so.)
    Right-click the Windows Update service and click Start.

    This procedure will erase your history on the Windows Update Site. Not important.

    Don't forget to restart and then try the update again. If there is no corruption in that
    folder, it would be gone now.

     

    Please, try now to windows update and check if you get the error.

    You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

    http://support.Microsoft.com/kb/935791#Method3

    I hope this information is useful.

    Please let us know if you need further assistance.

    Concerning
    Rehman - Microsoft Support

  • Error message when you access files on NMH300 Explorer

    Hi, I have a problem here. The error message: "the media center doesn't answer, please confirm the device is turned on and connected to your network." appears whenever I try to access the file on the hub of media NMH300 browser. I tried to restart the unit, back to zero, but in vain. I always get the error message. I use the updated firmware 3.18.4. No idea how to solve this problem?

    Also, I can't seem to restore the firmware to version 2.17 even if I did a reset of the device by pressing the reset on the back of the unit. any help on this?

    Hello

    Try to press on and press and hold the reset button on the back of the mediahub for 30 seconds then check if its now reset to the factory settings.

    I'm curious, when you started having this problem it was in time when you created a folder under "File Browser"? Maybe the Linksys article below is the right way to create folders on the mediahub or just create a folder using the drive mapped.

    Create and delete new actions displayed in the file browser

    Anyway I hope this helps.

  • I get an error 126, openal32.dll error message when you try to open and play games. How can I fix it?

    I have a desktop computer that has Windows XP on it. For the last 2 months, whenever I have buy a game or you try to open and play a game I get an error message 126, openal32.dll is not found and the game does not open. How can I fix? Thank you

    Hello

    ·         What is the brand and model of the computer?

    ·         The game you are trying to install?

    ·         The issue is only with game in particular or all?

    ·         Have you managed to play this game before? If so, were there recent changes made on the computer before the show?

    Follow these steps and check if that helps.

    Step 1:

    I suggest you to uninstall and reinstall the game and check if it helps.

    How to change or Remove a program in Windows XP

    Step 2:

    OpenAL is related to sound and developed specifically for the audio of the game, I suggest you to update all the required drivers for the computer from the manufacturer's Web site and check if it helps.

    How to manage devices in Windows XP

  • Acrobat in Word error message when you move around the Ribbon

    Win 7 x 64

    Acrobat X, all the latest updates installed

    Word 2010

    Acrobat/Word add-in is installed

    Recently, started getting the error as Custom UI Runtime Error Acrobat PDFMaker Office COM Addin / an error has occurred by calling the "GetImage" reminder

    Error arises in Word every time I have switch between the tabs of the Ribbon in Word. Sometimes even if a new blank document is open.

    Does not affect the functionality as far as I know and the error is easily rejected, but still, it appears each time I have interact with the Ribbon.

    Ran a repair on Word and Acrobat, has not helped.

    Any thoughts?

    acrobat error.jpg

    Nice day

    Do you have any other package add-ins installed in Word?  Do you receive similar errors in other applications where PDFMaker is installed, such as Excel or Outlook?

    Workaround (because this does not seem to have an impact on the feature) is to open the Word Options, click 'Advanced' and uncheck "display software component snap-in user interface errors" in the section "General".

    Kind regards

    David

    Adobe Systems

  • Error message when you try to download files - WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.

    Original title: C:\windows\system32\icacls.exe
    For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection.  Whenever I do; try to download something or download something, I get the following error:

    WINDOWS SECURITY, these files cannot be opened.  Your internet security settings prevented one or more files being opened.
    C:\windows\system32\icacls\exe

    I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.

    Any suggestions?  I really need to download Trend Micro.

    Thank you
    Amy

    See the article below:

    ID of the KB Article: 2588679.
    Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened."

    Check the following settings:

    Right-click on the downloaded file. Select Properties.
    Click the Unlock button.

    Check the suggestions the following threads:
    http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/these-files-cant-be-opened-your-Internet-Security/7bbe6bc9-d89f-4407-81fa-ea4c24b39aaf

    Let us know if that helps.

  • I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

    I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
    One of the installation files seems to be corrupted. HR:0 x 80070003

    Hello Amawob,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    You cannot install some programs or updates.

    http://support.Microsoft.com/kb/822798

    Reset the Windows Update components.

    http://support.Microsoft.com/kb/971058

    That should solve the problem for you.

    Thank you.

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

    Original title: trying to download

    WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

    Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

    It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

    Thanks a lot for any assistance.

    scate 39

    Hello

    ·         You have Microsoft Security Essentials on your computer?

    If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

    You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

    See also:

    You can turn on or turn on the firewall in Windows XP, please see the link below:

    http://support.Microsoft.com/kb/283673

  • How to solve error messages when you try to update my CC applications, namely CC PS and DW CS6: U44M11210?

    All PS and BR apps have the same error message when you try to update

    with error code: U44M11210  

    and

    Message text: failed to extract the file. ??


    Has anyone experienced this and found a solution?

    U44M1I210 - creative cloud help / error U44M1I210 | Install updates: http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • Why do I get an Error Message When you use "Embed" to access a file png (for an asset class)?

    I use Flash Builder and Starling to create a new project. I created the initial classes for Starling running. Everything works fine.

    However, I created a class of assets (that will manage all the assets of the project) and I get an error message when you reference the png file. This png will serve as the main screen for the project. See below:

    {

    Import starling.textures.Texture;

    public class active

    {

    [Embed (source = ' assets/screenMain_background.png']

    private static var MainScreen: Class;

    public static var MainScreenTexture:Texture;

    Public Shared function init (): void

    {

    MainScreenTexture = Texture.fromBitmap (new MainSreen());

    }

    }

    }

    I have the file in a folder called 'active' which is in the main project folder. Why I get this error?

    In the "Issues" tab it reads as follows:

    "Couldn't find Embed source" assets/screenMain_background.png"

    Capture1.PNG

    you have a path problem.

    Start by adding the current directory in your src directory.  If this fails, experiement.

  • CC of Dreamweaver generates one of the 3 error messages when you use find and replace on 8.1 Win 64 bit.

    CC of Dreamweaver generates one of the 3 error messages when you use find and replace is used more than twice in a row. "While executing onLoad in bc_afterSave.htm, the following JavaScript error occurred: at line 188 of file C:\Program Files (x 86) \Adobe|. Adobe DreamweaverCC | Configuration | Shared | ' BC\JS\bc_sites.js': out of memory.

    or

    When executing RunCommand in File_Save.htm, a JavaScript erroroccurred.

    or

    While exciting getDynamicContent inAdressURL.htm, an erroroccirred of Javascript.

    Any thought - I find myself CBWMS of closing and reopening. Will work for the other two find and replace once again before the popup of messaged\s error.

    Cough, cough, cough - 38 500 pages? !  Really?  It's a big site!

    I'm not surprised, that you are short of memory.  Try to limit your F & R records or select files rather than the entire Site.

    Nancy O.

  • "File not found" error message when you save the document

    Hello

    Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

    Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

    Help, please!  I can't stop my station until I get the document to save.

    Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

    Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

  • Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

    Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

    Hello

    What type of material is actually causing the problem? Is there more information the Fix It center offers you?
    I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
    I hope this helps.
  • Receive an error message when you try to INSTALL, can someone please pick up my computer and help me install?

    Receive an error message when you try to INSTALL, can someone please pick up my computer and help me install?  I'm on a MAC Version 10.13.3.  Thanks for the help!

    to do this, you will need to contact adobe in the pst time support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

    but they can refer here for help and no one here will (or should) have on your computer.  If they do, or someone offers to contact you via Skype, you're about to be a victim of fraud.

Maybe you are looking for