Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

Original title:

Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

Hello
1. what version of Windows is installed on the computer?
2. are you aware of any changes made to the computer, before the show?
Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

Method 1:

Step 1: Perform a boot minimum troubleshooting and check which application reports this error
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

Step 2: reinstall the application.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

Method 2:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833

I hope this helps.

Tags: Windows

Similar Questions

  • System startup with the following error: this application has failed to start because BHO. DLL WAS NOT FOUND.

    Original title: APPS

    WHEN I TURN ON MY COMPUTER, A BOX IS DISPLAYED THAT SAYS: "THIS APPLICATION COULD NOT START BECAUSE BHO.» DLL WAS NOT FOUND.

    REINSTALLING THE APPLICATION MAY FIX THIS PROBLEM... The APP IS ie3sh.exe... I DON'T REMEMBER TO UNINSTALL ANYTHING... I have

    THE THING OF RESTORATION WHERE YOU PUT THINGS BACK THE WAY THEY WERE AT A CERTAIN DATE... BUT THAT WAS BEFORE THE

    MORE DATE OLD HE SAID I COULD GO BACK, WHAT HAS NOT HELPED... I ONLY AM NOT COMPUTER SAVVY, SO IF YOU HAVE AN ANSWER, PLEASE

    BREAK IT DOWN STEP BY STEP... P.S. THANK YOU I USE WINDOWS VISTA HOME PREMIUM... AND I INSTALLED ALL IMPORTANT

    UPDATES... I HOPE I'M THIS SENDING TO THE RIGHT FORUM...

    I suggest you to follow the steps below and check if it helps:

    Method 1: Try to boot in safe mode and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 3: Also try to scan your hard drive for Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Hope this information is useful.

  • error message "this application has failed to start because MSVBVM50." DLL was not found. Reinstalling the application may fix this problem. "

    If anyone can help!

    Sorry, Lorien

    Please do not post a long answer that does not help the user.

    Hello

    ucfknight05, you are missing the DLL's Runtime Visual Basic 5 (MSVBVM50. (DLL). download the Visual Basic 5 Runtime:

    http://support.Microsoft.com/kb/179492/en-us

    Best regards
    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Could not locate the explorerexe component. The application has failed to start because WININT. DLL was not found.

    When I try to login, I get the above error message. When I click on ok, just a white background rises, and I am unable to do anything else that disconnect. I tried a solution I found on the internet click Ctrl alt del then Task Manager, then applications, then new task. At that time, I was to enter a code to move the DLL file, however, when I typed in what she said, I got an error message that says that I had to enter a file name.

    tammyanne,
    Thanks for posting on the Microsoft answers Forum.  We could us a little more information about this problem and your system.
    What version of XP are you running?  What service pack level are you?
    What happened before this error at startup (new software or hardware installed)?
    Are you able to boot into safe mode or run last known good configuration?  This link explains these options: http://support.microsoft.com/kb/315222.

    Let us know this information so that we can help you. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • ;" The application has faild to start because MFC71D. DLL was not found.re - installing the application may fix the problem. »

    I'm trying to use my music software I installed recently in my computer I have get__the next message; "The application has faild to start because MFC71D. Mean what DLL__was does__that does not found.re - installing the application may fix the problem. »

    I tried to re - install several times, and I got the same results

    Hello

    This means that you can try to uninstall the software and then re-install.

    Click Start and Control Panel. Under programs, click on uninstall a program. Find your program in the list, right-click, and choose uninstall.

    When he finished, restart the computer. This will ensure that the system can get a grip on all the files will be released.

    Then download the program again and save the file to your desktop. When he finishes, right-click on the file and select "Run as Administrator".

    Let us know if this helps

    Mark <> Microsoft Partner

  • Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

    Original title: oleaut32.dll xp

    My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
    Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
    However, I can't in the operating system to do a re-install.
    Any suggestions?

    If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

    Lsass.exe - Unable to locate component
    This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

    If the missing file is the only problem, you might have to do a reinstall to fix.

    There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

    Once started in the XP Recovery Console, you must enter this command at the prompt:

    Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

    If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

    Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

    Answered in the affirmative if invited to replace any existing file.

    I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

    If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

    Here's how:

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

    Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

    Hello

    I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

    Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

    See how it works for you:

    If you see a message like this:

    Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    It is in the case Log:

    Event type: Information
    Event source: Application Popup
    Event category: no
    Event ID: 26
    Description:

    Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

    You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

    If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

    You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

    The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

    Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

    You also will be able to properly run a browser on the system afflicted to go on Internet download one.

    There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

    You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

    If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

    When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

    Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

    If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

    TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

    If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

    Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

    I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

    You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

    c:\Windows\System32

    Here is the link to my SkyDrive and you can get the file you need here:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

    When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

    When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

    You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

    You then put the downloaded files in the correct folders on your system.

    That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  • Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

    Original title: this application has failed to start because apphelp.dll was not found.

    A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

    "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

    that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

    I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

    AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

    AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

    I tried Recuva, but he could not find the file.

    How to re - install a such apphelp.dll suggested by the pop - up error message window?

    Thank you

    I thought it would be something that began with "A".

    For low overhead and free, think of Microsoft Security Essentials (MSE).

    MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

  • "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

    Original title: SiSUSBrg.exe

    "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

    Hope that this is not a virus!  Help?

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same problem occurs:
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353
    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    It will be useful.

  • applesyncnotifer has stopped working unable to locate the component that this application has failed to start because corefoundation.dll was not found. Re-install the app

    Original title: applesyncnotifer has stopped working

    pop-up that said, apple syncnotifer.exe cannot locate the component.  This application has failed to start because corefoundation.dll was not found. Re - install the app may fix the problem.

    Hello

    It's all part of itunes

    Uninstall and reinstall itunes

    Follow the information from apple to the link below

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    http://support.Apple.com/kb/HT1923

    and or ask for their support of itunes

    http://www.Apple.com/support/iTunes/

    Also try the discussions of apple itunes

    http://discussions.Apple.com/category.jspa?categoryID=149

  • Error: ApopleSyncNotifier.exe. Application has failed to start because Core Foundation.dll not found in the system startup

    Original title: AppleSyncNotifier.exe and RUNDLL

    When I boot I get 2 drop down boxes 1 to ApopleSyncNotifier.exe.  Application has failed to start because Core Foundation.dll not found.  Re-Setup, the application may resolve the problem.

    RUNDLL error loading C:\WINDOWS\nulogry.dll.  The specified module could not be found.

    How can I fix them?

    Hi saintaugie,

    1. have you installed any Apple Sync program on the computer?

    We found that this happens if MobileMe on the computer is defective. To resolve this problem, we recommend that you uninstall MobileMe and check if the problem persists.
    a. to see How to change or remove a program in Windows XP
    b. in the list select MobileMe and uninstall it.
    c. restart the computer once the program is uninstalled.

    We found the same problem on the Apple Forums.
    See Impossible to locate the CoreFoundation.dll AppleSyncNotifier.exe error

    Note: You might consider to reinstall the program if you need. However, we do not recommend to install non-Microsoft programs as Microsoft has not tested the feature.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

    I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

    Hi vlademer,

    D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

    Follow these methods.

    Method 1: Follow the steps in the article.

    Problems installing and uninstalling programs on Windows computers

    http://support.Microsoft.com/kb/2438651

    Method 2: Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

    I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

    Hello
    The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    Methods of resolution:
     
    I suggest you to download windows desktop search for additional and install.

     
  • svhost error: this application has failed to start because xul.dll not found. Reinstalling the application may fix this problem

    I got a message when I reboot my pc
    «svhost error: this application has failed to start because xul.dll not found.» Reinstalling the application may fix this problem.
    I need someone to help solve this problem.

    Let's see...

    I downloaded this zip file to see what was in it.  The version of the file in this download link xul.dll is approximately 2 years and version 1.9.0.14

    The version of the xul.dll of Firefox on my system (trying to keep up-to-date and all) is aged two weeks and version 5.0.

    I think I want to reinstall Firefox, but this isn't the Firefox forum.

  • Cannot run Real Player. "This application has failed to start because MSVCP90.dll not found. Reinstall the application may fix the problem.

    I'm unable to launch Real Player. I get a message saying that, ""this application has failed to start because MSVCP90.dll not found. " Reinstall the application may fix the problem. I did play several times in past three days, but to no avail. "I even installed the" install Microsoft Visual C++ Redistributable Package in 2010. as suggested by Joel S-Support Engineer at one of the similar Querys. I I am facing the same problem even after installing, so! The same dll missing or damaged.

    I even started recovery deleted files dll in the registry by using strange solutions on the Web "Recuva" but it is of no use.  I do not know! I even started thinking of reformatting the hard drive or changing into a new One.  It's very frustrating. Lately no Fortunately, I hit to the top of your site looking for answers! I'm still fumbling for answers!

    Kindly help me! I anticipate a quick recovery solution please!  Thanks Roy

    Hi Roykarnataka,
     
    MSVCP90.dll errors might indicate a problem of registry, a virus or malware problem, or even a hardware failure.
     
    Scan the checker (SFC) system files on your computer and check if it helps fix the problem.
     

    SFC analyzes and verifies the versions of all protected system files after you restart your computer.

    Check out this link to do the same thing:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    More information is available at: (sfc) System File Checker

Maybe you are looking for

  • HP MINI 110-1046NR {CNU0074L49): BIOS PASSWORD}

    HELLO, PLS I FORGOT MY BIOS PASSWORD CAN SOMEONE HELP ME HOW TO GET INTO MY SYSTEM BACK? THE DETAILS OF MY SYSTEM IS... HP MINI 110-1046NR... CNU0074L49. THS... GOD BLESS YOU ALL

  • Outlook Express 6 - spell checker

    I try to activate spell check in Outlook Express 6. However when I go into the Options, it is not a spelling tab. I'm also in Word 2010, and as far as I can see, the spell check is enabled in that. Help, please, Simon B

  • Card access to records liabilities previewer

    I'm the invocation of an image scene in a card previewer in my application. The application depends on a few other files in the directory liabilities. Generator overview/composer .qml files they have access to the directory /assets/? Not sure whats n

  • Windows cannot access \\COMPUTER1

    When I try to connect to a working group, it connects perfectly. My laptop can 'see' all of the computers on the network, it is able to see the shared data and files from a computer that uses Windows Vista, but when I try to access the data stored on

  • Power supply upgrade for my Dell XPS 8100?

    I'm looking to upgrade my Dell XPS 8100 power OEM 350W at a minimum 550W power supply so I can install a Blu - Ray reader & writer drive, & so I can replace the ATi Radeon HD 5570 1 GB GDRR5 graphics card with 2 GB or 4 GB of GDDR5. What would be a g