Error occurred during deployment of TS and the LabVIEW run-time engine only

Hi all
I'm new to Teststand deployment.
Now, I want to deploy a program to clean install with SP1 2012 Teststand engine, LabVIEW 2012 SP1 Runtime, VISA 5.2 DURATION.
My file in the sequence is empty. (In fact with a label only)
But I got "Internal error code - 12 making an installer... ", and" MSI error code: 110 ".
Attachment is the newspaper.
Any Suggestion? Thank you.

Thanks to KateB.

Now I find out why an error occurred.

I installed LabVIEW 2012 first, then crushed with LV 2012 SP1 but no uninstall.

I think it makes Teststand to be comfused or maybe something conflict.

Now I install LV 2012 or LV 2012 SP1 only. It works very well.

Tags: NI Software

Similar Questions

  • Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

    Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC?  I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

    Thank you!

    No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

    Rob

  • Hello! I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure. What can I do?

    Hello!

    I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure.

    What can I do?

    Save the relevant keys, then search your registry at HKCU\Software\Adobe\Director\12\Script

    If this does not help, save the entire branch and try to delete it

  • LabVIEW: error building Installer 2011SP1: LabVIEW Run-Time Engine 2013 missing 3 dependencies?

    I'm having a problem of construction of an installer in 2011SP1 of LabVIEW.

    It has been a while since I tried to build an installer but it used to work properly and building executables still works fine.

    Now when I try to compile the installer, I get "generation failed."

    The possible reasons: error generating preview for my 3.1.7 Application.

    Details:

    Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
    
    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_InitializeDistribution.vi >> IB_MSI.lvclass:Report_Preview_Error.vi >> IB_Source_Container.lvclass:Report_Preview_Error.vi
    
    Loading product deployment information*** WARNING ***NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing.  Visit ni.com/info and enter the Info Code "" for more information.
    
    ***************** Error: An internal error occurred for which the cause is unknown. (Error code -41)***************** Error Details:Error in MDF API function: _MDFCommon_GetNextLogMessageError in MDF::GetInstance - MDF static instance is not initialized!*** End Error Report**************
    
    Loading product deployment information*** WARNING ***NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing.  Visit ni.com/info and enter the Info Code "" for more information.
    

    The really strange thing is that I'm using LabVIEW 2011SP1, I don't even have installed LabVIEW 2013, not even the runtime.

    Where is the problem? Why is he still complain about LabVIEW 2013? Anyone seen this before?

    Troy,

    This behavior makes me assume that you updated certain components from the past. There are drivers of OR who use LV components (e.g., AFAIK the DAQmx of Test panels).

    Update you things? If Yes, why don't you LV 2013 RTE installed as it would be necessary for full functionality of the driver?

    Norbert

  • ??? Insert the "NI LabVIEW Run-Time Engine 7.1.1.

    OK everyone, I'm "dead in the water" when launch LabVIEW 2014 SP1 after a long night of installing updates to Developer Suite 2014 DS2 SRL 2015 DS1 SRL

    Search Forum has this old thread

    http://forums.NI.com/T5/LabVIEW/error-1334-in-LabVIEW-run-time-engine-7-1-1-Setup-when-launching/TD-...

    Since 2008

    NOTE: at least its looking for a CD ROM is not a floppy disk!

    Hooray!

    I've recovered from that.  And Yes, I'll tell you how that you can do it yourself if this happens to you:

    From the control panel select programs and features, then National Instruments software.

    Scroll to "LabVIEW Run - Time Engine 7.1.1" and select Repair

    You will need the following:

    • Device drivers OR August 2014
    • C:\ProgramData\National Instruments\Update Service\Installers\NI_20150630_0736
    • NEITHER Developer Suite 2015 Encarta software
    • Patience
  • Error-18004; Access to the DLL of the LabVIEW Run-Time Error engine. TS 4.2.1 / LV 2010

    When I try to run a VI that is reentrant in an execution at the same time, I get this error.  The details of the error is: LabVIEW: the method or property is not supported in this version of LabVIEW.

    This is performed under the LV 2010 Simple operator Interface.  The TestStand engine is version 4.2.1 with runtime adapter 2010 LV.

    If I save to an earlier version to LV 2009 SP1, then assign the adapter TS 9.0.1 (2009 SP1), it works.

    Can anyone reproduce this error (bug?)?

    you have the latest updates for TestStand using LabVIEW 2010?

    http://digital.NI.com/public.nsf/allkb/7D728B70F167CE088625776E00582C7B?OpenDocument

  • Error 1335 during installation of NI LABVIEW Run time engine 2009

    Hello

    When installing Labview 2009, I get the following error.

    Error 1335: The file 'mib100.cab' required for the installation is damaged and cannot be used. This may indicate a network error, error reading from the CD-ROM, or a problem with this package.

    I tried to install the software using 2 different CD-ROMs, and hard drive. I also uninstalled software OR previous and tried to install Labview again.

    Screenshot of error during the installation of the hard disk is attached.

    Thanks in advance,

    Hyacinth D

    The installation was successful, after replacing the DVD drive.

    Thank you!

    Corinne

  • Improved LabVIEW 8 to 2013 and VI asked now to find the installation package for Run-Time Engine 7.0

    I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit).  The machine has also of LabVIEW 8 is installed, which is what I used before the upgrade.  I opened a VI has been created in LV8 and then saved it and all its subVIs in LV2013.  Now when I open the VI in LV2013 and try to run it, a window opens asking me to find the installation package 'lvruntimeeng.msi' for LabVIEW Run-Time Engine 7.0.  If I cancel this dialog box, and the subsequent message, indicating that the installion files were not, the VI appears (at least of the initial inspection) to function normally.

    I have closed LabVIEW, downloaded Run-Time Engine 7.0 on the site of NOR and tried to install it, but I received a message saying that it is already installed (as I had suspected).  How can I determine what part of the VI and/or its subVIs tries to make use of Run-Time Engine 7.0?  If not, how can I get LabVIEW to use instead the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?

    Bob_Schor wrote:

    You run your VI of a project?  If so, you can watch the dependencies and get an idea of what live "in charge", you might have.  There may be "something old" in your code in LabVIEW 8, which was replaced in 2013, but ' plane still around "-If you can identify it, you can probably replace it with its"more modern"equivalent

    If you do not have the VI in a project, you can simply open LabVIEW, create a blank project and add your first level VI.  If all of your relevant screws are in a single folder, add the entire folder.  Now look in the dependencies.

    BS

    Yes, I run the VI from within a project of LV.  After some more research in the knowledge base OR I could solve the problem by using the following procedure:

    1. use the measurement and Automation Explorer to uninstall Run-Time Engine 7.0

    2. restart the PC

    3. open the project, close the project by choosing "save all".

    4. restart the PC

    5 reinstall the Run-Time Engine 7.0 using a file downloaded from ni.com

    6. restart the PC

    7. open the project, close the project by choosing "save all".

    8. open the project and run the VI.  No more messages on LabVIEW, trying to find the Run-Time Engine 7.0.

  • VISA writing differs between TS and LV Run - Time Engine development agencies

    Hi all

    I made a request on LabVIEW to test the BERs (Bit error rate), and I used the Write VISA between two COM ports to Exchange data.

    Everything works great using just of LabVIEW.

    Later, I used TestStand to call my application (VI). Adapters of LabVIEW TestStand have been set by default on the development system , and everything works OK!

    Finally, I had to disable the development system and to define the types of adapters LabVIEW of TestStand for LabVIEW Run-Time Engine and I noticed that the speed of the exchange of data between two COM ports significantly decreased.

    The only difference was the speed... because all data (changed slowly in this case) happened correctly on the other COM port too.

    The symptom was the same that decrease baud rate... but baud rate and all other configurations remained the same. The only difference was the change between the development system for the runtime to notice this reduced speed between the data exchanged using VISA Write.

    All the solutions for this?

    Thanks in advance

    João

    Hi all!

    I'm sorry, I forgot to reply to this thread...

    Solution was change the way VISA WRITE of "asynchronous" to "synchronous" to book a thread just to WRITE visa.

    The problem here was something like this (?): TestStand used all available threads and when we wanted to WRITE of VISA, the thread has been busy and VISA would wait until the wire emerges. After changing to syncrhonous, there was a thread dedicated to this process (?).

    Now, everything works the same using LabVIEW Run-Time Engine or system deployment.

    Thanks for the help Chris and Norbert :-)

    João

  • Creating a single setup program, including the DSC Run-Time module

    Hello

    I would like to know if it is possible to add the DSC run-time of an installer?

    I'm using LabVIEW and DSC 8.6 and I do not have the license for the DSC run-time.

    In the "Additional installers", I checked the health empty boxes:

    • OR Distributed System Manager
    • NEITHER deployment DSC increased support for LabVIEW 8.6
    • OR LabVIEW Run-Time Engine
    • NEITHER Measurement & Automation Explorer 4.5
    • Engine OR Variable

    When I open MAX after the installation, I do not see the database of the Citadel, and there is no trace of the execution from DSC module.

    How can I have a single installer that will do the work?

    Thanks in advance

    Hello

    Yes, as long as your customer has performance DSC system installed and enabled on their computer, they should be able to use your exe with Setup included. Then you wouldn't need an installer for it because it would be already installed and the computer should have MAX and the database of the Citadel. You will not be able to install the RTS as an extra Installer, unless you activate it on your machine. I hope this helps.

  • Where the last installation program LV2010 Run-Time Engine?

    Sorry for this absurd question, but after a half hour of roaming the site I can't find an installer LV2010 RTE.

    Would it not be this difficult?

    Could someone tell me please in the right direction?

    Thanks in advance!

    http://lmgtfy.com/?q=+LV2010+RTE+Installer

    Sorry, but I love this site sometimes.  I found the search function OR be so difficult.

    Or click on Support Services & > NOR drivers > software > LabVIEW Run - time Engine

  • Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

    Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

    Try to update via iTunes.

    See you soon,.

    GB

  • Microsoft Fixit error "an error occurred during the download of one or more components and cannot run the Troubleshooter"

    Original title: cannot run FixIt.

    With the help of Vista Home Premium, sp2, 32-bit on Toshiba Satalite A135

    I tried for days to find a solution for the reason why I can't run software 'MR FIXIT' or "MICROSOFT FIXIT" auto diagnostic I downloaded several versions of the software and saved, but when I try to launch it I stopped.  The following message appears: "toubleshooting cannot continue b/c an error has occurred."  An error occurred during the download of one or more components and cannot run the troubleshooter. »
    These versions I've tried lately:
    microsoftfixit. Program.installuninstall.RNP.84258196752136210.7.1.Run
    microsoftfixit. Program.installuninstall.Run
    microsoftfixit. WinSecurity.fisc.8425861308153696.4.1.Run
    microsoftfixit. Wu.FISC.8425861308153696.4.2.run
    852581157233326805.5.1.run
    I don't know if the problem is related, but I was also impossible to install the download: security for microsoft .net 1.1 SP1 framework update... (kb2656353).  I tried to install this download since January of 2012.  The reason why I tried to use the auto diagnostic software should fix my problem of installation of the security update.  I remember somewhere along the way, getting the error message that some files were corrupt.  Your help would be greatly appreciated.

    Hello

    Are able to run fix it?

    You can also post your query in Microsoft solve this forum. Please visit the link below to find a community that will support what ask you:

    http://social.Microsoft.com/forums/is/fixitcenter/threads

  • Reference Dell backup and restore - "an error occurred during the creation of the backup of the system"

    I have a Dell XPS-8700 running Windows 7.  I bought the Dell Backup and Recovery Premium Edition.

    I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive.  However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.

    How can I create a backup of the system?  Why I get this error?

    Thanks for all the info. My situation sounds very similar to yours.

    I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.

    V1.7.1.2 downloaded and executed new facility.

    When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.

    As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.

    However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...

    In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.

  • I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

    I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

    Hey lee,

    Are you still facing this problem?

    Have you tried accessing the service by using the browser: http://cloud.acrobat.com/exportpdf

    Kind regards
    Rahul

Maybe you are looking for

  • I keep getting a pop-up asking me to install programs. How can I stop them?

    I'll be on a site and when I clivk on a search window a popup asks me to install, Flash Player, google chrome, improve your brain, etc. When I close that window, the site, I was working on is frozen. I need to prevent this. Help please.

  • Adobe Acrobat

    When I go to the mozilla plugin check it says updated Adobe PDF plugin for Firefox and Netscape '9.4.1' and then when I click on update, that it brings me to the adobe site, then I click Download and it says missing plugin and then I have to click ma

  • Stage of counting

    You have to have your iphone on you so that the watch to not count? If I run I will leave my iphone and just wear the watch. Or if I decide to play basketball it will count the steps?

  • Connect the linksys to a wireless modem

    Hello I want to connect to my wireless router linksys WRT54GL to a vodafone wirelesss (r206) modem first of all, I want my linksys to get vodafone wireless signals and 'put' on local network (to connect my PC to the internet, the pc, it doesn't have

  • Small App active Clip, where are stored the screenshots?

    Last year, I used a lot the small active Clip of the App to take screenshots. They used to be stored in a folder named Clipper, but as of August 5, 2015, none is stored here more. Where can I find them? I use Lollipop 5.1.1 version 23.4.A.1.232. Than