Error occurred in making the disc of recovery with Dell backup and recovery

Similar Questions

• An error occurred in consolidating the discs: msg.snapshot.error - DUPLICATEDISK.

  Try to remove some snapshot using vSphere, it fails.

  Tried to turn off the virtual machine. Create a new one and then consolidate but it fails.

  «An error occurred by consolidating the discs: msg.snapshot.error - DUPLICATEDISK.»

  Any ideas?

  Do not know what is happening, I understand that the snapshots are in a bad state for a reason I don't understand, however, I just want to remove all the.

  Ultimately that I restored a backup that comes with Veeam this backup did not have snapshots but was the most recent copy.

  Restore the virtual machine, and there is no instant, there was no need to consolidate.

  Some people said that to fix the error, you must fix the instantaneous chain. Which is probably a particularly risky and complex process with multiple nested snapshots. I have this mark as resolved, but if someone wants to contribute on how to fix this problem manually, or simply to force a fresh copy and to ignore snapshots please post and share.

  Thank you

• How to create a recovery media factory with Dell backup and restore on Windows 10 1.6.2.4 v?

  I got today a Dell inspiron 3521 a customer, without warranty, after some checking, I discovered that the hard disk has errors and needs to be replaced

  No problem, the only problem is... I have no installation of Dell Windows 8 media. The laptop is updated to Windows 10 last year. In programs and features, I see that Dell backup and restore 1.6.2.4 v is installed. When I search the Dell backup or watch all the apps installed I can't find the program. So I can't run the program to create installation floppies

  When I go to:

  program/PC (x 86) / Dell backup and recovery, I see a lot of files and 4 records, but no configuration file.

  So my question is, how do you create a Dell Windows 8 installation media? Can I use after installing the new hard drive, reinstall Windows?

  For good order, I can't, until now still approach the hard drive.

  Who knows the solution to install the software dell of origin on the new drive?

  The application must be updated for Windows 10 - you can get it as a download from Dell.

  However, if 10 is already installed and enabled, you can also manually install WIndows 10 without the need of a product key - that way, however, do retain none of the applications Dell preinstalled on the system (which is not very important, as some of them such as PowerDVD would require a paid upgrade to work with Windows 10 in any case).

  DBaR 1.9 is here:

  

• vCenter esx 5.5 - consolidate the snapshot fails with an error occurred by consolidating the discs: msg.snapshot.error - NOTFOUND?

  I don't know why is this error?

  I got an error that the virtual disk space was low tool and my vm has been automatically turned off.  I scoured the data store and I saw old clichés that were very important which could be removed.

  I went into the Snapshot Manager and has tried deleting them and started getting the error msg.snapshot.error - NOTFOUND.

  The clichés that I deleted since the Snapshot Manager always appear when I browse the data store, but are locked.

  I really need to be able to consolidate these pictures in the parent company.  100 GB free on the store of data right now.

  If I try to take a new snapshot it fails and says: an error has occurred when taking a snapshot: msg.disklib.OPENPARENT.

  I also noticed after the fact that my hard drive is pointing to the most recent snapshot rather than to the parent.

  I think if I edit the .vmx file and change it so that it points to the parent would be the load, but then I will not lose the clichés?

  I like to keep at least the most recent roll in parent company snapshot.

  Any ideas?

  Thank you!

  Erin

  Hello!

  Thanks for the reply.  Unfortunately, a part of the problem is that the data store was running out of space.  If I didn't have space or time to try a clone.

  I did a reboot and after that has been able to update the CID to get the right string after I changed the hard drive to point to the base file, power, created a snapshot, turned off and pointed to the hard drive in the last snapshot.

  But there was a corrupt, one in the list since my VM corrupted after all the snapshots consolidated (+ 6 hours later).

  I didn't have a lot of time to continue to troubleshoot or try a clone on another virtual server, we have little space so I started from scratch.

  Fortunately, I discovered that my backups of the data have been very well, I so reinstalled Windows and started from scratch.

  Thanks for the suggestion though!

  Hope this helps someone else because I just watched as he went to work, and I don't know if a clone would have gotten it going or not.

  Erin

• DBRCrawler belongs to the directory Dell backup and recovery?

  Today I noticed in my task manager, a process called DBRCrawler and when I open the file location was in C:\Program Files (x 86) \Dell backup and Recovery\Components\Shell.

  Is this normal or should I someone spying on my computer?

  Hi all

  I'm the senior engineer Qualtiy for Dell backup and restore.  DBRCrawler is a key component of Dell backup and restore.  Its function is to ensure that the use of various application databases are synchronized between them.

  It is the name of the file that triggered your concern?

  Thank you very much

• Reference Dell backup and restore is unable to create a DVD of recovery on Windows 8

  Dear Dell,

  I am creating recovery discs "Dell backup and Recovery application" but when I was asked to insert the second DVD, the optical drive keeps rejecting DVD. The application will not continue to burn the second DVD and seems to be frozen. I tyied with different DVD brands/manufacturers and also-/ + r unfortunately. The question remains. I could find this 593906 article published 21-01 - 2013 (http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&cs=19&docid=593906&doclang=en&l=en&s=dhs link). Although I did the updates, I'm still not able to create recovery discs!   File: after having inserted the Disc 3 application gives the message "Dbr.exe-" not found disk and stays there and rejects the DVD.  I spoke with the Greek team of Dell. I was told that warranty does not cover the support of sw even if my unit is less than a week. Furthermore, I learned that although "Dell backup and restore" application said THAT DELL is not actually a Dell product so they can't support. They my proposed to use the recovery of files from windows 7 place (which needs at least 8 DVD!). As you can understand it's a workaround and not a Solution.

  I hope that someone from Dell will consider the issue and to come back with a precise answer and a permanent solution.   (Model: inspiron 15 3521). Thank you

  Hi ylikonomos,

  You can try to uninstall and reinstall Dell Backup and Recovery Manager and Dell Support Center. Follow these steps:

  • Press the Windows key + 'X' on the keyboard.
  • Select "Programs and features" in the context menu that appears in the lower left corner.

  

  • In the list of applications, uninstall Dell Backup and Recovery Manager and Dell Support Center.

  Below, check the version of the BIOS installed on the laptop. Press Windows + "R" key, type msinfo32 and press ENTER.

  

  

  Identify the version of the BIOS. If A04, the update of the BIOS is not necessary. If this isn't the case, update the BIOS. Before flashing the BIOS please check this following:
  * No external device (printer, USB stick, SD card, DVD) must be connected.
  * All other programs should be closed and saved documents.
  * The power adapter and the battery must be connected during this process. The battery must be 10% or more than 10% of charge.

  Here is the link for the update to the BIOS: http://dell.to/VBwSAh. The laptop restarts after this update.

  Visit this link: http://dell.to/VBz1fr and click Dell Support Center. Download and install the application.
  Once done, visit this link: http://bit.ly/UUjIs0 and install Dell Backup and Recovery Manager. Restart the computer and check if you are able to create the recovery media.

  Please, try the following steps and share status.

• Reference Dell backup and restore - "an error occurred during the creation of the backup of the system"

  I have a Dell XPS-8700 running Windows 7.  I bought the Dell Backup and Recovery Premium Edition.

  I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive.  However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.

  How can I create a backup of the system?  Why I get this error?

  Thanks for all the info. My situation sounds very similar to yours.

  I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.

  V1.7.1.2 downloaded and executed new facility.

  When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.

  As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.

  However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...

  In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.

• FAILED: An error occurred during conversion: "the operation encountered a network error.

  Hello world.

  I used VMware Converter Standalone 6.0 converter Server 2003 on Hyper-V to host ESX to vCenter.

  Hyper-V have IP: 10.132.2.200

  vCenter have IP: 10.132.2.177

  ESXi host have IP: 10.132.2.192

  We have no political firewall for 3 IP this. All ports are open in the firewall.

  But when I convertering 1% who have the error with the State: FAILED: an error occurred during conversion: 'the operation encountered a network error'

  So can you help me fix this case?

  Best regards.
  

  Hello Hongchuong

  It really looks like a secure network communication. You write no firewall blocks but we will go into more detail. The connection must be established from the Hyper-V (10.132.2.200) host to the ESXi (10.132.2.192) host on port 902, as in log lines:

  2015 07-12 T 14: 03:46.634 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] establishment nfc connect to host 10.132.2.192 port 902

  2015 07-12 T 14: 03:47.193 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] disc Sysimgbase_Nfc_PutFile source: Disks\Hyp2K3-Goc_5110F977-7064-4B81-9452-BDAE36EE9C9D.avhd hard E:\MayAo_Hyp\Hyp2K3-LT\Virtual, target disc [Datastore-SAN2] Hyp2K3-HDND/Hyp2K3 - HDND.vmdk

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] NfcFile_SendMessage [NFC ERROR]: data send failed:

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] the operation encountered a network error - failed to send of data message

  2015 07-12 T 14: 06:45.056 + 07:00 error vmware-converter-agent [03900] [sub Originator@6876 = task-1] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError "the operation encountered a network error" (error code: 3)

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] SSL: SSL unknown error

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = default] [, 0] NfcSendMessage [NFC ERROR]: send failed: NFC_NETWORK_ERROR

  An easy way to try the connectivity is telnet from the Hyper-V host to ESX host on port 902

  I see you have also tried again to destination 10.132.2.191 with the same error.  It is possible that Hyper-V firewall is blocking.

  HTH

  Plamen

• message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  Do you mean, there is an error message about problems with access rights? (toegangsrechten?)

  Where your photo library is stored? In your pictures folder, or on an external drive?

  You share the photo library with another user?

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details"

  When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details". Unfortunately, there are no errors listed below and the green bar is frozen on the screen. The message remains in my Outbox and repeated again and again sending. There is absolutely no record and file sent in my sent box. TIA - Ernie

  You have apparent dbx file corruption. A common problem.
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __

  I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".

  But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.

  To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?

  Thanks for any help.

  You have a corruption of dbx file easily corrected.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Help required with error 0 xC0000001 when opening DULL of the start menu and also impossible to create the recovery Dell backup and restore file.

  I use computer dell laptop inspiron 15 5558 with 8.1 windows preinstalled in it.

  I wanted to reinstall windows but I have no recovery media. Also I'm unable to create a new recovery media from Dell backup and restore. Also, I am unable to open feel of backup and restore in the start menu as this error comes up on screen

  Its always not available on him would happen, rumors were that he should have been made available yesterday, but Microsoft decided not to release it yet:

  http://winsupersite.com/Windows-10/Windows-10-build-10586-heads-slow-ring-insiders

• I'm trying DVD maker allows you to create a slideshow of photos and music: "year error occurred when burning the DVD.

  I'm trying DVD maker allows you to create a slideshow of photos and music. I can set up just fine. When I try to burn the DVD, I get an error message while it's coding. "Year error occurred when burning the DVD" no other information available. Any thoughts on the problem and how to fix it? I can save the project.

  Running windows 7

  original title: cannot burn DVDs

  Hello

  You can disable video filters in Windows DVD Maker, and then check.

  Video filters in Windows DVD Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

• An error occurred while running the installationCheck for "indesign_install" tool

  When I try and install local versions of CC products that have been provided for me under license by the company that I work, I get an error:

  An error occurred while running the installationCheck for "indesign_install" tool

  Screenshot is below. This is a brand new macbook also (screenshot below), so I don't know why this is happening. Help them to do the work of installation, or as to why this is happening would be appreciated.

  Thank you!

  

  

  

  Hi Todda,

  I'm not sure people in the download, installation, commissioning forums will be able to offer a solution, given that most of us know better in individual licenses. There are some members of the Adobe staff who jump in, and they may be able to help. If you don't want to wait, however, I would recommend first investigate with the administrator of your business licenses. You can also get help by contacting Adobe customer service.