error occurs, DMM software repair, error goes far - rinse and repeat

This error first happened early last year, then it took place last month and now he's out twice this week.  What could cause a missing library repeatedly disappear?

The error is in TestStand, but originally in in LabVIEW:

I don't remember not what I did the first time I saw this error, but the last three times it happened that I fixed it by repairing OR DMM installation:

Hi Jim,.

I looked through the technical report and nothing really stood out. Something obvious that we could / should do is to 3.0.2, which is compatible with LV 8.2.1 OR DMM. Technical report, I noticed that you have LV 8.5, which supports the DAQmx 9.2.2 and the latest versions of our drivers. You can check if you have the same problem when the screws are saved in LabVIEW 8.5. "' To do so, you would just open your compilation project and the mass, or if it's just a VI go Tools" Advanced "mass compile. Let me know if any of these steps resolves the problem.

Kind regards

Tags: NI Software

Similar Questions

  • I get the rror message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your administrative COMPUTING

    I get this error message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (148: 3) "How can I fix it? When I reinstalled the software, I get a message that I have an invalid serial number.

    Hi John,.

    Could you please the version of Acrobat you are using, and also work on the operating system?

    To check the serial number of your product, you may return the following document.

    Quickly find your serial number

    If you are using windows you can see the following link for more information on the solution to the existing problem.

    https://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

    If you wish to contact Adobe support team, please visit the following link.

    http://helpx.Adobe.com/x-productkb/global/Service1.html

    Please click the blue button "Still need help" to connect with Adobe executives.

    Let us know how it goes. In case you need more assistance write us back.

    We would be happy to help you.

    Concerning

    Sukrit diallo

  • I get an error message ' Error: 150:30 ' after I had my computer repaired. Workshop repair completely dismantled my machine and reloaded the OS, Yosemite 10.10.1. tried to download an update of licensing, but can't get to open. ???

    Adobe Photoshop CS4

    I get an error message ' Error: 150:30 ' after I had my computer repaired.

    Workshop repair completely dismantled my machine and reloaded the OS, Yosemite 10.10.1.

    I tried to download an update of licensing, but can't get to open. ???

    My machine was originally a clone of another Mac. Not that it looks like a brand new computer.

    Maybe there's something in the system preferences to change? I have disabled firewall and allow downloads of all parties.

    Thanks for your help!

    Joe

    You can download installer CS4 here: products CS4 download

    After installation, the software is returned to 11.0.0, then here's the updates, if help > update does not work.

    Updates

    Gene

  • An authentication error occurred using your identification code Adobe deconnectez_ you and restart Muse and connect you... nothing changes.

    An authentication error occurred using your identification code Adobe deconnectez_ you and restart Muse and connect you... nothing has changed.  Under preferences to Muse I see the username and password correct, but under "switch account", I see my old username. Attempt to rewrite with the new username and pswrd is not allowed.Screen Shot 2015-11-10 at 12.57.48 PM.pngScreen Shot 2015-11-10 at 12.58.17 PM.png

    Can anyonehelp me?Screen Shot 2015-11-09 at 3.25.06 PM.png

    On click to change the account it should allow you to delete the existing account and add new.

    Thank you

    Sanjit

  • Whenever I try to install and update creative cloud, he's going to halfway and stop the download says "Setup could not access the critical file (error code46).

    Whenever I try to install and update creative cloud, he's going to halfway and stop the download says "Setup could not access the critical file (error code46).

    Hello

    Please refer to the instructions mentioned in the link below, it should help:

    Cannot install Creative cloud installation - error code 46

    "Setup could not access a critical file. Please try to reinstall. (error code: 46) »

    Stop creating cloud download

    Let us know if this was helpful.

    Kind regards

    Bani

  • the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

    Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

    Hello

    -Don't you make changes to your computer because of which the question began?

    I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

    How to troubleshoot a Stop error 0x0000007E in Windows XP

  • Several Codes error error 80070652 x 0 and 0 x 643

    Hello

    I need assistance with several errors in my computer. I would have liked to just call the technician by phone but maybe because the computer is now the policy of extended warranty may be that it is no longer available? I have a desktop of Microsoft Windows XP Media Center Edition 2005. Initially, I tried to uninstall my Zune software but couldn't because a dialog box said there was another program, still trying to install (error 0 x 80070652). I was not aware of such a program, but I did not know that Microsoft Service Pack 1.1 was not installing correctly so my hypothesis was the following: I need to know why MS 1.1 is not installed. I received the error code 0 x 643. When I tried to uninstall and reinstall each SP as I had done in the past when I had this problem, I was unable to re - install updates of the framework because I got the message from one another program is trying to install. I have not tried anything since and I need your help fast because I'm a student academic who is fixing this problem for my parents before the end of break.

    I think that the McAfee had in fact expired.

    Ouch. Hope that doesn't end up being a problem.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Norton and McAfee applications are known to do not uninstall or upgrade properly. Roll up your sleeves & cross your fingers...

    [You may want to print these instructions for reference offline. [If a step said to restart, restart! ]

    1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some, you have a copy of your key of handy product, uninstall Norton Internet Security and LiveUpdate and all Norton Add ons via Add/Remove programs.

    4 IMPORTANT! -Online enable WF immediately after the reboot!

    NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

    5. double-click the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

    5. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

    6. do a clean install of Norton Internet Security 2012 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run (Norton) LiveUpdate until you get a prompt "no update more".

    8. click right on the following link & SAVE to download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

    8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop.

    8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above & double-click on the script (i.e., ie8 - rereg.cmd) to run the command, then restart again.

    9 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

    Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

    If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

    10. check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

    11. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

    11. b double-click the file that you saved in # 11 above & accept invites him to MERGE with the registry data.

    12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

    13 IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/971058 from => and run the automated troubleshooter from end to end. [3]

    14 restart once more.

    15 open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (for example, KB2572067;) KB2656353).

    -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

    Tip: Do NOT install any other updates software optional or any updated material in option .

    16. in response to this post with a status report.

    Good luck!

    ==================================================
    [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

    [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

    [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

  • In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

    I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

    I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

    In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

    I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

    I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

    I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

    "You must be authorized to perform this action."

    You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

    After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

    Then I tried to delete a file in a different location on the external hard drive and the message

    "You need give permission to delete this folder.

    When I clicked on continue what he deleted

    I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

    "You need permission to delete this folder.

    When I clicked on continue he grew up:

    ", You need permission to perform this action."

    You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

    When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

    After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

    "Cannot perform this action because the folder or the file is open in another program

    Close the folder or file, and then try again.

    When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

    Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

    (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

    I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

    I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

    "You need give the administrator permission to move this folder.

    When I clicked on continue as he moved the folder

    Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

    "You need give the administrator permission to move this folder.

    By clicking on continue he grew up

    "You must be authorized to perform this action."

    By clicking on try again, just to repeat the error message and could not undo the move

    I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

    "You must be authorized to perform this action."

    When I clicked on continue he grew up

    "You must be authorized to perform this action."

    You need permission from the administrator of the computer to make changes to this file.

    When I clicked on Try Again, he said.

    "Cannot find this article.

    It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

    When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

    The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

    When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

    I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

    "Cannot perform this action because the folder or the file is open in another program

    Close the folder or file, and then try again.

    He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

    After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

    I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
    "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

    He then mentioned

    "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

    with no information on how actually access HKEY_CURRENT_USER

    I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

    but there is no entry "DisableThumbnailCache.

    I researched and found that you can add it in

    http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

    I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

    and yet, there was no entry on DisableThumbnailCache

    The second method mentioned in

    http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

    has been to access via the Group Policy Editor

    I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

    A folder titled "for Windows 7 Group Policy Editor.

    a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

    Setup.exe

    The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

    So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

    I went back on the WindowsSeven Forum and found advice in the thread

    http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

    Title: how to open the local Group Policy Editor in Windows 7

    The tips were:

    To search for a group policy or the registry key, value, etc., see:

    Political research group

    The link above leads to:

    "The GPS is going to move to a new end area January!

    http://gpsearch.azurewebsites.NET
    You will be redirected in 15 seconds! »

    I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

    GetCategoryDependencies() - 500ServerError

    This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

    At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

    Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

    It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

    As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

    And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

    And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate

  • Software Repair Wizard does not load in Windows XP Home Edition.

    I HAVE A HEWLETT PACKARD COMPUTER RUNNING WINDOWS XP HOME EDITION NOT SE NOT LOAD MY 'SOFTWARE REPAIR WIZARD"BECAUSE THE SYSTEM CANNOT FIND THE FILE"FLASH STUDIO PRO ERROR HANDLER.  I SEND AN E-MAIL TO HP SUPPORT OFFICER AND HE ALWAYS SAYS NOT AVAILABLE AT THIS TIME TO SUPPORT

    original title: NEED HELP TO GET SOFTWARE PROGRAM ASSISTANT FOR REPAIRS

    Hello

    Have you made changes on the computer before this problem?

    The following thread might be useful: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/Sonic-Software-Update/td-p/377117

  • My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

    My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

    Hello

    Did you change your computer before this problem?

    You can follow the suggestions and check out them.

    Method 1

    You can follow the procedure in the article.

    How to resolve problems connecting to Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/818018

    Method 2

    You can reset the Windows Update components.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 3

    You can download and run the system update readiness tool.

    Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

    Method 4

    Step 1:

    Place the computer in a clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    Step 2:

    You can manually download and install updates from Microsoft Download Center.

    Microsoft Download Center

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 5

    You can disable temporary of your security software.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

    See also:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • "MMC has detected an error in a snap and unload it. Launch errors... Please help!

    I try to use the software provided with an external hard drive and cannot launch the it, I get an error launch. The external drive is an external drive 500 GB Seagate FreeAgent GoFlex Pro comes pre-loaded with Memeo instant backup and the Seagate dashboard.  I could connect the HDD and install programs, but when I try to open them I get «dashboard of Memeo Launcher has stopped working...» Windows is checking for a solution to the problem... "and then nothing.  I contacted Toshiba (the laptop manufacturer), Seagate and now I want to know if anyone here can help you. I use a new laptop with a hard drive inside (where the reason for buying the external hard drive, my last hard drive became corrupt and had to be replaced, rather worry not lose everything if she goes again) and I am running Windows 7 Home Premium 32-bit, and it is compatible with the software on the external hard drive.  When I tried to fix the problem with the Seagate tech support, I encountered the error "MMC has detected an error in a snap and it will unload" and I can report the problem/close MMC or "unload the snap and keep it running".  When I select this option (which it is by default), I get the following:

    Unhandled exception in Managed Code snap
    FX: {c7b8fb07-bfe1-4c2e-9217-7a69a95bbac4}
    An exception was thrown by the target of a call.
    Exception type:
    System.Reflection.TargetInvocationException
    Exception stack trace:
    at System.RuntimeTypeHandle.CreateInstance (RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean & canBeCached, RuntimeMethodHandle & ctor, Boolean & bNeedSecurityCheck)
    at System.RuntimeType.CreateInstanceSlow (Boolean publicOnly, Boolean fillCache)
    at System.RuntimeType.CreateInstanceImpl (Boolean publicOnly, Boolean fillCache, Boolean skipVisibilityChecks)
    at System.Activator.CreateInstance (Type type, nonPublic Boolean)
    at System.RuntimeType.CreateInstanceImpl (BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, Object [] activationAttributes)
    at System.Activator.CreateInstance (Type type, BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, Object [] activationAttributes)
    at System.Activator.CreateInstance (String assemblyName, String typeName, Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, object [] activationAttributes, evidence securityInfo, StackCrawlMark & stackMark)
    at System.Activator.CreateInstance (String assemblyName, String typeName)
    at System.AppDomain.CreateInstance (String assemblyName, String typeName)
    at System.AppDomain.CreateInstanceAndUnwrap (String assemblyName, String typeName)
    at Microsoft.ManagementConsole.Internal.SnapInClient.CreateSnapIn (String assemblyName, String typeName)
    at Microsoft.ManagementConsole.Internal.ClassLibraryServices.Microsoft.ManagementConsole.Internal.IClassLibraryServices.CreateSnapIn (String assemblyName, String typeName)
    at Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart)
    at Microsoft.ManagementConsole.Executive.Operation.Start)
    to Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation (operation)
    to Microsoft.ManagementConsole.Executive.NamespaceExtensionComponentData.GetScopeNodeForExpand (IDataObject dataObject, IntPtr hScopeItem)
    to Microsoft.ManagementConsole.Executive.ComponentData.OnExpandSync (IDataObject dataObject, IntPtr hScopeItem)
    at Microsoft.ManagementConsole.Executive.ExpandSyncMmcNotification.OnNotify (IntPtr dataObject, arg, IntPtr, IntPtr param)
    at Microsoft.ManagementConsole.Executive.MmcNotifyTarget.Notify (IntPtr dataObject, eventType NotificationType, arg, IntPtr, IntPtr param)
    at Microsoft.ManagementConsole.Executive.ComponentData.Notify (IntPtr dataObject, eventType NotificationType, arg, IntPtr, IntPtr param)
    I tried to find a solution online, but the Microsoft Fix - it tool does not work on my operating system.  I also tried that fix environmental variable of all WAY and also has not worked
    .  I can't believe that there is no solution to this problem available and I can't imagine why Microsoft made a patch available for only PART of its operating system.
    Can anyone help? I can probably use the external drive without the software, but for those who want to manually move the files to back up, and on the other hand, it beats paying more money for a better player with preloaded software, if you do not use the software.  And because it came with the software loaded on it, going back to the retail store is not an option.
    Someone at - it some light on this would be really appreciated.  I won't have one problem throwing another thing - just the software for the external drive. I already have the uninstall/reinstall the software thing fact, several times, and she even got to have to perform a system restore and uninstall it again. Also reformatted the external hard drive & reinstalled. No luck.

    Hello

    ·         How is Windows reinstalled on the new hard drive internal?

    ·         You are able to install other software?

    I suggest that you create the new user account and check if the current profile is corrupted and try to install the software and check if the problem persists, proceed in the link below:

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  • I got this error: 503,0. And I can't publish my new update?

    I got this error: 503,0. And I can't publish my new update?

    I just change one word in the Iphone and publish, and then got this message below?

    Screen Shot 2013-10-12 at 11.27.26 AM.png

    And now cannot publish, - what?

    Hello Hanna,

    This occurs because of migration goes for Business Catalyst right now. State is updated here: http://status.businesscatalyst.com/

    More details here: http://adobebcmigration.com/

    Kind regards

    Cristian Radu

  • DMM software does not.

    Why the digital multimeter (DMM) software does not work if the NI ELVISmx Instrument Launcher is?

    Initially, I installed subsequently myDAQ NI 2015 that included the NI ELVISmx Instrument Launcher containing the DMM software. Other pieces of software work however, the DMM stalls immediately after starting with a NI Instruments loading bar.

    I tried the repair option of software specifically for the NI ELVISmx driver and also tried wiping clean and reinstall fees. By receiving the same result.


  • What does error Code 0x80072efd HRESULT and how to fix it?

    What does error Code 0x80072efd HRESULT and how to fix it?

    If this error occurs during the update of Windows, see here: http://support.microsoft.com/kb/836941. (0X80072EFD - ERROR_INTERNET_CANNOT_CONNECT). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

  • When I start thesystem I get 2 errors in netdolst.dll and qWaves32.dll are missing

    When I start thesystem I get 2 errors in netdolst.dll and qWaves32.dll are missing, how and where can I download free others these files, the computer works fine except that when I start the system is very slow, and then displays error messages I tried the system restore, but this does not seem worked either I don't think restore points do not appear to contain everything that I never really use the restore of the system but like I said system works well except that I am living in a retirement home and cannot afford these packages fantasies you can send me an email to * address email is removed from the privacy * I'd highly appreciate your help as soon as possible because I am one of those who dislikes computers I would prefer to give me error messages can you send me instructions instead of put in place on the forum you can do it too if you want to thank you for your help, I am not an expert in computers, so I need a step by step instructions

    qWAVE.dll (without the "s32") is a legitimate file for Vista and Windows 7 but not XP.

    Searches on Google for "qwaves32.dll" and "netdolst.dll" increase only highly questionable links.

    When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.  Given that you know on torrents (and downloaded them?) increases the likelihood that you had (or still have) malicious software on your computer.

    First of all, download, install, update and run both of these free analysis tools:
    MalwareBytes AntiMalware
    SUPERAntiSpyware

    Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

    If the scans does not solve the problem (and they can't, because the actual malware dll file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

    Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

Maybe you are looking for