Error of customer Cisco VPN connection ASA 5505

Similar Questions

• Configuration of Cisco for Cisco VPN Client ASA 5505

  Our firm has finally made the move from Sonicwall Cisco for our SMB customers. Got our first customer with a VPN site-to site solid and you have configured the main router for connections via the Cisco VPN Client VPN Wizard.

  When I install the VPN Client on desktop computers that does not capture all the necessary options (unless you have a SSL VPN). I guess that there is a process that I am missing to export a connection profile that Cisco VPN Client users can import for their connection.

  There step by step guides to create the connection profile file to distribute to customers?

  Hello

  The ASDM wizard is for the configuration on the SAA. This wizard will help you complete the VPN configuration on the end of the ASA.

  You will need to set the same in the client, so that they can negotiate and connect.

  Input connection in the client field, that's what you want to be seen that on the VPN client - it can be any name

  Host will be the external ip address of the ASA.

  Group options:

  name - same tunnel as defined on the ASA group
  Password - pre-shared as on ASA.

  Confirm password - same pre-shared key.

  Once this is over, you will see the customer having an entry same as a login entry. You must click on connect there. He will be a guest user and the password. Please enter the login crendentials. VPN connects.

  You can distribute the .pcf file that is formed at the place mentioned in the post above. Once the other client receive the .pcf, they need to import it by clicking this tab on the VPN client.

  Kind regards

  Anisha

• Connection of customer Cisco VPN to work

  I recently picked up 1 billion domestic 7800N router to replace my old netgear which fell signal much.

  I seem to have some access to my work via VPN client network problem.  I can't connect the Cisco VPN client to the network ok but I have no access to the email server and exchange. I tested the parameters of the client on my old Netgear and it works fine. That tells me that the management of the router...

  I don't have any packet filtering on and I put in place profile of my fixed ip of internal House on the ip of the work to allow any protocol and any port.

  I also sent port 500, 4500 and internal 10000UDP to my ip address.

  I'm a noob when it comes to networking and I'm a little lost. I feel this topic falls in the middle ground between the client and the seup router if I appreciate draw my having a definitive answer. I can post a copy of the customer logs if this is useful.

  I hope someone can point me in the right direction...

  Thank you

  Neil

  Hello

  It looks like your home network is using the same ip as your work network range. I recommend you to choose a new range for your home network that is not identified in the routing table updates in your newspapers.

  For example: 10.255.255.0/24

  Best regards

  Ju

  Sent by Cisco Support technique iPad App

• Routing issue of Cisco VPN Client ASA

  Hi, I use a Barracuda NG for firewalls and I would use a Cisco ASA 5505 for VPN Client connections. But I have the problem that I can't get a connection to the VPN PC connected to the internal network. But I can reach the VPN connected PC from the inside. Here is a diagram of my network:

  cisco_asa_prob.jpg

  

  Here the IP Configuration and the routing of the Barracuda firewall table:

  screen_shot_2014-08 - 12_at_16.01.42.png

  

  I have a route on the Barracuda NG to the 10.10.10.0/24 network VPN Client on eth0.

  The 192.168.1.0/24 LAN I ping the Client comes with Client VPN 10.10.10.11 as it should. But I can't ping or access network resources in the local network for AnyConnected customer's PC that connected through the VPN.

  Here is the config Cisco ASA:

   : Saved : : Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz : ASA Version 9.2(2) ! hostname leela names ip local pool VPN-Pool 10.10.10.10-10.10.10.200 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 5 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Vlan5 nameif dmz security-level 50 ip address 172.16.0.250 255.255.255.0 ! ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server 192.168.1.10 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network VPN-Pool subnet 10.10.10.0 255.255.255.0 description VPN-Pool object network NETWORK_OBJ_10.10.10.0_24 subnet 10.10.10.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip object VPN-Pool any access-list dmz_access_in extended permit ip any any access-list global_access extended permit ip any any access-list outside_access_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (inside,dmz) source static any any destination static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 no-proxy-arp route-lookup inactive access-group inside_access_in in interface inside access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz access-group global_access global route dmz 0.0.0.0 0.0.0.0 172.16.0.254 1 route inside 0.0.0.0 0.0.0.0 192.168.1.254 tunneled timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy server-type microsoft user-identity default-domain LOCAL aaa authentication enable console LDAP_SRV_GRP LOCAL aaa authentication http console LDAP_SRV_GRP LOCAL aaa authentication ssh console LDAP_SRV_GRP LOCAL aaa authentication serial console LOCAL http server enable 444 http 192.168.1.0 255.255.255.0 inside snmp-server location Vienna crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map dmz_map interface dmz crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=leela proxy-ldc-issuer crl configure crypto ca trustpoint ASDM_TrustPoint1 enrollment terminal crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable dmz client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 no ssh stricthostkeycheck ssh 192.168.1.0 255.255.255.0 inside ssh timeout 30 ssh key-exchange group dh-group1-sha1 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.254-192.168.1.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept dynamic-filter updater-client enable dynamic-filter use-database ntp server 192.168.1.10 source inside ssl trust-point ASDM_TrustPoint0 dmz ssl trust-point ASDM_TrustPoint0 inside webvpn enable dmz no anyconnect-essentials anyconnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 1 anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 2 anyconnect image disk0:/anyconnect-linux-3.1.05170-k9.pkg 3 anyconnect image disk0:/anyconnect-linux-64-3.1.05170-k9.pkg 4 anyconnect profiles AnyConnect_client_profile disk0:/AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy DfltGrpPolicy attributes default-domain value group-policy GroupPolicy_AnyConnect internal group-policy GroupPolicy_AnyConnect attributes wins-server none dns-server value 192.168.1.10 vpn-tunnel-protocol ikev2 ssl-client webvpn anyconnect profiles value AnyConnect_client_profile type user group-policy portal internal group-policy portal attributes vpn-tunnel-protocol ssl-clientless webvpn url-list none username tunnel-group AnyConnect type remote-access tunnel-group AnyConnect general-attributes address-pool VPN-Pool authentication-server-group LDAP_SRV_GRP default-group-policy GroupPolicy_AnyConnect tunnel-group AnyConnect webvpn-attributes group-alias AnyConnect enable tunnel-group Portal type remote-access tunnel-group Portal general-attributes authentication-server-group LDAP_SRV_GRP default-group-policy portal tunnel-group Portal webvpn-attributes group-alias portal enable! ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 ! prompt hostname context no call-home reporting anonymous hpm topN enable : end no asdm history enable

  Can someone please help me solve this problem?

  When I tried to solve this I didn't choose which interface the Packet Tracer?

  The interface inside or DMZ interface?  Inside, he says it will not work with the dmz but the error did not help me

  Anyone here knows why it does not work?

  screen_shot_2014-08 - 12_at_16.34.57.png

  

  screen_shot_2014-08 - 12_at_16.33.06.png

  

  Hello

  Inside LAN is directly connected to the right firewall VPN... then I don't think you have to have the itinerary tunnele... can you try to remove the road tunnel mode and check.

  entrance to the road that is static to achieve 10.10.10.11 as its display is correct...

  Route by tunnel watch also with 255 administrative distance.  I've never used that in my scenarios... lets see...

  Concerning

  Knockaert

• Install two the separate IPSec VPNS on ASA 5505

  Hello

  I'll have set up a second tunnel IPSec VPN on my Cisco ASA 5505 to another office.  I was able to configure one without problem through the ASDM, but were not able to get the second.

  The IPSec tunnel connects to a WRVS4400N router to the other office.  I tried the debug crypto isakmp and ipsec crypto, but I get nothing.  Here is the config.  Something seems wrong on my end?   I've also attached a screenshot of the configuration settings on the remote router.

  Output of the command: "show run".

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname WayneASA

  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 70.91.18.205 255.255.255.252
  !
  interface Vlan5
  Shutdown
  No nameif
  security-level 50
  IP 192.168.10.1 255.255.255.0
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS lookup field inside
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  75.75.75.75 server name
  75.75.76.76 server name
  domain 3gtms.com
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  inside_access_in of access allowed any ip an extended list
  IPSec_Access to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  TunnelSplit1 list standard access allowed 192.168.10.0 255.255.255.224
  TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
  outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  outside_2_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0

  pager lines 24
  Enable logging
  Within 1500 MTU
  Outside 1500 MTU
  IP mask 255.255.255.224 local pool VPNPool 192.168.10.1 - 192.168.10.30
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0
  NAT (inside) 1 0.0.0.0 0.0.0.0

  inside_access_in access to the interface inside group
  Access-group out_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 70.91.18.206 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set esp-3des esp-md5-hmac VPNTransformSet
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto IPSec_map 1 corresponds to the address IPSec_Access
  card crypto IPSec_map 1 set peer 50.199.234.229
  card crypto IPSec_map 1 the transform-set VPNTransformSet value
  card crypto IPSec_map 2 corresponds to the address outside_2_cryptomap
  card crypto IPSec_map 2 set pfs Group1
  card crypto IPSec_map 2 set peer 98.101.139.210
  card crypto IPSec_map 2 the transform-set VPNTransformSet value
  card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  IPSec_map interface card crypto outside
  card crypto outside_map 1 match address outside_1_cryptomap
  peer set card crypto outside_map 1 50.199.234.229

  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 60
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.100 - 192.168.1.199 inside
  dhcpd dns 75.75.75.75 75.75.76.76 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal RemoteTunnel group strategy
  attributes of Group Policy RemoteTunnel
  value of server DNS 75.75.75.75 75.75.76.76
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RemoteTunnel_splitTunnelAcl_1
  3gtms.com value by default-field
  eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
  username password encrypted URsSXKLozQMSeCBk privilege 5 lestofts
  username lestofts attributes
  type of remote access service
  algobel lBWy5eNbHMCDPzuL encrypted password username
  username algobel attributes
  type of remote access service
  type tunnel-group RemoteTunnel remote access
  attributes global-tunnel-group RemoteTunnel
  address pool VPNPool
  Group Policy - by default-RemoteTunnel
  IPSec-attributes tunnel-group RemoteTunnel
  pre-shared key *.
  tunnel-group 50.199.234.229 type ipsec-l2l
  IPSec-attributes tunnel-group 50.199.234.229
  pre-shared key *.
  tunnel-group 98.101.139.210 type ipsec-l2l
  IPSec-attributes tunnel-group 98.101.139.210
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the icmp
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the dns
  inspect the pptp
  inspect the sip
  !
  global service-policy global_policy
  context of prompt hostname
  anonymous reporting remote call
  Cryptochecksum:a86adc4b23977672679b6fb72d0bc187
  : end

  You are also missing the NAT0 rule

  inside_nat0 to access extended list ip 192.168.2.0 allow 255.255.255.0 192.168.5.0 255.255.255.0

  -Jouni

• Problem with remote access VPN on ASA 5505

  I currently have a problem of an ASA 5505 configuration to connect via VPN remote access by using the Cisco VPN Client 5.0.07.0440 under Windows 8 Pro x 64. The VPN client will prompt you for the user name and password during the connection process, but fails soon after.

  The VPN client connects is as follows:

  ---------------------------------------------------------------------------------------------------------------------------------------

  Cisco Systems VPN Client Version 5.0.07.0440

  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.

  Customer type: Windows, Windows NT

  Running: 6.2.9200

  2 15:09:21.240 11/12/12 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  3 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  4 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "*." **. ***. *** »

  5 15:09:21.287 11/12/12 Sev = Info/6 IKE/0x6300003B

  Try to establish a connection with *. **. ***. ***.

  6 15:09:21.287 11/12/12 Sev = Info/4 IKE / 0 x 63000001

  From IKE Phase 1 negotiation

  7 15:09:21.303 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***

  8 15:09:21.365 11/12/12 Sev = Info/6 GUI/0x63B00012

  Attributes of the authentication request is 6: 00.

  9 15:09:21.334 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  10 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">

  11 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer is a compatible peer Cisco-Unity

  12 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer supports XAUTH

  13 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer supports the DPD

  14 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer supports NAT - T

  15 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer supports fragmentation IKE payloads

  16 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000001

  IOS Vendor ID successful construction

  17 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***

  18 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  19 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000083

  IKE port in use - Local Port = 0xFBCE, Remote Port = 0 x 1194

  20 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000072

  Automatic NAT detection status:

  Remote endpoint is NOT behind a NAT device

  This effect is behind a NAT device

  21 15:09:21.334 11/12/12 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  22 15:09:21.365 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  23 15:09:21.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  24 15:09:21.365 11/12/12 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  25 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700008

  IPSec driver started successfully

  26 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  27 15:09:27.319 11/12/12 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  28 15:09:27.319 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

  29 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  30 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  31 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

  32 15:09:27.365 11/12/12 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  33 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300005E

  Customer address a request from firewall to hub

  34 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

  35 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  36 15:09:27.397 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  37 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70

  38 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0

  39 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1

  40 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8

  41 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001

  42 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO

  43 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000

  44 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E

  MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (5) built by manufacturers on Saturday, May 20, 11 16:00

  45 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001

  46 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194

  47 15:09:27.397 11/12/12 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  48 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000056

  Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0

  49 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***

  50 15:09:27.444 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  51 15:09:27.444 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

  52 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000045

  Answering MACHINE-LIFE notify has value of 86400 seconds

  53 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000047

  This SA was already alive for 6 seconds, setting expiration 86394 seconds now

  54 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  55 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

  56 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO *(HASH, DEL) to *. **. ***. ***

  57 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000049

  IPsec security association negotiation made scrapped, MsgID = CE99A8A8

  58 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000017

  Marking of IKE SA delete (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED

  59 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  60 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000058

  Received an ISAKMP for a SA message no assets, I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924

  61 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">

  62 15:09:27.490 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  63 15:09:30.475 11/12/12 Sev = Info/4 IKE/0x6300004B

  IKE negotiation to throw HIS (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED

  64 15:09:30.475 11/12/12 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED".  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  65 15:09:30.475 11/12/12 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  66 15:09:30.475 11/12/12 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  67 15:09:30.475 11/12/12 Sev = Info/4 IKE / 0 x 63000001

  Signal received IKE to complete the VPN connection

  68 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  69 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  70 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  71 15:09:30.475 11/12/12 Sev = Info/4 IPSEC/0x6370000A

  IPSec driver successfully stopped

  ---------------------------------------------------------------------------------------------------------------------------------------

  The running configuration is the following (there is a VPN site-to-site set up as well at an another ASA 5505, but that works perfectly):

  : Saved

  :

  ASA Version 8.2 (5)

  !

  hostname NCHCO

  Select hTjwXz/V8EuTw9p9 of encrypted password

  hTjwXz/V8EuTw9p9 of encrypted passwd

  names of

  description of NCHCO name 192.168.2.0 City offices

  name 192.168.2.80 VPN_End

  name 192.168.2.70 VPN_Start

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.2.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address **. ***. 255.255.255.248

  !

  boot system Disk0: / asa825 - k8.bin

  passive FTP mode

  access extensive list ip NCHCO 255.255.255.0 outside_nat0_outbound allow 192.168.1.0 255.255.255.0

  access extensive list ip NCHCO 255.255.255.0 inside_nat0_outbound allow 192.168.1.0 255.255.255.0

  inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224

  access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap allow 192.168.1.0 255.255.255.0

  access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap_1 allow 192.168.1.0 255.255.255.0

  Standard access list LAN_Access allow NCHCO 255.255.255.0

  LAN_Access list standard access allowed 0.0.0.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 645.bin

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside) 0-list of access outside_nat0_outbound

  Route outside 0.0.0.0 0.0.0.0 74.219.208.49 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  network-acl outside_nat0_outbound

  WebVPN

  SVC request to enable default svc

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http *. **. ***. 255.255.255.255 outside

  http 74.218.158.238 255.255.255.255 outside

  http NCHCO 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set esp-3des esp-sha-hmac l2tp-transform

  Crypto ipsec transform-set l2tp-transformation mode transit

  Crypto ipsec transform-set vpn-transform esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  crypto dynamic-map dyn-map 10 set pfs Group1

  crypto dynamic-map dyn-map transform 10-set, vpn l2tp-transformation-transformation

  dynamic-map encryption dyn-map 10 value reverse-road

  Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5

  card crypto outside_map 1 match address outside_1_cryptomap

  card crypto outside_map 1 set pfs Group1

  peer set card crypto outside_map 1 74.219.208.50

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  inside crypto map inside_map interface

  card crypto vpn-map 1 match address outside_1_cryptomap_1

  card crypto vpn-card 1 set pfs Group1

  set vpn-card crypto map peer 1 74.219.208.50

  card crypto vpn-card 1 set of transformation-ESP-3DES-SHA

  dynamic vpn-map 10 dyn-map ipsec isakmp crypto map

  crypto isakmp identity address

  crypto ISAKMP allow inside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 15

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 35

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP ipsec-over-tcp port 10000

  enable client-implementation to date

  Telnet 192.168.1.0 255.255.255.0 inside

  Telnet NCHCO 255.255.255.0 inside

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH NCHCO 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.168.2.150 - 192.168.2.225 inside

  dhcpd dns 216.68.4.10 216.68.5.10 interface inside

  lease interface 64000 dhcpd inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of server DNS 192.168.2.1

  Protocol-tunnel-VPN IPSec l2tp ipsec

  nchco.local value by default-field

  attributes of Group Policy DfltGrpPolicy

  value of server DNS 192.168.2.1

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  allow password-storage

  enable IPSec-udp

  enable dhcp Intercept 255.255.255.0

  the address value VPN_Pool pools

  internal NCHVPN group policy

  NCHVPN group policy attributes

  value of 192.168.2.1 DNS Server 8.8.8.8

  Protocol-tunnel-VPN IPSec l2tp ipsec

  value by default-field NCHCO

  admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username

  username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg

  username, encrypted NCHvpn99 QhZZtJfwbnowceB7 password

  attributes global-tunnel-group DefaultRAGroup

  address (inside) VPN_Pool pool

  address pool VPN_Pool

  authentication-server-group (inside) LOCAL

  authentication-server-group (outside LOCAL)

  LOCAL authority-server-group

  authorization-server-group (inside) LOCAL

  authorization-server-group (outside LOCAL)

  Group Policy - by default-DefaultRAGroup

  band-Kingdom

  band-band

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared key *.

  NOCHECK Peer-id-validate

  tunnel-group DefaultRAGroup ppp-attributes

  No chap authentication

  no authentication ms-chap-v1

  ms-chap-v2 authentication

  tunnel-group DefaultWEBVPNGroup ppp-attributes

  PAP Authentication

  ms-chap-v2 authentication

  tunnel-group 74.219.208.50 type ipsec-l2l

  IPSec-attributes tunnel-group 74.219.208.50

  pre-shared key *.

  type tunnel-group NCHVPN remote access

  attributes global-tunnel-group NCHVPN

  address pool VPN_Pool

  Group Policy - by default-NCHVPN

  IPSec-attributes tunnel-group NCHVPN

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:15852745977ff159ba808c4a4feb61fa

  : end

  ASDM image disk0: / asdm - 645.bin

  ASDM VPN_Start 255.255.255.255 inside location

  ASDM VPN_End 255.255.255.255 inside location

  don't allow no asdm history

  Anyone have any idea why this is happening?

  Thank you!

  Add, crypto dynamic-map outside_dyn_map 20 value reverse-road.

  With respect,

  Safwan

• Customer behind EzVPN remotely (ASA 5505)

  Hello

  I try to set up a simple EzVPN infrastructure:

  EzVPN Server (CISCO2811, hostname cme) < --=""> EzVPN remotely (ASA5505, hostname ezvpn - asa) < --=""> Client

  Attached you will find the two server EzVPN configuration and remote control. The tunnel is getting up and if I ping from the ASA to the router, I see the packets be encrypted:

  ezvpn - asa # ping 172.16.100.1

  ...

  ezvpn - asa # crypto ipsec to show her

  Interface: outside

  Tag crypto map: _vpnc_cm, seq num: 10, local addr: 172.16.100.2

  _vpnc_acl the host 172.16.100.2 ip access list permit 172.16.100.1

  local ident (addr, mask, prot, port): (172.16.100.2/255.255.255.255/0/0)

  Remote ident (addr, mask, prot, port): (172.16.100.1/255.255.255.255/0/0)

  current_peer: 172.16.100.1, username: 172.16.100.1

  dynamic allocated peer ip: 0.0.0.0

  #pkts program: 5, #pkts encrypt: 5, #pkts digest: 5

  decaps #pkts: 5, #pkts decrypt: 5, #pkts check: 5

  compressed #pkts: 0, unzipped #pkts: 0

  #pkts uncompressed: 5, comp #pkts failed: 0, #pkts Dang failed: 0

  success #frag before: 0, failures before #frag: 0, #fragments created: 0

  Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0

  #send errors: 0, #recv errors: 0

  If I connect a customer with IP 192.168.1.2 interface eth0/1 and do a ping to the cme, I see not all packets are encrypted. I have no idea on the VPN, I just need a wireless lab environment. I need to configure on the SAA, so the Interior traffic is encrypted?

  Thanks in advance and best regards

  Dominic

  Hello

  Looks like you are missing split-tunnel list in 2811. Please see the link to the example configuration below.

  http://www.techsupportforum.com/forums/f137/how-to-configure-easy-VPN-server-on-Cisco-2811-router-192775.html

  HTH

  MS

• Impossible to establish a VPN to ASA 5505

  I'm trying to set up a network VPN from Site to Site. Right now I'm doing this work in the laboratory. I have the Internet port on the Linksys connected directly to port 0 on the cisco that has been set up as the internet port.

  My configuration is:

  Remote site

  Laptop 1 - IP 192.168.2.100 address 255.255.255.0 GW 192.168.2.1

  The Router 1 (Linksys BEFSX41) - LAN IP 192.168.2.1 255.255.255.0

  209.168.145.49 WAN IP address 255.255.255.0 GW 209.168.145.50

  Host site

  Laptop 2 - address 192.168.1.100 IP 255.255.255.0 GW 192.168.1.1

  Router 2 (Cisco ASA 5505) - LAN IP 0 address 192.168.1.1 255.255.255.0

  IP WAN (Port 0) 209.168.145.50 255.255.255.0

  My problems:

  I use ASDM 5.2 to configure the router of the SAA. With the configuration I currently have my linksys is not able to establish a VPN connection. The journal of ASA reported via the ASDM is as shown in the attachment ciscolog.txt.

  My linksys journal is as listed in the attachment linksyslog.txt.

  I also tried to create a Cisco VPN client connection using the cisco client software and a laptop connected directly to the internet port of the router cisco (port 0) and was not able to establish a connection with that either. I used the wizard of ASDM VPN to try to implement the Site-site as well as the scenarios of connection remotely. This has been unsuccessful in both cases.

  The only one, I am really interested in getting to work is the site to site.

  My current configuration of cisco is shown in the attachment cisco.txt.

  If anyone has any input I would appreciate it a lot. I have been through the manuals of cisco as to scouring the internet and am unable to find an answer.

  I enclose 3 files, cisco log (ciscolog.txt), linksys (linksyslog.txt) log and config cisco (cisco.txt) in the form of text files.

  Thank you.

  Sean

  I hope that path statement solves your problem.

  -Gilbert

  Good job, Adam!

• Is there really a customer Cisco VPN for Linux? _Really? _

  Hello people,

  I finally after almost a brain aneurysm trying to think too hard I have my Cisco 881 - SEC - K9 router configured properly for a multi-point my Amazon Virtual Private Cloud IPSec VPN tunnel, so that the obstacle is finally spent, and I think that it has been a very important step in my life somehow. I never thought I'd see the day, I actually got my hands on a legitimate Cisco non - stink... uh... I mean, non-linksys router. Now I can't find a "client" VPN for Linux program. I am running a Xen Hypervisor environment on openSUSE Linux because it is the only Linux distribution that fills all my laborious requirements in a Linux server environment. It is also the most mature and sure Linux on this planet, making it the most significant Linux distribution for my research needs.  Using NetworkManager is not really an option for a Linux based server environment and OpenVPN is just too complicated to understand for my little tiny head.  I've heard of some mysterious "easy VPN", but after that hours of digging online there is no information on this subject, even the Cisco download link leads to a Page not found error.  I see a Linux VPN API for the AnyConnect program, but is it a real VPN client, or just an API?  It seems to want my money to download it, but I have no money nor I really know what it is because it's all closed, the secret-like source and I can not even find a simple README file on him explaining what it is exactly.  I'm just a developer of off-work software attempts to connect to my home for personal use router and I can not really afford to more than $ 1 million for a single program I will only need to download once in my life that should have been included with the router in the first place of the fork. I have that more volunteer will probably not yet able to understand how to use the program when even because I don't know anything about VPN connections, that's why I bought this router so I can try to figure it all out as part of the open source nonprofit, research, I am currently conducting.  Is there some sort of period of evaluation or trial for personal use? Which would be really good if I could at least know if I will be able to understand or not.  I hate throwing money when it is in such a shortage these days. Is there really no alternative to a Cisco router.  It is an absolute necessity for the things I'm trying to accomplish, so try to settle for something else and past with my life isn't really an option. No, it's something that I just need to raise its head on and finish.

  I may be a little too crazy in me for my own good, but I don't see why it should take so much money just to learn to do something for personal use, it is not really a skill that I would never use otherwise.  Wouldn't be great if Cisco did their VPN client open-source and free for the public to use and modify, improve, learn and to grow and bring the whole world together in a community? Even the source code to the discontinuous old Cisco VPN client could be used as a tool for learning valuable for some poor student hungry or developer of Open Source software somewhere trying to cope with Sauce and Ramen noodles noodles Ramen on toast (don't tell me you've never thought about it).  With the ripple effect, it would significantly improve sales over time, because it would open the door to a whole new market where could those who previously could not afford to participate now. That's the real power of Open Source. It creates a more skilled workforce for the future by contributing openly and share knowledge. What happens if the next big internet technology and the solution to the global tyranny - the solution to end all wars forever - locked in the mind of a software developer to unemployment, which could not afford to upgrade their software to router from cisco or access the software they need because he was source closed and required engage in a costly to download service contract?  It would be just terrible, wouldn't it?  I guess there is no way to ever know for sure. I guess I'd be as happy if a kind soul out there could tell me an alternative easy to use for one always on the VPN connection that is running in the background that does not require NetworkManager or having to spend days days searching in and trying to figure out some really poor or extremely complex documents?  I apologize for all the sentences run on posed as a question, but just a few serious mental exhaustion of this, being unemployed is a few people from hard work. I really could use a vacation.  Maybe a camping on the coast trip is in order after I get this job, that sounds nice, isn't it? Nothing like a summer storm on the beach to the ocean--away from technology - to refresh the mind.

  I won't step in all the discussions in there, but you might want to look into is vpnc and openconnect.

  The two opensource projects that seem to work with devices Cisco, for a long time, I've been a user of vpnc.

  http://www.infradead.org/openconnect/

  http://www.UNIX-AG.uni-kl.de/~Massar/vpnc/

  Looks like some of your questions, concerns should be directed to your Cisco rep.

  There is an AC for Linux client (component the GUI and CLI). If you have problems finding - get it from 'package' (for linux) file, which is essentially a zip.

• Internet connections ASA 5505 - two

  Is Hi possible to configure an ASA 5505 with two internet connections? One dedicated to the VPN and the other for Internet access only.

  If you have an example to share.

  Thank you very much

  David

  I see that you have a static route to 186.125.164.178, if you only test card crypto 2, right?

  Your nat (inside) 0 uses ACL inside_nat0_outbound_1 which doesn't seem to have the exclusion for 10.5.3.0/24 remote network.

• Cisco VPN connection

  In my company network I use Cisco Any Connect VPN client software for remote users to access the resources of the company LAN, which is in place and work. 2951 router is the VPN gateway for remote users.

  I want to configure the VPN in such a way that when someone is connected with the network of the company LAN that this user has no access to the internet.

  Secondly if someone tell me any connection software Cisco VPN Client is capible of installation of Windows Server 2008 R2, if the answer is YES so kindly send me the link to download.

  Have a nice time.

  Kindly can you show me full-tunnel configurations

  Just remove all lines starting with "svc split" of the "policy group" that is embedded in the configuration of your "webvpn context." Then it will change the default value of "tunnel of all".

  Kindly send me the link to download this software.

  Windows is not my area of knowledge... Fortunately, my clients use Office-operating systems.

  Perhaps this component is already installed on this system from other software? Have you only tried installing AnyConnect?

• Cisco VPN client (ASA) password expiry messages

  Hi all

  I am looking for a way to change the message displayed on the Cisco VPN client, when a password change is required. This configuration uses an ASA 5520 with Windows 2003 IAS radius for authentication server.

  I have configured the option 'password-management' under the tunnel-group, but when the password expires the vpn client prompts you to "enter a new pin code.

  This customizable message, for example "Please enter a new password to 8 characters etc.

  The original message communicates enough information for the user.

  Thank you

  Hi Matt,

  This is a known defect CSCeh13180 (when using RADIUS with expiry) and there is currently no plan to fix this bug.

  But you can try this for one of your VPN client and see if that helps.

  you need to change the VPNClient.ini on the PC that installed the VPN Client. Here are the settings you will need...

  [RadiusSDI]

  NewPinSubStr = "" enter the new password: ""

  HTH

  Kind regards

  JK

• Help: Customer Cisco VPN &amp; Split Tunnel but not Internet

  Hi Forum.

  We are faced with this problem: after having successfully open a VPN connection with the Cisco VPN Client to a router Cisco, the rest of the world are not properly available more.

  This is what has been verified / so far attempted to identify the problem on a Windows Vista computer:

  -Router: Split Tunneling is allowed according to sysop

  -On the VPN-Client: "allow Local Lan access" is checked

  -On the Client (statistics): only STI VPN-rout configured listed unter "guarantee routes." "Local Lan routes" is empty.

  -Calling 'http://www.google.com' in IE fails

  -Call ' 74.125.232.116' (IE IP) IE works / ping the IP works.

  -nslookup properly lists the current DNS server

  -nslookup www.google.com resolves correctly the name of intellectual property

  It seems that it is not that the connection with the rest of the Internet is deleted, but DNS resolution fails somehow, even though all signs point to the appropriate DNS server is in force and although the command line can resolve the name.

  does anyone have a tip how to debug this correctly?

  No worries Pat...

  Sent by Cisco Support technique iPhone App

  -Please evaluate solutions

• Customer Cisco VPN through PIX

  I have a PIX 501. I would use the Cisco VPN Client through the PIX to connect to a PIX on another site. The client will connect, but there is no traffic through the connection. What can I do?

  On the remote PEER PIX, add the following line.

  ISAKMP nat-traversal 20

  sincerely

  Patrick

• Customer Cisco VPN not prompt to change the password when the Radius ID is due has expired.

  Hello, I would like to know what is behind a Cisco VPN client software to the user PC invites not to change the password when their password ID RADIUS is expiring/expired. I would also like to know what is the solution to work around him. Thanks in advance.

  Hello

  The "password management" command is configured?

  For the password function - expires to work in conjunction with the ray, that's all you need on the SAA.

  Let me know.

  Thank you.