Error of initialization of Simulation 54 to SIT

Hi all

I have been involved in the examples to SIT and have opened the example "lot simulation.vi. Then, I changed it to make it work the sinewave.mdl from the example of the sine wave. This was all good and well. Then, I decided that I wanted to run the sinewave.dll on my PXI-8101. At this point, when I click run, it gives me the error:

54 error to TCP connection open in NI_SIT_userAPI.lvlib: SIT initialize Simulation.vi.

I think I might have missed a step somewhere, but I don't know. I have opened the VI and click Run.

Thank you.

Hello

Is PXI that you deploy on a PXI real-time? It seems you are getting this error because you do not specify a driver VI for the dll model. You must create and specify a driver VI when deploying to an RT target. Take a look at this link, and it will help to explain in more detail.

David has.

Tags: NI Software

Similar Questions

  • [ERROR] Cordova initialization error: undefined

    Hello

    I've developed a web application using cordova 3.5.0 and it works very well in my Z10, however there is an error when starting the application that says

    [ERROR] Cordova initialization error: undefined

    After pressing OK app works very well. I can't use Web Inspector, because the error is thrown until it is available.

    That's what I use to get the operational application

    Cordova, run blackberry - liberation - devicepass 123456 - 123456 keystorepass

    I use 10.2.0.1155 - BlackBerry 10.2 native SDK under Windows 7

    Thank you!

    Error disappeared after migrating to webworks, as described in the http://stackoverflow.com/questions/24479526/error-initializing-cordova-undefined

  • I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

    I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

    uninstall all cc (if nothing is installed) by using the adobe uninstaller programs.

    clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

    Restart your computer, and then install, https://creative.adobe.com/products/creative-cloud

    Use the desktop application to install your programs of cc.

  • "The remote server returned an error: (502) Bad Gateway" while matching Protected Site VC and recovery Site VC in VMware SRM

    Hi all

    I am trying to Setup VMware SRM 4.1 groups. I had configured hitachi usp vm storage based array replication in both sites.

    Now when I try to pair the two sites vCenter, I get an error at the end of the phase of matching as message "the remote server returned an error: (502) Bad Gateway ' on the protected site. But surprisingly, I am able to match both the vCenters on the recovering site.

    Please help me to get the problem.

    Thanks in advance,

    Sanjeev

    Run telnet server vCenter/SRM protected site to the recovering site server vCenter/SRM:

    Telnet IP_ADDRESS 80

    Telnet IP_ADDRESS 443

    You succeed?

  • Error of initialization of Photoshop CS3

    Properly installed and active Photoshop CS3 on a new PC with a fresh install of Windows 7 Pro 64 bit and Photoshop CS3 10.0.1 & Bridge CS3 2.1.1.9 updates.  Bridge works well, but Photoshop returns the error message when you try to start the program, "could not initialize Photoshop because of a program error."  Tried to solve in the following steps:

    • Remove/reinstall CS3 in the directory root
    • Remove/reinstall CS3
    • Disable the TWAIN driver
    • Downloaded and installed latest NVidia video card drivers.

    Notice the following message in PSErrorLog.txt every time that Photoshop CS3 is launched, "2013:10:31 09:41:33:...-..» "\sources\OWLPanelManager.cpp: 1602: REQUIRING failed" downloaded and installed AdobeOwl.dll for this reason, but without success.

    ALM.log prinout indicates that several steps failed, but I don't know if there is a problem or how it could be solved:

    2013-10-31 09:08:41 [4064] ALM: _info_: =.

    2013-10-31 09:08:41 [4064] ALM: _info_: release start ALM 2.1 (build 2.1.2.1082)

    2013-10-31 09:08:41 [4064] ALM: _info_: TYPE = 1

    2013-10-31 09:08:41 [4064] ALM: _info_: GUID = license-GUID-Photoshop-CS3-Win

    2013-10-31 09:08:41 [4064] ALM: _info_: LANG = en_US

    2013-10-31 09:08:41 [4064] ALM: _info_: load AdobeConfig (version = 1.3)

    2013-10-31 09:08:41 [4064] ALM: _info_: use the serial number of PCD

    2013-10-31 09:08:42 [4064] ALM: _info_: license to find (type = 0x01, property = 0 x 00, State = 0x00)

    2013-10-31 09:08:42 [4064] ALM: _info_: Start Session license success!

    2013-10-31 09:08:42 [4064] ALM: _info_: Photoshop_Premium function query (version = 10.0) Failed (Status = - 5)

    2013-10-31 09:08:42 [4064] ALM: _info_: Photoshop_Standard request (version = 10.0) Succeed function

    2013-10-31 09:08:42 [4064] ALM: _info_: Bridge_Base request (version = 2.0) Succeed function

    2013-10-31 09:08:42 [4064] ALM: _info_: Bridge_CameraRaw request (version = 2.0) Succeed function

    2013-10-31 09:08:42 [4064] ALM: _info_: MobileCenter_Base request (version = 1.0) Succeed function

    2013-10-31 09:18:20 [3180] ALM: _info_: =.

    2013-10-31 09:18:20 [3180] ALM: _info_: release start ALM 2.1 (build 2.1.5.1504)

    2013-10-31 09:18:20 [3180] ALM: _info_: TYPE = 2

    2013-10-31 09:18:20 [3180] ALM: _info_: Start Session license success!

    2013-10-31 09:18:20 [3180] ALM: _info_: Bridge_Base request (version = 2.0) Succeed function

    2013-10-31 09:18:20 [3180] ALM: _info_: Bridge_Base request (version = 2.0) Succeed function

    2013-10-31 09:18:20 [3180] ALM: _info_: Bridge_ColorSettings function query (version = 2.0) Failed (Status = - 5)

    2013-10-31 09:18:20 [3180] ALM: _info_: Bridge_CameraRaw request (version = 2.0) Succeed function

    2013-10-31 09:18:20 [3180] ALM: _info_: Bridge_PhotoshopElements function query (version = 2.0) Failed (Status = - 5)

    2013-10-31 09:18:45 [3180] ALM: _info_:

    2013-10-31 09:18:45 [3180] ALM: _info_: end of Session of license!

    2013-10-31 09:18:45 [3180] ALM: _info_: end of ALM

    2013-10-31 09:18:45 [3180] ALM: _info_: =.

    Report of AMT.log is as follows:

    2013-10-31 09:41:20 [3264] AMT: START SESSION, library version 1.0.0.1082,46.278103

    2013-10-31 09:41:20 [3264] AMT: initialization C:\Program Files (x 86) \Adobe\Adobe Photoshop CS3\ [en_US]

    2013-10-31 09:41:20 [3264] AMT: Adobe License Manager version 2.1 RELEASE (build 2.1082)

    2013-10-31 09:41:20 [3264] /AMT0069688654/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}

    2013-10-31 09:41:20 [3264] /AMT0194694755/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}

    2013-10-31 09:41:20 [3264] /AMT0073107491/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}

    2013-10-31 09:41:20 [3264] /AMT0087759331/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}

    2013-10-31 09:41:20 [3264] /AMT0051932803/ license-GUID-Photoshop-CS3-Win

    2013-10-31 09:41:20 [3264] /AMT0186350190/

    2013-10-31 09:41:20 [3264] /AMT0013778542/

    2013-10-31 09:41:20 [3264] C:\Program Files (x 86) /AMT0141832179/ \Adobe\Adobe Photoshop CS3\AMT

    2013-10-31 09:41:20 [3264] C:\Program Files (x 86) /AMT0166617427/ \Adobe\Adobe Photoshop CS3\AMT\application.sif

    2013-10-31 09:41:20 [3264] /AMT0268432926/ 91198956814627932656

    2013-10-31 09:41:20 [3264] /AMT0172021198/

    2013-10-31 09:41:20 [3264] /AMT0201805758/

    2013-10-31 09:41:20 [3264] /AMT0013754766/

    2013-10-31 09:41:20 [3264] /AMT0088421566/

    2013-10-31 09:41:20 [3264] /AMT0171050355/

    2013-10-31 09:41:33 [3520] AMT: START SESSION, library version 1.0.0.1082,46.278103

    2013-10-31 09:41:33 [3520] AMT: initialization C:\Program Files (x 86) \Adobe\Adobe Photoshop CS3\ [en_US]

    2013-10-31 09:41:33 [3520] AMT: Adobe License Manager version 2.1 RELEASE (build 2.1082)

    2013-10-31 09:41:33 [3520] /AMT0069688654/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}

    2013-10-31 09:41:33 [3520] /AMT0194694755/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}

    2013-10-31 09:41:33 [3520] /AMT0073107491/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}

    2013-10-31 09:41:33 [3520] /AMT0087759331/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}

    2013-10-31 09:41:33 [3520] /AMT0051932803/ license-GUID-Photoshop-CS3-Win

    2013-10-31 09:41:33 [3520] /AMT0186350190/

    2013-10-31 09:41:33 [3520] /AMT0013778542/

    2013-10-31 09:41:33 [3520] C:\Program Files (x 86) /AMT0141832179/ \Adobe\Adobe Photoshop CS3\AMT

    2013-10-31 09:41:33 [3520] C:\Program Files (x 86) /AMT0166617427/ \Adobe\Adobe Photoshop CS3\AMT\application.sif

    2013-10-31 09:41:33 [3520] /AMT0268432926/ 91198956814627932656

    2013-10-31 09:41:33 [3520] /AMT0172021198/

    2013-10-31 09:41:33 [3520] /AMT0201805758/

    2013-10-31 09:41:33 [3520] /AMT0013754766/

    2013-10-31 09:41:33 [3520] /AMT0088421566/

    2013-10-31 09:41:33 [3520] /AMT0171050355/

    Any suggestions to solve this dilemma are appreciated.

    I managed to fix the error of initialization of Photoshop CS3 reinstall Windows 7 Pro 64 bit from scratch.  It took a lot of time, but it amounted to less effort I had to solve the problem.

  • Essbase start-up, the system of survey error "CSS initialization fails.

    Hello
    I have been using the hyperion essbase in the past.
    Today, somebody removed the network cable on the servers. I put back them, but since then I am facing problem where I can't connect to the Essbase server.
    I tried to restart the essbase server. When the server starts, it first gives the warning:
    log4j: WARN no appenders could be found for logger (com.hyperion.css.common.CSSLo
    landing market).
    log4j: WARN Please initialize log4j correctly system.

    But he continues, and then prompt error

    [Fri Mar 18 17:06:02 2011] Local/ESSBASE0 / / / Error (1051429)
    Check Existence of Essbase product fails against the server of Shared Services with Er
    MMR [unable to connect to Shared Services, make sure that the Server Shared Services]
    is running and try again.]

    Fatal error: CSS initialization fails

    I checked the service of Shared Services, and it works well. My environment is a distributed environment, where shared (foundation) services are installed on a different machine than the Essbase Server

    Someone could also the problem... Please help

    Are you really sure that you can connect to shared services, if the service is in place it does not always mean that hss is fully executed, for example, there could be a problem in communicating with the relational repository.
    You should also have a look at SharedServices_Security_Client.log

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Error 1074097808 (Initialize with Topology.vi niSwitch)

    In trying to "initialize" the PXI-2527 switch module using "niSwitch Initialize.vi", I get the following error

    "Error - 1074097808 occurred at niSwitch Initialize.vi.

    Reason: unable to load dynamic library.

    "Name of the library: niswitchDAQmx.dll.

    I can see the switch module and configure the channels in niMAX. I reinstalled the software 15.0 NOR-DAQmx, 4.8 OR-Switch and NI Switch Executive several times to see if all the missing drivers would be restored. Also, I searched the entire hard drive, the Web site or Google, search FTP sites available and the NOR install discs, and I have not found such a driver under the name of "niswitchDAQmx.dll". If it's the simple solution, could someone please point me to the site where I can download it. I am running Windows 7 on an embedded controller with LabView 2013 SMU-8135. The module includes a PXI-4065 DMM and 2527 OR-Switch with a TB-2627 (Terminal). I have attached a screenshot of the 'NI Max installed hardware", a screenshot of the error message, a screenshot of the code segment and a screenshot of the software installed (OR MAX). Also, I am able to communicate with the 2527 switch OR use NI MAX "Test Panel", but I'm not able to create a DAQmx task for the switch (ex: resistance Signal acquisition). Any suggestion would be great. Thanks in advance.

    micgraph,

    Long story short:

    You will need to reinstall the COMPLETE OR-SWITCH 15.1 (link) and make sure the following option is selected. Installation with the default options * SHOULD * install this component and solve your problem.

    Long story:

    In order to allow smaller installs components helped break the driver and activate the dynamic dll loading. This allows customers to install a smaller part of the driver. (Instead of install to all HW, you can install it with the type "SwitchCA1, 2, & 3" [install huge] or with the type 'SwitchCA4' [small Install].)

    It seems (glancing at your MAX configuration) that you have installed the version 15.1 of the Runtime 'SwitchCA4 '.

    When you have completed the installation of the full version of NOR-SWITCH 15.1.1, it should appear in MAX with additional options.

  • Changes in the driver vi using the Simulation Interface Toolkit (SIT) for PXI get do not appear.

    Hello

    I use Simulation Interface Toolkit to target a controller built in Simulink on a PXI target. I used the SIT connection manager to generate the driver screws I had to make some changes in the screw driver specifically Read.vi IO. I made the changes and the entire application runs without error. But the changes are not getting in the functioning of the application, essentially when I load the thing on PXI and run it, it contains exactly as it was before behaiving I made these changes. Some how the changes I make to the Read.vi of e/s are not begin day somewhere in the top vi driver.

    Could someone help me with this please.

    Eliane.

    Hi Justin_P,

    Thank you very much for the reply. Solved the problem. What you're saying, that's certainly true, but I do not use the project.

    The problem was that whenever it makes a change one driver that saw VI top-level driver must be opened and saved again. This opening and registration links the pilot with new changed correctly VI and then everything works fine.

    Thanks again.

    Eliane.

  • Error code: sec_error_bad_signature on Facebook and other sites (Yahoo Mail) trust.

    I get the error above for Firefox and certificate on Internet Explorer and Google Chrome error. The connection problem is to the same sites on all three browsers. I changed the site to the "trusted sites" on IE, but also uncheck the "check editor / certification of server" blocks. I learned to switch to Firefox would solve the problem because it is inherent to Windows 8.1/Internet Explorer 11. This only happens on my desktop, but not on my book in Google Chrome. Any ideas or solutions on any of the browsers?

    First thought is that you should ask this in the forum, not on the forum of the Thunderbird and Firefox. You can get more help as this forum deals with any software Thunderbird mail client.

    https://support.Mozilla.org/en-us/questions/Firefox

  • If please help me solve a 400 error message that I receive for a site I've visited several times and is accessible via the Safari browser.

    I am an owner fitbit and downloaded their app on my macbook pro several weeks ago. I have consulted this app to review the progress of fitbit several times a day since. Today, I can't do that. I can not even access the Fitbit site. I get an error 400 - your browser sent an invalid request.

    I cannot access any other internet content through firefox.

    I can access my account and the Fitbit site via Safari. I can also access the Fitbit site and my account via my iphone. The problem seems to be something specific between my firefox and Fitbit.

    Thanks for your help.

    It seems that sometimes, cookies and cache files can be damaged (they not be saved correctly). Why does that happen? I don't really know. I don't know there are several reasons for this. If we could, we could stop him from past ever. Because we cannot do this, we have just this way again.

  • "The certificate is not reliable because no sender string has been provided" error in all browsers for all Web sites.

    As it is said, Chrome, Firefox and Internet explore all give the error message certificate for each attempted site - including the Firefox Add-ons page. The specific error is the "no transmitter channel has given".

    (1) this problem is not on my computer - it's on my mom's computer in another city. Therefore, I can't try each possibility bit without fly there - I'm looking for things I can tell him to do it by phone. The problem started today. I already have him given the list of anti-malware programs to install and run from here:

    https://support.Mozilla.org/en-us/questions/982393

    Note that, of course, she will have to accept the substitution of security certificate to do these things - I hope that's not bad.

    (2) the problem began after that she tried to use Skype, it hung for a very long time and would never connect you. So she tried to reinstall - and she said she clicked through a number of screens agreement and believes she could have installed 3rd third party software malware. It of ridiculous, Skype now put malware onto the computers of people through these false 3rd party add-ons installation? I guess it's possible Skype has been suspended due to some other problem - but she was able to reinstall Skype and managed to do work (but now its internet certificates will not be).

    (3) it have BitDefender. I am aware that it is said here:

    https://support.Mozilla.org/en-us/KB/connection-untrusted-error-message

    that she must turn off SSL scanning. She turned it off, it has not solved the problem. She turned off and restarted, it does not solve the problem. She has had for the last 6 months and it has never caused a problem.

    (4) in addition, BitDefender has announced today that he stopped a malicious program called MySearchDial.exe to try something, it should not. We went through this removal guide:

    http://malwaretips.com/blogs/start-mysearchdial-removal/

    However, the MySearchDial software was never actually installed in the windows install list, and we found no addons/plugins in the browser list (notice that Firefox Add-ons are not accessible with a certificate error, it gives the error message but DO NOT give you the ability to add an exception so that you cannot access the Add-ons). The only thing we found was b MySearchDial was by default in IE search engine list, despite the fact that there is no add-on, and (b) MySearchDial.exe in the folder temp (now deleted). I see I got BitDefender scan the temp folder * before * I deleted MySearchDial.exe, and he said some threats not found. What? This is BitDefender that warned me of this in the first place!

    Date and time 5) are correct.

    (6) checked the Windows 7 install, only Skype, Skype Click-to-Call, and (for some reason any) Microsoft Visual Studio 2010, and Visual C++ have been installed or modified today. I'm paranoid about Click-to-call and requested to uninstall, but it does not solve the problem.

    (7) the operating system is Win7 home 64 bit.

    Something beyond the malware removal without end of the programmes (via the above linked list) that we should try?

    OK - Malwarebytes fixed it. It turns out VisualBee browser backup were also there and Malwarebytes found and deleted.

    After this happened, the errors of certificate went, but she doesn't still could not connect because the computer was then manually set a proxy server, but it was easy to fix by returning to the automatic detection of settings.

    Thank you all for your suggestions.

  • Why do I have a 'General' error when trying to connect to a site on my laptop, but my office works fine?

    After an update from Microsoft, I tried to connect to a gambling site, but all I get is a "General error". He told me to refresh the page and try again. When I go to my office, I have a problem to connect. Why? Desktop is running xp, computer laptop windows 7.

    You can try the following steps in case of problems with web pages:

    Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • The internal organisation of DIAdem data returned an error of initialization

    Hello.

    I have a laptop that is running Windows XP with installed 10.2 DIAdem.

    Main problem: tiara does not start. A few seconds after trying to run it I get a message "ERROR" box saying

    "The internal organization of DIAdem data returned an initialization error."

    Question that might be related: when I connect to the laptop there is an error message saying:

    "The DataFinder cannot start to an internal error. (122): failed to open the configuration file! C:\Documents and Settings\Settings\Application Data\...\my.datafinder< runmode:="" datafinder="" desktop="">

    The directory C:\Documents and Settings\\Local Settings does not exist on the laptop.

    My first thought was to reinstall just DIAdem. However, when I open Add/Remove Programs tiara is not in the list, so I can't uninstall it. When I just try to run the installer it says I need to uninstall the existing version first.

    No idea how I could get DIAdem working again?

    (btw this laptop is used for courses etc in our society, so I do not know how this problem occurred. Just that they have not been able to run the tiara on her for more than a year)

    Hi such,

    in your 1st post you mentioned that you couldn't find tiara in the Add/Remove Programs list.

    => Please look into this list to or . That's because NEITHER has its own entry in the Add/Remove Programs list. Here you should find DIAdem to uninstall.

    You should use MSIBlast if the 'normal' Uninstall failed for some reason. If you use MSIBlast, he could not guarantee that everything is uninstalled in the right order. MSIBlast is not updated on the dependencies between the msi files.

    You told us that the directory C:\Documents and Settings\\Local Settings exist on your laptop. If you have a proper installation of XP, it must be there. It is sometimes invisible because of your windows settings. If this is the case please change your windows settings so that you can see the folders system as well.

    If you found this file, please remove the following folder: "c:\Documents and Settings\Settings\Application Data\National Instruments\Shared\DataFinder". After that start please DIAdem - a new folder with sub folders 'config' and 'data' are created.

    If the error is-, then I have only one idea: If your laptop doesn't have hard enough to free up space to manage all temporary files that occurs during an installation - so maybe it's that this message occurs if you start the installed application. The installer itself is not warn about in each case, overloaded virtual machine, e. g. fragmented hard drive, etc.).

    Hope that some of my points would help you,

    Kind regards

    dietfons

  • Error in setting of simulation in the ODE VI

    Hello

    I use the Gmath library OR where I am going have a "error-2341: Simulation settings: Simulation time ' in the VI.vi ODE. The VI works fine on MAC OS X on Macbook Pro, however giving the error above on the Macbook Air. The operating system both systems is the same, i.e. OS X EL Capitan 10.11.3.

    I am also having the same error when I run the VI on Windows 7 installed as a dual operating system on MACbook Pro.

    Are there any planned hardware problem? Because same code works on the Macbook Pro MAC OS (not on windows 7), but not on Macbook Air.

    Any help is appreciated.

    Concerning

    Hasan

    HB,

    I think that the cluster command may be part of the problem.  The full error message states: "the initial time of the simulation cannot be greater or equal to the last time." The values in the cluster of Simulations settings on the front panel do not violate this condition.

    However, I have created an indicator by popping up on the simulation of the ODE Solver.vi connector pane settings input terminal. When I wire to show that sees the Solver VI, I get last time< initial="">

    Try to replace your control of parameters of Simulation with a created from the entrance of the ODE Solver.

    Lynn

  • Protection error 153 downloading games on a Web site.

    Why do I get "Protection error 153" when downloading of games?  For the freeridegames.com site, I have in the past been able to download and play games.  Noiw all of a sudden I get this error 153 of Microsoft... Please tell me why and how to fix it!  Thank you

    Hi TeeCrona

    1. is the error message specific to the Web site of the game?

    2. for how long have you been faced with this problem?

    Please refer to the below supported provided links and check if the information provided will help you solve the problem.

    http://support.freeridegames.com/search.php?q=error+153

    You can even contact the game support for more assistance and control-

    http://support.freeridegames.com/

    I hope this helps.

Maybe you are looking for