Error of the eclipse 'Configure build path.

Similar Questions

• Error installing the Eclipse plugin

  Hi, I am installing the Eclipse plugin for VMware Studio. First of all, I downloaded Eclipse 3.5 and when that does not work I downloaded 3.4, but I'm having the same problem with 3.4 I had with 3.5. I'm just following the instructions posted here:

  http://www.VMware.com/support/Developer/Studio/studio20/eclipse_plugin.html

  I managed to step 3, when I click on install in step 4, I get a warning:

  «Maybe the software you selected is not valid with your current installation.» You want to open the wizard in any case to review the selections? »

  I click Yes and a new window opens that says "cannot complete the request. See details»

  Details:

  Cannot complete the request.  See the details.

  Unsatisfied dependency: http://com.vmware.studio.eclipse.feature.group 2.0.0.1017 - 185256 requiredCapability: org.eclipse.equinox.p2.iu/org.eclipse.wst.xml_ui.feature.feature.group/0.0.0

  Unsatisfied dependency: http://com.vmware.studio.eclipse.feature.group 2.0.0.1017 - 185256 requiredCapability: org.eclipse.equinox.p2.iu/org.eclipse.wst.xml_ui.feature.feature.group/0.0.0

  No one knows what that is this dependence and how can I solve this problem?

  Thank you!!

  Make sure that the proxy server can be reached.

  After installation, restart your eclipse.

  I recommend try first on Eclipse 3.4

• Error in the SMTP Configurations for File Server Resource Manager

  Hello

  Please help me how to configure SMTP for file server resource manager, when I have set up SMTP for gmail and godady e-mail I got the error.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Internet subnet mask is invalid - RVS4000 - error on the wan configuration

  Hi, I am trying to configure my RVS4000 to have access to the internet and get this error.

  I have my DSL ISP (585v7 - latest firmware bethere.co.uk) modem set to bridge mode and the internet connection is up (under the lights).

  I then plugged my RVS4000 him and through the browser interface management I try to configure my static IP using my allocated (and proven - I use them now on a router netgear & modem) Details.

  I'm going to 'wan configuration' and choose 'Type of 'static IP' Internet connection' and then enter my known IP, subnet mask, gateway by default and DNS details and as soon as I select 'save' I get the error "Internet subnet is invalid. (Please enter again". To avoid a problem with browser field validation, I tried this in IE and Safari.

  Can someone point me in the right direction please? It seems such a simple thing but I can't make it work / accept the correct values.

  Thank you!

  

  Post edited by: stu_malt1

  Well, I finally got your TIFF files, and noticed something really weird...

  You have your subnet mask shown in the screenshot for the RVS4000 as 225.225.240.0.

  This is an incorrect subnet mask. Did you mean to put something in the direction of 255.255.240.0?

• Impossible to update error TV Guide "download error. The new configuration of the TV could not be downloaded. We use existing data, if any, to continue until TV signal configuration"

  I had a successful using DNS 65.55.5.170 update!  The only comment I would add to previous posts, it is that I did a full installation of WMC, which included research new stations.  Seems like a good idea, but the code suggested by jasonl seems to work, at least for an update!  Billrobpv.

  Wednesday, September 24, 2014 00:09:07 + 0000, wifiwanderer wrote:
   
  > BTW, I started with Microsoft's Support, which has proved to be a total waste of time
   
  you have a support case number?
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Cannot acquire image with NI1744 using the interface configuration of Vision Builder AI 2011: error-1073774588

  I use a 1744 OR with NI Vision Builder AI 2011. When I'm in the interface of the inspection, the camera will acquire and display an image. When I go to the configuration interface and try to put in place the stage of image acquisition, I have error-1073774588: the undefined error. I sometimes also 1074396159 error: not enough memory.

  Thank you for your repply Burrito.

  The problem was sloved and two errors went away after I formatted the camera and reinstalled the software on the camera.

• The Eclipse SDK for Oracle Utilities SDK 2.2 configuration error

  Hello.
  
  I want to install a workstation development corporate tax management. I followed the installation guide for up and down.
  
  The application server is ok, the SDK seems to be OK.
  I ran "configureEclipse.exe" and makes manual configurations - as the install guide - readings. The eclipse project has been created, but it has 2 missing libraries.
  When I opened eclipse, it shows the following errors:
  
  Project EclipseProject220 is missing required library: "lib/ojdbc5-11.1.0.6.0.jar."
  Project EclipseProject220 is missing required library: "lib/spl-ccb-2.2.0.jar."
  
  My question is ¿where can I get these jar files?
  
  
  ------------------------------
  On the environment:
  The development workstation is a notebook under Windows 2003 server, with ETM v2.2.0 installed application server. 3rd party SW is installed ok (intended versions). Web server is Apache Tomcat v6.0.13. Eclipse v3.2.2. Oracle Utilities SDK v2.2.0.5 installed.
  
  Database is installed on another computer running Windows XP with the Oracle 11i database, connected on a local area network.
  -------------------------------
  
  Thanks in advance.

  I had these problems too...

  I suppouse you're TAX installind (ETM) then the library you need is lib/spl-tax-2.2.0.jar'

  On the other hand, the eclipse of "lib/ojdbc5-11.1.0.6.0.jar" othe application. I changed it to "lib/ojdbc5-11.1.0.7.0.jar".

  After change of these libs I can run the generator and deploy scripts even when I don't know jet how to develop.

  Dou you have a few cookbooks for development (algorithnms, modify native clases, ect) you want to share?

  Thank you very much.

• Problems of libraries Java build path. With the help of an external CONTAINER as a library in a BlackBerry app.

  Hello

  I have two codes, the application code and the code of the library.

  The application should use the jar as a library file.

  Application-> App

  Library-> AppLib

  I work with Eclipse and JRE 5.0. I have a problem. I'm trying the AppLib.ja the Java Build Path of the application code, as in a normal Java application. Copy "AppLib.jar" in my project and select Java Build Path libraries does not work. Browser files doen't show me the new file. Therefore, I can select the library project folder as external JAR, but when I test the app on BlackBerry I get an error do not find the module:

  > App starting error: Module 'AppLib' not found

  To export my application for BlackBerry I only select the file "App.alx" with the Desktop Manager. I should also add, somehow, the Jar file?

  What I am doing wrong?

  I think if I could include 'AppLib.jar' because no JAR external to compile the project would be expected for that library properly in the "App.alx" but as I have said, for example, if I put the "AppLib.jar" in the folder "App\ lib\" file path browser version does not show me the file and I can't select it. I can only do so if I select in the AppLib\deliverables\Standard\5.0.0\, but not found problem occurs then.

  Can someone help me?

  I won't put my library code in the application code. It is not very comfortable. And it would be a bit dodgy.

  Thank you very much.

  Greetings.

  ibarrera, that is not the problem.

  First, when copying a file to your project via the OS Explorer, you must refresh the project in Eclipse in order to get visible. otherwise, if the Eclipse do not see, the .jar file is not going to join your project. But I know that's not the problem.

  In the second place, to get this .jar file be included in your project as non-external, you must add as first external, close this wizard properties re-open; Then select the .jar file, you just added and click on "Migrate JAR file" button. Find the .jar file in the project and click Finish.

  This is done, your project will be ready to be built and executed.

  I hope this helps. Good luck to all.

• Eclipse - but will not compile errors in the code

  I just downloaded the eclipse + Installer Plugin of BB and I'm running the demos.

  Unfortunately, I am not able to compile the demos or simple Hello World application. In the project, I chose 'Configuration Build of current Blackberry' and in the Console it says nothing. No jad or cod file is generated. No errors. There is no difference whether I clean or not.

  Y at - there a step I'm missing? Any help would be great. I can't wait to start to develop as soon as possible!

  Thank you.

  Check if there is a tick for «activity for blackberry»

  in eclips explor right click on the project package. Select «activity for blackberry»

  If it isn't check eclips will not colmpile the project

• start failing after installing Windows XP firefox 12.0: error message: "the configuration is incorrect."

  After clicking on the icon of Firefox, I get the error message "this application has failed to start because the application configuration is incorrect".

  I uninstalled Firefox and deleted all the Mozilla files in my user account in the Documents and Settings folder. I installed the latest version of Java. Then I installed Firefox 12.0.

  I had this same problem when I updated my Firefox 11 to a later version of Firefox 11. I hadn't saved the old version of Firefox 11, and I couldn't find on the web, so I went back to Firefox 3.6. I am currently in Firefox 3.6.28.

  I'd like suggestions on how I could get over this stumbling block.

  Details of the configuration of my system:

  Version Java 6 32

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  System Type X 86-based PC

  Processor x 86 Family 6 Model 15 Stepping 6 GenuineIntel ~ 1867 Mhz

  Total physical memory 048,00 MB 2

  1.38 GB available physical memory

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Page file space 3.84 GB

  You can try to uninstall all entries of "Microsoft Visual C++" from the windows control panel and see if the error message disappears.

  (where another program on your pc depends on execution, it will display a dialog box when you start this program and offers you to reinstall once again)

• Myrio NOR in the Eclipse IDE: could not load library error NiFPGA

  Hello! I just started working with the myRIO NOR model 1900, using the Eclipse IDE. I tried build and run some of myRIO NI C examples by following the procedure described in the document 'C_support_for_myRIO_User_Guide' given by NEITHER. It builds without any errors but get this error when I try to run all programs:

  "ERROR:-63194"
  Failed to load NiFpga library! »

  It would really help if someone could suggest a solution for this problem. Thank you

  Hi ANJ123,

  Try to go through the following links.

  http://www.fixerrorhelps.com/fix-PC-error/how-to-fix-NiFpga.dll-error.html

  http://www.dllplus.com/fix-file-error/NiFpga.dll.html

  https://decibel.NI.com/content/docs/doc-31772

  See you soon,.

  ROLLAND

• Error 1314. The %appdata%\Autocad\ specified path is not unavailable

  Hi name is Kenya Caldwell and I am trying to install a program called Autocad, but whenever I do, I get the message following error 1314. The %appdata%\Autocad specified path is not unavailable.  I received a response from Autocad, but I do not understand, or not if it is correct.  Could someone help me with this problem?  Below is the message of Autocad.

  By specifying an installation location using a Windows environment variable

  Question

  When you have created a deployment or performing a stand-alone installation, you tried to specify the installation location using an environment variable, such as %ProgramFiles%, but you receive one of the following error messages:

  Please provide the path name where the customers go to install AutoCAD 2007 on their local computers.

  Error 1314. The path '% PROGRAMFILES%\..' is not available.

  Solution

  It is not possible to specify a variable of environment such as installation or the installation of customer location in a stand-alone installation or network deployment. If you install to different locations on different machines, it is strongly recommended that you use the deployment wizard to create several configurations of deployment for each location.

  To use a variable of environment as the installation location, you must run the installation of the product from the command line. This can be done by entering the following in the command line Windows or via a batch/script file.

  Note: This installation method is not tested or supported by Autodesk.

  Stand-alone installation

  MsiExec.exe /i "\Bin\AcadFEUI\acad.msi ' INSTALLDIR=%PROGRAMFILES%\

  Note: Replace the drive letter containing product for disk. Replace the rest of your installation for location. It is strongly recommended to use paths without spaces for this type of installation.

  Kenya Caldwell

  Salute to the Kenya,

  Try the steps mentioned by me in my first post and verify if the problem persists.
  See cannot install AutoCAD

  Visit our Microsoft answers feedback Forum and let us know what you think.

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Can not build waterfalls sample application: can not find the qmake configuration file

  When you try to build a sample application stunts for debugging on the PlayBook, I have some errors in the output.

  I am running Windows 7 (64 bit) using the QNX Momentics IDE.

  Here is the result:

  ----------------------------------------------------------------

  Build the unit for project HelloCascades debug configuration *.

  make the device debugging
  C:/SDK/BB10/host/win32/x86\usr\bin\qmake-spec unsupported\blackberry armv7le-g ++ o arm\Makefile device += HelloCascades.pro CONFIG
  WARNING: Did not find:... / SRC/.h
  WARNING: Did not find:... / SRC/.h
  X-unsupported\blackberry-C:/SDK/BB10/host/win32/x86\usr\bin\qmake-spec 86-g ++ o x86\Makefile simulator += HelloCascades.pro CONFIG
  WARNING: Did not find:... / SRC/.h
  WARNING: Did not find:... / SRC/.h
  make - C. / translations f Makefile update release
  make [1]: Entering directory "C: / SDK/BB10/Apps/translations
  C:/SDK/BB10/host/win32 / x 86/usr/bin/lupdate HelloCascades.pro
  Update 'HelloCascades_en_GB.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_fr.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_it.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_de.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_es.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  C:/SDK/BB10/host/win32 / x 86/usr/bin/lrelease HelloCascades.pro
  Not found in directory name racineLe qmake configuration is not valid.
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_en_GB.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_fr.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_it.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_de.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_es.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  make [1]: leaving directory ' C: / SDK/BB10/Apps/translations.
  make - c / arm f Makefile debugging
  make [1]: Entering directory "" C: / SDK/BB10/Apps/arm ' "
  do f Makefile.Debug
  make [2]: Entering directory "" C: / SDK/BB10/Apps/arm ' "
  Not find qmake configuration not found directoryCould extended fichierExemple of use OS qmake configuration before you define MAKEFILE_GENERATOR/usr/bin/sh: C:/Users/ROSSL~1/AppData/Local/Temp/make4028-1.sh: no such file or directory
  make [2]: * [o.le - v7-g/HelloCascades] error 127
  make [2]: leaving directory ' C: / SDK/BB10/Apps/arm.
  make [1]: * [debug] error 2
  make [1]: leaving directory ' C: / SDK/BB10/Apps/arm.
  make: * [Device-Debug] error 2

  Build completed *.

  I have bolded the output where I think the problem might be involved.  Is there a problem with the Makefile, or is it a directory I'm missing, or anything else?  I can't see why there is an error while compling.

  Thanks for any help.

  I have the same warnings qmake... is not found . But finally, after that I could successfully implement the objective of the Simulator, the sample application running, even with this qmake warnings.

• Error of the ripple: Oh Snap! Build request failed with the message: CreateProcessW

  Hello

  I installed the Mobile Emulator 0.9.1 ripple with SDK for Tablet 2.2.0.5 WebWorks, following the instructions exacly on a Windows 7 64-bit machine.

  If I try to package virtually any application (HelloWorld, weather, examples, something more complex, whatever), I get the following error:

  Oh Snap! Build request failed with message: CreateProcessW: The system cannot find the file specified.
  

  I tried a lot of things. I'm guessing that it's a mistake with the SDK, since I can enter any path to any folder that exists on my HD as the path to the SDK and I get the same error.

  Path SDK: SDK for Tablet 2.2.0.5 WebWorks c:\RIM\BlackBerry

  The project root: c:\Users\Username\RippleSites\AppName

  Archive name: AppName

  Output folder: c:\

  I tried different paths for the foregoing, moving my code and by reinstalling the SDK.

  I'm at my wits end - about to renounce WebWorks.  Any ideas? 

  

  It seems %SystemRoot%/system32 and any % were missing from my path variable. All good - too bad!

  Land