Error on blue screen and SP3.

Similar Questions

• the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

  Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• Error on blue screen and missing or invalid or component file causing Windows crash.

  Original title: missing or invalid files or components.

  Missing or not valid file or item causing windows/internet to freeze and crash. A BSOD (blue screen) shows a second and the computer restarts back on the desktop with no other problems. This happens only when I open/close a video too fast or I use some (L100 - 30 Hercules) aircraft in FS9. All other devices work fine. I sent an error report to Microsoft tonight when this happened. It conrcerned 2 files in C:\ Docs & Setting\All Users\Application data\Microsoft\Search\Data\Applications\Projects\System Index\System... (couldn't do the rest, but we had to do with the XML extension..) I am using Windows XP Pro with Service pack 3 and all updates.

  Is there a simple solution for this? I don't want to reinstall XP if I don't have, as my drive my being corrupt. I'm not sure. I also used some older programs that I have used for years that run fine on XP but will not work in Windows 7 even with Virtual XP Mode installed.

  Hello Joel S

  I had already tried this and it was not a hardware failure. I ran chkdsk and the player revealed a good with no bad sectors. I also use Belarc COMPUTER management systems that manages the health of smart HDs (HDs most have this 'Intelligent' ability). The problem was some legacy software that I thought that I had taken when I did a removal of the program. He left 5 pieces of something that is called «online...» "I found it using Malwarebytes, and he was buried deep in the registry. The program was "Cliffs of Dover" a stream online to run the program. Once you have downloaded the game was the only way to use it online, which took 20-30 minutes to load and once loaded would break your system if you have tried to play. Shame, it's a beautiful CFS, but way to buggy.

  In any case, removed from the basket with Malwarebytes and every thing works fine. No more accidents.

  Derek

• Error 0x0000000a blue screen and PC turns off

  original title: I get a blue screen crash then the computer shuts down

  could someone tell me how to solve this problem, my machine breaks down.

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: a

  BCP1: 0000006C

  BCP2: 0000001 B

  BCP3: 00000001

  BCP4: 81EC17F2

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini080310-02.dmp

  C:\Users\john\AppData\Local\Temp\WER-98875-0.SysData.XML

  C:\Users\john\AppData\Local\Temp\WERE2F8.tmp.version.txt

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error on blue screen ATI2DVAG infinite loop and am looking for a suggested solution for XP.

  get an error on blue screen ATI2DVAG infinite loop and I am looking for a suggested solution for XP.

  Hello jvecc,.

  Thank you for visiting the Microsoft answers community.

  This problem is caused by a defective unit or a device driver. Visit the website of the manufacturer of your computer or see if AMd drivers directly will work for your hardware configuration and then uninstall and reinstall your drivers.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen and CORE-DATA-INPAGE-ERROR Message

  The blue screen and the CORE-DATA-INPAGE-ERROR Message appeared during extract some files, 2 consecuentlly. It has happened too, but not that often and during other processes. What should I do? The OS is Vista Home Premium.

  Indeed, I am here!

  Thank you for fixing links.

  The attached file of the DMP is to bug checking KMODE_EXCEPTION_NOT_HANDLED (1e) .

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  8th error checking, {c0000005, 9eaa4efc, e551bae0, 0}

  0: kd > 9eaa4efc ln
  (9eaa4eb2) win32k! PFEOBJ::vFreepfdg + 0x4a |  (9eaa4f65) win32k! MultiUserGreTrackRemoveEngResource

  The exception is produced in win32k! PFEOBJ::vFreepfdg + 0x4a.

  0: kd > k
  ChildEBP RetAddr
  e551b6a0 84071908 nt! KeBugCheckEx + 0x1e
  e551ba70 8409584 has nt! KiDispatchException + 0x1a9
  e551bad8 840957fe nt! CommonDispatchException + 0x4a
  e551bafc 8401e70c nt! KiExceptionExit + 0 x 186
  e551bb64 9eb38a95 hal! KfLowerIrql + 0 x 64
  e551bb84 9eafac21 win32k! RFONTOBJ::vDeleteRFONT + 0 x 130
  e551bbbc 9eafada2 win32k! vRestartKillRFONTList + 0x7b
  e551bbf0 9eaafcd7 win32k! PFTOBJ::bUnloadWorkhorse + 0 x 115
  e551bc1c 9eaaf8d9 win32k! vCleanupPrivateFonts + 0x4d
  e551bc34 9eaac06e win32k! NtGdiCloseProcess + 0x16c
  e551bc54 9eaabbad win32k! GdiProcessCallout + 0 x 145
  e551bc70 84262 has 48 win32k! W32pProcessCallout + 0x5d
  e551bcdc 8423f47f nt! PspExitThread + 0x4a0
  e551bcf4 840fde8e nt! PsExitSpecialApc + 0 x 22
  e551bd4c 84094d 42 nt! KiDeliverApc + 0x1dc
  e551bd4c 77a95d14 nt! KiServiceExit + 0 x 56
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  04adf6dc 0x77a95d14 00000000

  Associated police crashes, likely a buffer overrun.

  ---------------------------------------------

  1. remove the font cache and then restart > C:\Windows\System32\FNTCACHE. DAT

  * I recommend that you create a system restore point before that just to be sure: Vista - START | type rstrui - create a restore point.

  2 you have avast! + Security installed Aladdin, is at the origin of the conflict.

  Remove and replace avast! and Aladdin with temporary Microsoft Security Essentials for troubleshooting purposes:

  avast! removal - http://www.avast.com/uninstall-utility

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Smart Defrag as soon as possible.

  4 uninstall RealNetworks as soon as POSSIBLE, the drivers are too old - 2003.

  Kind regards

  Patrick

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Portege Z30-A-1E1 - blue screen and reboot

  Hello

  I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.

  I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
  In the event log windows that I can't find anything that clearly led to a cause.

  I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.

  Anyone had a problem like this?
  Any suggestions for debugging?

  Thank you very much!

  Hello

  I don't have a complete solution, but perhaps a step on the way.
  I would say first to disable the auto restart when a blue screen appears.
  This way the error message will remain on the screen until the PC is turned off.

  Know how prevents automatic restarts here:
  http://www.troubleshootwindows.com/w...-8-7-Vista-XP/

  Tom BR

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• Error IRQL_NOT_LESS_OR_EQUAL blue screen

  Hello

  I just bought HP Pavlion dm4 1209tx and I get an Error IRQL_NOT_LESS_OR_EQUAL blue screen. It occurs usually when I play music or watch videos. Initially the system will just hang, then the blue screen appears. I'm just a beginner so any help will be greatly appreciated.

  Thank you!

  I was able to update the driver, thanks to you!

  So far, the system is not suspended yt or givng me a blue screen. I really hope that I won't get any more problem.

  Once again, thank you!

• 11.0 Adobe goes to blue screen and is now a flicker of the screen

  When I run adobe 11.0 that is loaded on the terminal, that he goes to the blue screen and now my screen flashes.   What should I do?

  Hi Bob,

  Thanks for posting in the Microsoft Community Forums.

  It would be more useful, me if you answer these questions.

  1 Windows operating system you are using?

  2. are you blue screen only with the Adobe program?

  I want the season to follow the article provided to solve the problem.

  Resolve system errors, freezes | Windows | Adobe software

  http://helpx.Adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-Windows.html

• my computer turns off, no code error, no blue screen

  my computer restarts auto no code error, no blue screen, it might be the drivers that I have installed or?  What can I do to solve this problem or found out how to solve this problem

  Hello Shelly,

  Drivers could easily be the cause - or it could be quite a few other things.

  I recommend a restore of the system to a restore point before you did what you did (when it was working fine).  If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Y at - it virus? -Causing blue screens and random reboots

  Y at - it of viruses out there that are affecting the computers and blue screens and random reboots of the origin?

  There is, but your problems could be caused by other issues too,

  Tell us the information on your computer and we give information about the problem.

  you do something specific when you get the blue screen?

  you have anti-virus (what kind)

  did you install any software/hardware recently?

  a good way to fix a wide variety of pc problems is to run a chkdsk

  1. Hold the windows key
  2. Press R
  3. in the box that opens type of command, press enter
  4. type the following echo Y | CHKDSK C: /r
  5. Restart the computer

  It will scan your hard drive for errors that can be caused by being improprley stop, as when the death bluse screen occurs.

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm