Error on startup: "itype.exe" no disc, disc conclude with harddisk5.

Similar Questions

• IType.exe no disc message at startup

  After the start under Vista sp2, I have a warning block that has itype.exe No. disc as the title.  It says disk, enter harddiskx where x is a number, usually 2, sometimes 3 or more.  He proposed to cancel, try again or continue. IntelliType always seems to work although I don't use it that often.

  It is a new problem that began shortly after the installation of SP2.  I tried to do a restore, but he leaves with unidentified error message. I have uninstalled/reinstalled 7.1 Intellitype.  If I take out of the routine of starting intellitype I do not get the message.

  ... Any help please thanks

  Hello imsnowman72,

  It seems that some of the IntelliType fails to load components at startup.

  You must also uninstall the Intellitype software on your computer and restart the computer, when you uninstall software the computer restart and check if you have the same problem.

  Then you can go on installing the software afterwards.

  I suggest that you remove the Intellitype software, using the Windows Cleanup utility. Here is a link you can follow the installation of the Windows Cleanup utility.

  You can download Windows Install CleanUp Utility starting from Microsoft Download Center:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Or

  http://support.Microsoft.com/kb/290301

  Here's what you should do with the Windows Cleanup utility.

  Once you download and install the cleanup utility. You can go to start, all programs.

  Open the utility cleaning and it lists all the programs installed on your computer. Search the Adobe reader on the computer and then install it.

  You can follow the link below to download the Intellitype software for the version of your Windows following the link below:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• nwiz error at startup "nwiz.exe hs has encountered a problem and needs to close. We are Sorrel for the inconvenience. »

  original title: nwiz error at startup

  I get an error on nwiz to restart early upward. The error indicates nwiz.exe hs has encountered a problem and needs to close. We are money for the inconvenience.

  I then send an error report to Microcosft. They respond with: a problem of NVIDIA graphics driver. NVIDIA Graphics Driver has stopped working properly. To resolve this issue, go to the NVIDIA Corporation website to download and install the update:

  At this point, I tried to contact NVIDIA, but they ae not able to provide any information on the update I need.

  I use HP pavilion 754n, Windows XP service pack 3. Presume the NVIDIA was delivered on my computer in 2002. All of the suggestions.

  Thank you

  lostisfound

  Hello

  The video card drivers are corrupted on your computer please uninstall the graphics card in the Manager of devices and then re - install the latest drivers from the manufacturer's website.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  Reference:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  How to solve the problems of hardware with Device Manager
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• IType.exe no disc

  When I start first with Vista sp2, I get an error message like above.  The body says 'enter the hard disk drive. Given the options to cancel tryagain or continue.  Hit try again got rid of the message and everytihing seems to work OK.  I have uninstalled/reinstalled with the latest intellitype. No help.  Any ideas? Thank you

  Hi imsnowman72,

  This can probably occur due to corruption in the registry for the key intellitype.
  You need to remove its entry in the registry and more later to download and install the latest drivers intellitype on the manufacturer's Web site.

  You can download and install the Windows install cleanup then start the cleaning utility in the start menu and then to delete the entries for the intellitype software, and then restart the computer for the changes to take effect and now reinstall the software and check.

  Description of the Windows Installer Cleanup utility
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  See the link below to download the Intellitype drivers.
  http://www.Microsoft.com/hardware/downloads/default.mspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Foxfire.exe no disc? error

  When I try to implement my foxfire browser I get a message saying foxfire.exe - no disc, there is no disc in the drive, insert a floppy in G? Why is I get this every time? If someone on my computer moved something they shouldn't?

  You can ask experts from Firefox to the following:

  Support Firefox, Mozilla Forums:
  http://forums.mozillazine.org/viewforum.php?f=38

  Mozilla Firefox Forum
  http://www.firefoxforum.com/

  Firefox Support Forum
  http://support.Mozilla.com/en-us/questions

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error at startup of disc

  Whenever I boot, I get the message

  "Read a disk error has occurred."
  Press Ctrl-Apt-del to restart. "

  The only changes I made were resize the partition about 60 GB with gparted (remember, the windows partition had about 260 GB free in any case) and installed ubuntu on this very place, I released. Basically, now everytime I try to boot Windows I get this error. It's only a few minor drawbacks at the moment, but I'd appreciate something to help me get to use my application. [b] on ubuntu, I can mount the complete file system, browse and correct it. [/ b] The file system is very good, the hard drive is fine.

  If you can help at all, please, I have an Acer Aspire M1100 with stock hardware installed. Do not run Windows 7 my Dell Dimension 3000 shit goes, that's why I have Windows XP installed.

  Hi Mike - I found this thread through a search - I hope this is OK to post here...

  I now get the same error message on my PC (Dell Dimension 4100) after the x Sockets in my house jumped - off the PC - and then back on later. PC has XP Professional on it. I looked through the XP CD Recovery Console - chkdsk reported mistakes - I've also run fixboot and fixmbr but I get the same error at startup. I don't seem to be able to start using the XP CD.

  Have you advice? In addition, my partners laptop has Vista and a DVD - RW drive - I would be able to make a disk bootable CD to start XP?

  Thanks, Nobby

  Chris,
  If you put a different HARD drive in your current machine with existing XP is installed, you can have a bit of a problem.  If XP has been installed on the drive in another machine then it will search for the material of the other computer.  So if you put another drive in this machine, you may have to reinstall XP on it.  Or you can put this drive in another machine as a slave drive and save your files.  Anyway I think that you will be able to recover your information since you were able to do an installation to and able to navigate so that in the Recovery Console.
  Once you have your data safe, I would check with Western Digital for a disk utility that can test the drive completely.  At this point, he may be able to format and mark bad sectors and make it again completely usable.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Acrobat.exe - no disc. There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR1.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".
  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".

  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I had the same error today and found the answer to my question.  Acrobat attempts to retrieve a file on a removable disk, which is no longer present.  In my case, it's an SD card.  I reinserted the card in the reader and acrobat then asked if I wanted to recover the file, to which I said no. Acrobat no longer shows the message at startup.

• Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

  Original title: \Device\Harddisk2\DR2

  I get this popup of the application:

  Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

  How can I get rid of it? I don't mean to access drive... it just popup as soon as I open my computer.

  Thank you

  John

  Hello

  ·         Do you get this error message when you restart computer?

  ·         You will remember to do recent changes on the computer before this problem?

  ·         You are able to open Internet Explorer?

  ·         You have a hard drive connected to the computer?

  I suggest to restart the computer in safe mode and let us know the status of the issue. Follow the steps in the link to start the computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Please see the link: how to fix explorer.exe - error disc no.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/how-to-fix-explorerexe-no-disk-error/76ef7ebd-5FCD-4c6e-9f33-50b6aae4a4e9

  You can also have a look at the following Suggestions for a question on the help forums:

  http://support.Microsoft.com/kb/555375

• Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and feature on Eleme

  Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and function on 12 items, it has worked well. I reinstalled the 13 items that was no help. Note it is very difficult to get rid of this box, it crashes the program elements sometimes

  mnicolett4

  What operating system is involved? Assuming that Windows 7, 8 or 8.1 64-bit for now.

  There is a known No Disc error associated with the elements first 13/13.1. The Adobe fix is the removal or disabling of the OldFilm.AEX file. Let us determine if this applies to your situation.

  The file OldFilm.AEX that you remove or disable renaming in OldFIlm.AEXOLD is located in the path of 64-bit Windows 7, 8 or 8.1 of

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming in OldFilm.AEXOLD.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add on... Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project? If this isn't the case, please do.

• error on startup: "error loading ozujufuxuzedesuv the specified module rundll32.exe is not found."

  I only get the error at startup code. "error in loading rundll32.exe ozujufuxuzedesuv the specified module cannot be found"

  You have a virus or other such pest or it could be the remnants of a pest that has been deleted by your AV software  Run a Malwarebytes and SUPERAntiSpyware scan on your machine and see if things change.

  http://www.Malwarebytes.org/
  http://SUPERAntiSpyware.com/

  John

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• hpqwutils.exe - no disc

  I just bought HP Pavilion g6 1210sa and every time I log on the message above is displayed. That is to say. hpqwutils.exe - no disc.

  How to stop what happens please.

  Here is a quick solution for everyone, download program CCleaner which is free! Once you have installed and fireup the app, go to tools and then starts. Select the HPQuickWeb Proxy, and then click Disable in the right corner of the window. Restart your computer and see if the message persists.

  I hope this will fix the "annoying message!

  dingsky45
  Themanw/a.45

• Microsoft Visual c ++ runtime library error at startup. Runtime error! Program: C:\Windows\Explorer.exe

  Original title: Microsoft Visual c ++ runtime library error to star up

  Microsoft Visual c ++ runtime library error at startup

  Runtime error!
  Program: C:\Windows\Explorer.exe
  I can't solve this problem.
  I tried these solutions:
  I deleted all versions of Microsoft Visual c ++ s old and re-installed Microsoft Visual c ++ 2010 and all other microsoft automatic updates
  AutoFix used to define Internet Explore to the initial state (deleted programs side)
  Clean boot startup: error always happens after I uncheched all stars including Microsoft services services
  Start in safe mode: error persists
  Done a full virus scans (avira and f-secure online)
  I tried to restore Windows but there is error and can't do.

  Hello

  This error message or when you tried to restore Windows?

  I suggest you try to create a new user account and check if it helps.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, here is fix a corrupted user account:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• How to close the file of hpqwutils.exe - NO DISC

  hpqwutils.exe - NO DISC continues to display on the screen. I click the x and it returns back. When I quit the screen says that it must be closed and I tried everything but it does not close.

  been on the phone with the technique taken in charge and you can just remove the program hpquickweb, ive done it and now the computer is no longer interrupt me with no disk in the hard disk box that I could never cancel or close.  go to control panel of configuration then programs and recommended scroll fast web hp then to uninstall, hope this help u, say ok and Yes to all the boxes take off til then stop computer and open again and it should be gone, mine did, otherwise contact support prostheses, I found them very useful, if you tell them u had to pay as u go phone they even called me back

• Windows - error 0xc000000f Startup Manager

  To the title of the info, it reads: an error occurred trying to read the boot configuration data.

  I insert the disc to reinstall my computer does not restart with the disc and press ctrl + alt + delete. ):

  Am I doing this wrong?

  Once you have started on the DVD, then follow these steps:

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  
  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.