Error on the numeric keypad

Hi, I have a Lenovo Thinkpad Edge E530c. The problem is that when I press on the dot (.) on the pavement that it happens as a decimal point (.).

Is there a setting I need to change to make it work as it should?

Check the regional settings? You have a standard keyboard of American English?

Tags: ThinkPad Notebooks

Similar Questions

  • the numeric keypad keys do not work

    A little different problem here:

    Just bought my dv7-1030eb. On this keyboard is QWERTY Belgium (well, i live in Belgium, so it's OK)

    Unfortunately, the numeric keypad keys work except for the top 4 (home, end, pgup and pgdn).

    Result: I can not activate Numlock.

    Trying to connect an external keyboard and activate Numlock.

    On the external keyboard, everything works as expected.

    On the keyboard internal, still no light locking num (below altec lansing logo), and yet only four albums keys (home, end, pgup and pgdn) operational.

    It is also a diagnostic message?

    A reply to a message on the page, message 4 @BernsBelgium

    It is a problem, that I was just trying to solve on a dv7-1002.

    I found that the solution has been updated of the bios.

    I was on a version very early and found that I had to do incremental updates. From the one after the current bios, if you try to jump the updates, it fails to the version checks and gives an error "is not any ROM file in this directory"".»

    Keys num started working after about five updates and continued to work for the rest. I had to do about 10 updates to get the current bios. The keys are now working very well.

    Hope this helps someone else.

  • Satellite Pro P300 - always 1 is displayed using the numeric keypad

    Hello

    I recently bought a Toshiba Satellite Pro P300, it has been the problem for free for 4 weeks.

    Now, when I try to use the numeric keypad on the keyboard what is displayed on the screen is '1' any number of type i.

    Does anyone know how can I fix?

    Hello

    I think it's a question that should be checked by a Toshiba ASP.
    I googled a bit but and someone has reported that a parameter must be changed to DMI

    I think that this can be done by a technician of ASP.
    Then you should get in touch with the guys and should ask for help and also handling

    See you soon

  • Envy 17 t-n100: some keys on the numeric keypad does not

    For a few months now, I could not use the /, *,-. 4, 5, 6,., or 0 keys on the numeric keypad. All other keys on the laptop works. I did a few driver updates since then for the keyboard. Sometimes after that several several presses the keys work briefly, then shut down again after a few minutes. In my view, it could be a software problem, I became unable to use the keys on the right after the installation of the application to the emulator Android of Nox.

    Solution

    For me, uninstall the Nox App Player solved the problem immediately. If someone has a similar question on any laptop model and has installed Nox, but didn't need it, I would try that

  • Satellite M60-164, sticking the numeric keypad

    Hello

    I wonder if anyone has experienced any sticky keys on the numeric keypad. I mean only to feel the resistance when you press the keys and they take the time to return to its normal position.
    No.... One looks like it might be food or drink has fallen on the pavement, but it is not the case.

    Thank you

    Nope.
    Given two M60-159 units, keyboard was replaced due to sensitivity of the keyboard problem (some characters are usually missing in the text...), none of the keys to self-retaining noticed on any of four keyboards. Replacement keyboards (revision 01) had a little different twist, but were not much better.
    Also saw two P100-219 units with a similar keyboard, no sticky keys is (keyboard sensitivity OK but not excellent as more old 3000 Toshiba).

    Question (please do not answer, I would really like to know): how is the sensitivity of your keyboard? Leave the characters when the quick entry?
    You may require a guarantee of replacement keyboard for this reason. Or better yet a replacement laptop, if all goes well they're out of M60s and you can get a P100... Personally, I do not change the computers because it takes too long, I just want them to fix the keyboard, but they seem to have given up (I even sent them keyboard replacement for analysis).

  • Satellite P100-240 includes the numeric keypad, and HD Audio and HD video

    Hello

    I will soon buy a Toshiba Satellite P100-240 of LaptopsDirect with a memory upgrade. It says on the site Web of Toshiba, the P100 is not HD Audio and HD video and it also States that it does not include the numeric keypad. Is - this ture? The processor is good on this machine, I mean like a Core 2 Duo.

    It also comes with Microsoft Windows XP Media Center Edition 2005, is it possible for me to get a buyout of Toshiba site upgrade

    I highly appreciate your replys
    Thank you
    Machanic

    Hello

    > Is the processor good on this machine, I mean like a Core 2 Duo

    The CPU is not better than Core 2 Due because he s successor to core Duo.
    Intel Core Duo processor T2400 1.83 GHz Yonah works on this laptop.
    You can check the detailed specifications of this CPU Intel page.

    In addition the unit supports audio chip type high-definition Intel Conexant CX20551-22.
    I put t know what you mean by HD video.
    Do you mean the HD player? The portable player is a simple DVD Super Multi drive (+/-R Double Layer) and it does not play any DVD HD

    You can also check this Toshiba page for more details:
    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=119355&Toshib aShop = true

  • HP Pavilion 15 laptop: press the Plus sign (+) on the numeric keypad is too sensitive

    Press the plus sign (+) on the numeric keypad is so sensitive that it is like it is stuck. I have to tap it or even touch it, just gently move the computer or touch the computer around the + key is enough to activate, which translates by +++.

    How can I fix?

    Thanks in advance!

    Hi!, @DMercier:

    ¡Bienvenue, on the Forum!

    Solutions for the problem of keyboard... http://support.HP.com/us-en/document/c03738933

    Portable computer key stuck

    If a key is physically stuck in the down position, you should not have to replace the entire keyboard. Many keyboards have keys that can be removed by inserting a knife to butter under one edge of the button and gently lifting upward on the upper and lower edge. After having removed the key, using a buffer with alcohol, clean the underside of the key and the key on the keyboard slot. Put the key in the snapping it back in place.

  • T420s: how to use the numeric keypad #?

    Do not really understand how to use the numbers on the numeric keypad.

    Please advice where I can find them?

    FN - J - does not work

    Activate the numeric keypad by pressing Fn + NmLk.

    Then you have access using the number keys.

  • Cannot use the numeric keypad codes alt with usb keyboard.

    I just bought a bow of Microsoft keyboard for use with my Vista system. As I am a programmer and the keyboard is missing a number pad (which I use frequently for the entry of characters alt-code), I bought a USB keyboard separated (from Targus - model AKP10CA) mainly to enter alt character codes

    To my dismay, the alt codes don't work! I checked the keycodes that sends the keyboard with a keylogger, and they are the correct numeric keypad keys. So my question is why these don't work with my Microsoft Arc keyboard alt key, and what I can do about it?

    Thank you.

    Well, at least we have excluded the keyboard as the problem - I don't really think it was but it was worth checking out.

    I don't know (I don't use keyboard shortcuts), but have you tried turning on the number lock on your keyboard and using the numbers on the different keys on the keyboard that are used instead of a numeric keypad when you don't have available?  I don't mean the numbers at the top (I know that they do not work) but if you set the keyboard for some keys work as a numeric keypad, and then perhaps shortcuts using these buttons by activating the NunLock will work as expected.  Always turning on one off the NumLock sort of defeats, the goal to make shorter (but it can work entirely from the keyboard that was your question).

    I do not think it is possible to get this work because the keyboard and the numeric keypad USB are separate devices and do not speak to one another - can 'see' what is happening on the other device and there is therefore no way to make them work in oncert.  The system does not recognize that the two entries are supposed to actually a single action and I don't know any way to tell the system how to do if it is possible at all (even with a registry change).  I have no idea where to start comiing even upward with a workaround.  I think you just need to live with the fact that you can not use the devices together to issue commands.  Maybe you can change some of the most frequently used shortcuts involving the keypad for a different shortcut, not requiring that the keyboard - shortcuts can be re-scheduled (and if you can not re - schedule a current shortccut you ccan still create a new shortcut using only the keyboard, which performs the same function).

    I'm sorry, there is no real solution to your problem, but it's the way Vista works and we just have to live with it, the better we can.

    Good luck and best wishes!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Calculator accepts no input on the numeric keypad

    I am running Vista Home Premium SP1, if that makes a difference.  How can I get my calculator to let me use the numeric keypad for data entry?

    First press the Numlock key.

  • How to activate the numeric keypad on the keyboard from office 2000

    I use Vista. Works keyboard and mouse Microsoft wireless desktop 2000, but I can't the numeric keypad to work. How can I activate the NumLock?

    Hi Fredfraley,

    I suggest you to consult the article in the Microsoft Knowledge Base and check.

    Troubleshoot the State of Numlock, SCROLLLOCK, lock and CAPS LOCK keys.

    http://support.Microsoft.com/kb/894037

    I hope this helps.

  • How can I configure "Numlock" as a default setting for the numeric keypad on Pavilion DV7?

    Sometimes trying to enter numbers using the numeric keypad, numbers will not enter, or navigation keys are activated.

    To set the numlock WE as value by default when you log in, you will need to edit the Windows registry.

    HKEY_USERS\. Default\Control Panel\Keyboard

    Change the InitialKeyboardIndicators value in 2

  • Zero on the numeric keypad does not work

    I use windows 8 and press zero on the numeric keypad does not work.  It is used to work and then just stop.  All solutions?  All the other numbers work very well.

    Thanks for any help.   KP

    I've seen other people talk about that here on this site, and in all cases so far, it's the "fn lock" or "function" on their keyboard (usually a laptop keyboard).  The zero key is used for anything else until you disable the lock feature.

    Example on the web:

  • How to force the numeric keypad on a number field element?

    Hi, I received a form on the Apex, and I have a 'number field' field type, but when I n my mobile (android) I click the field to enter data, I get a normal keyboard, not the numeric keypad.

    I use a mobile model of jquery on apex 4.2

    Thanks in advance.

    Declarative options 4.2 not quite there yet

    -Plugin - point HTML5 entry point

  • SpeedGrade will not meet the numeric keypad keys / partially cut 2nd monitor image

    Very strange... I just opened a project in Speedgrade. When I started working, I noticed that the keys of the numeric keypad do not work. In addition, the changes made with the mouse are delayed. Apart from that, I use a second monitor and about a quarter of the picture from the left edge is cut. First works very well, it is quite another thing, it's a brand new computer. I tried all the usual stuff like reboot I even uninstalled and re-installed, but to no avail. I use the latest version of speedgrade on a system 4790 Windows 8.1 Intel i7 with 32 GB of RAM and a card GTX 780. Does anyone have ideas, what could happen?

    Hello

    You did that the display in the window of parameters setting are set correctly? You can manually adjust the resolution of your screen in the second.

    For the delay, have you created a mask in your project?

    Thank you

    Fran

Maybe you are looking for